Resumen del contenido incluido en la página 1
VHF 7000,
7100US, 7100EU
Operation Manual
NAVMAN
w w w . n a v m a n . c o m
Resumen del contenido incluido en la página 2
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide a reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee tha
Resumen del contenido incluido en la página 3
Contents Section 1 - General Information .............................................................. 5 1-1 Features.................................................................................................... 5 1-2 Customizing Your Navman VHF Radio ..................................................... 6 1-3 How to Display and Navigate Menus ........................................................ 6 1-4 How to Enter Alphanumeric Data......................................................
Resumen del contenido incluido en la página 4
4-3-2 Edit Group Name Details .................................................................. 22 4-3-3 Delete a Group.................................................................................. 23 4-4 Response to Individual Calls (INDIV REPLY) ......................................... 23 4-5 atis MMSID & ATIS FUNCTIONALITY.................................................... 23 4-5-1 Enter or Edit YOUR ATIS MMSID ..................................................... 23 4-5-2 Enable ATIS
Resumen del contenido incluido en la página 5
Section 1 - General Information 1-1 Features Congratulations on your purchase of a Navman VHF 7000, 7100US, or 7100EU marine band VHF radio. All of these models provide the following useful features: • prominent channel display • adjustable contrast settings for the LCD • adjustable keypad backlighting for easy night-time use • waterproof and submersible to comply with JIS-7 • GPS latitude and longitude (LL) and time display (when connected to a GPS) • choice of High or Low (25 W or 1 W) tra
Resumen del contenido incluido en la página 6
1-2 Customizing your Navman VHF Radio You can customize the radio to suit your individual preferences. Some preferences can be set directly through the keys as explained in this Section. Other preferences are set up through the built-in menus and these are explained in the other Sections. 1-3 How to Display and Navigate Menus 1. Hold down MENU (or CALL/MENU). Note that only four menu items can be displayed at any one time on the screen. 2. Press + CH - to scroll up and down the menu until the
Resumen del contenido incluido en la página 7
Symbol Meaning TX Transmitting. HI LO Transmission power. High (HI) 25W or Low (LO) 1W. WX Weather channel. WX ALT Weather Alert. Alarm beeps will sound. VHF 7100US only. BUSY Receiver busy with an incoming signal. PRI Priority channel is selected. D Duplex operation. Otherwise, blank for Simplex operation. LOCAL Local calling is selected. Otherwise, blank for distance calling. DSC DSC capability is available. VHF 7100US and VHF 7100EU only. Incoming DSC call. Low Battery warnin
Resumen del contenido incluido en la página 8
1-6 Basic Operation and Key Functions All possible keys and their functions are listed. Note that some of the keys are not available depending on your Navman VHF radio model. Key Function VOL/PWR Volume and Power. Turn clockwise to power on. Continue to turn until a comfortable volume is reached. VOL/PWR will also adjust the settings of an external speaker, if connected. SQL Squelch or Threshold Level. Sets the threshold level for the minimum receiver signal. Turn fully counterclockwise unt
Resumen del contenido incluido en la página 9
H/L Transmission Power. High (HI) 25W or Low (LO) 1W. Press to toggle between high or low transmission power for the entire channel bank. The HI or LO selection is shown on the LCD. Some channels allow only low power transmissions. Error beeps will sound if the power transmission setting is incorrect. Some channels allow only low power transmissions initially, but can be changed to high power by holding down H/L and PTT at the same time. See Appendix C for a complete listing of channel c
Resumen del contenido incluido en la página 10
+ CH - Channel Select. Also on the microphone. The current channel is shown on the screen in BIG digits with an appropriate designator suffix A or B in small letters below the channel number. Press + or - to step through the available channels one at a time, or hold down to scroll rapidly through all the available channels. See Appendix C for a listing of channel charts. Alphanumeric Entry. This key can also be used for menu selection and for alphanumeric entry. Press + or - to scroll th
Resumen del contenido incluido en la página 11
Section 2 - The Radio Menu (MENU) 2-1 Radio Menu Options (Menu) The following options are available through MENU (or CALL/MENU): Maintain your buddy list. BUDDY LIST See Section 2-2. Set radio sensitivity. LOCAL/DIST See Section 2-3. Set backlight level. BACKLIGHT See Section 2-4. Set contrast level. CONTRAST See Section 2-4. Set position & UTC manually. MANUAL GPS/DATA See Section 2-5. SETTING Set local time and time format. See Section 2-5. USER MMSID DSC SETUP DSC Setup Menu. GROUP S
