Manual de instrucciones de Allstar Products Group 8833 OCS

Resumen del contenido incluido en la página 1

READ THIS MANUAL CAREFULLY
BEFORE BEGINNING
MODELS:
COMMERCIAL
• 831, 8833 OCS: 1-DOOR
• 733, 8833C OCS: 3-DOOR
TRANSMITTER
• 639: 9-DOOR
•
535: 27-DOOR
INSTRUCTIONS
PRODUCT FEATURES
Allstar Commercial Transmitters are designed to work with Allstar Receivers. Some models are designed to operate multiple
receivers. A selector switch on the Transmitter determines which door will be controlled in a multi-door installation. The Receiver is
connected to the commercial operator in the same manner

Resumen del contenido incluido en la página 2

COMMERCIAL TRANSMITTER MODELS IMPROPER WIRING COULD CAUSE ELECTROCUTION OR DAMAGE TO CIRCUITRY. WARNING FOLLOW LOCAL BUILDING AND ELECTRICAL CODES. TO PREVENT ELECTROCUTION DISCONNECT POWER AT FUSE BOX AND DOOR OPENER WARNING BEFORE WIRING PERMANENTLY. The various Transmitter models are shown below. All models may be coded to work with Allstar 3-channel Receivers such as the 831R, 831RE and the 8833R. Refer to the individual instructions for proper wiring of the Receivers. Follow the direction

Resumen del contenido incluido en la página 3

COMMERCIAL RECEIVER & TRANSMITTER CODING INSTRUCTIONS The information below indicates how to set the coding switches in the various transmitters and receivers. IF YOU ARE USING A 8833 OCS-ECONOMY OR 831 STANDARD TRANSMITTER: Exactly match all 8 code switches in the transmitter and receiver. The code switches TRANSMITTER RECEIVER may be set in any random pattern of +, - and 0. A-B-C Selector Coding Switch Switch Position #6 A+ IF YOU ARE USING A 8833C OCS-ECONOMY OR 733 STANDARD TRANSMITTER

Resumen del contenido incluido en la página 4

TROUBLESHOOTING GUIDE If you experience distinctive problems with the Transmitter and External interference (such as radio towers). Receiver, try some of the suggestions listed below before calling Change to a different frequency. the Factory Technicians. Stuck transmitter in building. Change code switches from factory settings. RECEIVER APPEARS DEAD; THERE IS NO RESPONSE WHEN Check battery in transmitter. TRANSMITTER BUTTONS ARE PUSHED. ONE RECEIVER WORKS BUT THE OTHER IS DEAD. Check the power