Manual de instrucciones de Sharp Model AFT

Resumen del contenido incluido en la página 1

KODAK EKTAGRAPHIC III Slide Projector, Model AFT

The KODAK EKTAGRAPHIC III Slide Projector, Model AFT, is a modified version
of the standard Model A projector. A timer-with-fade feature was added
specifically for use in cinema pre-show applications. It was available to a limited
number of companies involved with theater pre-show advertising systems. It was
not for sale through normal audio-visual channels for general use.

Kodak is providing this information as there have been a few in

Resumen del contenido incluido en la página 2

KODAK EKTAGRAPHIC III AFT Projector PRODUCT DESCRIPTION Congratulations on the purchase of your KODAK EKTAGRAPHIC III AFT Projector. Please review this product sheet and the important maintenance instructions enclosed. The KODAK EKTAGRAPHIC III AFT Projector is a standard KODAK EKTAGRAPHIC III A Projector with fade and timer controls added. This projector was specifically designed for cinema applications and therefore does not include a slide tray, lamp, lens, user manual, or remote control. FAD

Resumen del contenido incluido en la página 3

Important Safety Instructions IMPORTANT: Your KODAK EKTAGRAPHIC III AFT Projector is supplied with a 3-wire grounding power cord to comply with UL122 and CSA222 Safety Electronics Standards. We urge you to provide a permanent, properly installed 3-wire receptacle as the source of power for this projector. Your projector is designed to operate with 110 to 125 volts, 60 Hz current only. Incorrect voltage could cause the projector to malfunction. Inputs in excess of 125 volts will adversely affec

Resumen del contenido incluido en la página 4

Troubleshooting Guide PROBLEM CAUSE CORRECTION Projector does not operate No power to projector Plug power cord into suitable electrical outlet. Set power switch to LAMP. No illumination on screen with Power switch on Off or Fan Set switch to LAMP. slide in projector gate Lamp burned out Install new lamp or lamp module. Lamp not sealed in socket Check lamp. Slide not in proper focus on Slide itself not sharp Examine slide for proper focus. screen First slide in tray not properly Focus center of

Resumen del contenido incluido en la página 5

Warranty Kodak warrants this KODAK EKTAGRAPHIC Slide Projector to function properly for four years from the date of purchase. If this KODAK EKTAGRAPHIC Slide Projector does not function properly within the warranty period, upon submission of dated proof of purchase, Kodak will repair it without charge, except for worn-out projector lamps. If Kodak is unable to repair the projector, the option of replacement or refund of the purchase price will be available. See an audiovisual products dealer fo

Resumen del contenido incluido en la página 6



    

    

   
                              
    
 
 
     
  
!    
   
 " 

Resumen del contenido incluido en la página 7

   93:63;396.6<((((6#9    "    #6; =(;,  9       (  "   $ >
6*9:
69(6#9 /:?(
=(;,/&@ 
#6;* "/@0   & 
 & (       ' 9     :? $" $   ) 9  "