Resumen del contenido incluido en la página 12
2-2 Maintain Your Buddy List (BUDDY LIST) VHF 7100US and VHF 7100EU only. Use the Buddy List to store the names and associated MMSIDs of 20 MENU SELECT favourite people. Names are stored in the order of entry, with the most >BUDDY LIST recent entry shown first. LOCAL/DIST BACKLIGHT The following sections show to use BUDDY LIST to add, edit, and delete entries on your buddy list. Section 3 explains how to call a buddy. 2-2-1 Add an Entry ENTER NAME ENTER NAME BOB BUDDY LIST –––––––––––– BOB 12
Resumen del contenido incluido en la página 13
2-2-3 Delete an Entry DELETE BUDDY BUDDY LIST BUDDY LIST TOM TOM >MANUAL NEW MANUAL NEW EDIT >YES ALEX ALEX >DELETE NO TOM >TOM 1. Select BUDDY LIST. Press ENT to display the list of entries. 2. Scroll down (if required) to the entry you want to delete and press ENT. 3. Select DELETE then select YES. 4. The entry is deleted immediately and the buddy list is displayed again. 2-3 Local or Distance Sensitivity (LOCAL/DIST) Use LOCAL/DIST to improve the sensitivity of the receiver either locall
Resumen del contenido incluido en la página 14
2-4-1 Set the Backlighting Level 1. Select BACKLIGHT. BACKLIGHT 2. Select a comfortable backlight level using + or - to change the setting. LO HI 3. Press ENT to enable the setting and return to the menu. Note that the DISTRESS key backlighting cannot be switched off. 2.4.2 Set the Contrast Level 1. Select CONTRAST. CONTRAST 2. Select a comfortable contrast level using + or - to change the setting. LO HI 3. Press ENT to enable the setting and return to the menu. 2-5 GPS Data and
Resumen del contenido incluido en la página 15
GPS/DATA GPS/DATA TIME OFFSET MANUAL >TIME OFFSET >+01:30 >SETTING TIME FORMAT TIME DISPLY 02:30PM LOC 1. Select GPS/DATA, then SETTING. 2. Select TIME OFFSET to enter the difference between UTC and local time. Half hour increments can be used with a maximum offset of ±13 hours. In this example, a difference of +1.5 hours has been entered and the local time is displayed with the suffix LOC. 1 1 10 9 8 7 6 5 4 3 2 1 0 1 2 3 4 5 6 7 8 9 10 1 1 9 8 4 9 3 5 7 1 5 8 6 6 7 8 3 9 1 5.5 0 12 5 4
Resumen del contenido incluido en la página 16
However, if the vessel position is being updated through a GPS navigation receiver, you can switch the time display on the screen ON or OFF as follows: 1. Select GPS/DATA, then SETTING. GPS/DATA TIME DISPLY 2. Select TIME DISPLAY. TIME OFFSET ON 3. Select ON (on) or OFF (off) as desired. TIME FORMAT >OFF In this example, OFF has been selected >TIME DISPLY and so the screen no longer shows the time. If the time display is set ON, course and speed data are not displayed on the LCD (see sect
Resumen del contenido incluido en la página 17
2-6 GPS Simulator (SIMULATOR) The GPS Simulator is set to OFF whenever the radio is turned ON or whenever real GPS data is available through the COM port. However, if you want to test it, turn it on. 1. Select GPS SIM, then select ON (on) or OFF (off) as desired. MENU SELECT DSC SETUP Whenever the GPS Simulator is turned ON (on), simulated RADIO SETUP Speed Over Ground (SOG), Course Over Ground (COG), >GPS SIM and LL position appear on the screen. This data is updated automatically
Resumen del contenido incluido en la página 18
Section 3 - Radio Setup Menu (RADIO SETUP) 3-1 Radio Setup Menu (RADIO SETUP) Edit or delete channel names. CH NAME See Section 3-2. Set the volume level of the incoming call notification beeps. See RING VOLUME section 3-3. BEEP VOLUME Set the volume level of the beeps. See section 3-3. Switch ON/OFF (on/off) the radio’s internal speakers. See INT SPEAKER section 3-4. WATCH MODE Selects the operation of Dual or Tri watch scanning. See section 3-5. (Selects if the WX Alert scanning mode is
Resumen del contenido incluido en la página 19
4. Press ENT (repeatedly if necessary) to display the YES/NO confirmation. 5. Press ENT to confirm the new channel name tag or the deletion, then press ESC to return to the menu. 3-3 RING & BEEP Volume (RING VOLUME) & (BEEP VOLUME) Set the volume level of the incoming signal beeps (RING VOLUME) and/or the error and warning beeps (BEEP VOLUME) to HIGH (high) or LOW (low) as follows: RING VOLUME BEEP VOLUME RADIO SETUP >HIGH >HIGH CH NAME LOW LOW >RING VOLUME OFF BEEP VOLUME 1. Sel
Resumen del contenido incluido en la página 20
3-6 Weather Alert (Wx ALERT) VHF 7100US only. The NOAA provides several weather forecast channels on USA and Canadian channel banks. If severe weather such as storms or hurricanes are forecast, the NOAA broadcasts a weather alert on 1050 Hz. You can set up the radio to pick up weather alerts, as follows: 1. Select RADIO SETUP, then WX ALERT. RADIO SETUP WX ALERT INT SPEAKER ON 2. Select ON (on) or OFF (off) then press WATCH MODE >OFF ENT to enable the setting and return to >WX ALERT
