Manual de instrucciones de Dakota Alert Inc.WHT-3000

Resumen del contenido incluido en la página 1

™
Dakota Alert
WHT-3000
Wireless
Rubber Hose
Transmitter
Owner’s Manual

Resumen del contenido incluido en la página 2

Warnings This device complies with Part 15 of the FCC rules, Operation of this device is subject to the following conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference, including interference that may cause undesired operation. Installation: The WHT-3000 transmitter consists of a transmitter box and 25 feet of hose. To install, connect the hose to the stem on the transmitter box, then lay the hose across the driveway. Mount the transmitte

Resumen del contenido incluido en la página 3

Operation: The control box is powered by one 9-volt battery. Coding the transmitter: 1. Open the transmitter box. The first thing you will see is the air switch (Figure 2). Directly below the air switch is the transmitter’s radio (Figure 3). 2. Locate the dip switches on the radio  . 3. Switches 1-8 are for the frequency setting 3 to 4 ft (256 combinations). They are set at the factory to the on position in both the receiver and transmitter. If needed, set switches 1-8 ,

Resumen del contenido incluido en la página 4

1 2 3 figure 2 figure 3 4. { {

Resumen del contenido incluido en la página 5

Table to select tones: Note: If more than one transmitter is used Switch Switch Channel 12-volt Tune with the receiver, the first eight dip switch- 9 10 DC output es of all transmitters must match the eight On On 1 Yes Classical dip switches of the receiver. Off On 2 No Westminster Note: Whenever a change is made to the On Off 3 No Ding Dong time jumper or the dip switches, the re- Off Off 4 No Whistle ceiver must be turned OFF and then back ON to operate properly. Coding the receiver: Frequenc

Resumen del contenido incluido en la página 6

Troubleshooting the WHT-3000 If the transmitter is not detecting, try one of these: • Change the battery in the transmitter. • Make sure the transmitter and receiver are coded alike. • Move the transmitter closer to the receiver. • Keep the transmitter away from large metal objects that may interfere with the radio signal. • Adjust the screw on the air switch in the transmitter (Figure 2)  by turning it clockwise. This will increase the sensitivity. • If the contacts are touching, the system

Resumen del contenido incluido en la página 7

TECHNICAL SUPPORT If you encounter any difficulty in the operation of this product after reading the manual, please contact us. You can reach us by phone at 605-356-2772 from 8:30 AM to 5:00 PM Monday through Friday (Central Standard Time). We will be happy to answer your questions and help you in any way we can. Dakota Alert warrants this product to be free of defects in material and workmanship for a period of one year from the date of purchase. This warranty does not cover damage resultin

Resumen del contenido incluido en la página 8

Dakota Alert, Inc. 109 W. Main St. P0 Box 130 Elk Point, SD 57025 Phone: (605) 356-2772 Fax: (605) 356-2584 Web: www.dakotaalert.com 8.