Resumen del contenido incluido en la página 1
®
ViewSonic
- User Guide
- Guide de l’utilisateur
Pro8450w
DLP Projector
- Bedienungsanleitung
- Guía del usuario
- Guida dell’utente
- Guia do usuário
- Användarhandbok
- Käyttöopas
- Руководство пользователя
- 使用手冊 (繁體)
- 使用手册 (简体)
- 사용자 안내서
IMPORTANT: Please read this User Guide to obtain important
information on installing and using your product in a safe
manner, as well as registering your product for future service. - คู่มือการใช้งาน
Warranty information contained in this User Guide wi
Resumen del contenido incluido en la página 2
Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable prote
Resumen del contenido incluido en la página 3
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this unit near water. 6. Clean with a soft, dry cloth. 7. Do not block any ventilation openings. Install the unit in acco rdance with the manufacturer’s instructions. 8. Do not install near any heat so urces such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat. 9. Do not defeat the safety
Resumen del contenido incluido en la página 4
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Substance Actual Concentration Concentration Lead (Pb) 0.1% < 0.
Resumen del contenido incluido en la página 5
Copyright Information © ® Copyright ViewSonic Corporation, 2010. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Inc. Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. VESA is a registered trademark of the Video Electronics Standards Association.
Resumen del contenido incluido en la página 6
CONTENTS Ceiling mount installation ...............59 Introduction ...................5 Projector Features ............................ 5 Appendix ..................... 60 Package Contents ............................ 6 LED Indicator Messages ................60 Projector Overview ........................... 8 Compatibility Modes .......................61 Troubleshooting ..............................63 Using the Product .......10 IR Control Code ..............................66 Control Panel ...
Resumen del contenido incluido en la página 7
Introduction Projector Features The projector integrates high-performance optical engine projection and a user - friendly design to deliver high reliability and ease of use. The projector offers the following features: Single chip 0.65" Texas Instruments DLP® technology WXGA (1280 x 800 pixels) Auto image re-sizing (Auto-Sync.) to 1280 x 800 full screen with scaling compression compatibility for VGA, SVGA, XGA, SXGA and WXGA. Compatibility with Macintosh® computers Compatibility with NTSC
Resumen del contenido incluido en la página 8
Package Contents When you unpack the projector, make sure you have all these components: Projector with Lens Cap AC Power Cord Remote Control (IR) & batteries VGA Cable (D-SUB to D- ViewSonic CD Wizard Quick Start Guide SUB) Optional accessories Filter cover RS232 cable RGB to component adapter P/N: P4R34-4600-00 P/N: J2552-0208-00 P/N: J2552-0212-00 ViewSonic Pro8450w 6
Resumen del contenido incluido en la página 9
Projector Carrying Case Contact you dealer immediately if any items are missing, appear damaged, or if the unit does not work. Save the original shipping carton and Packing material; they will come-in handy if you ever to ship your unit. for maximum protection, repack your unit as it was originally packed at the factory. ViewSonic Pro8450w 7
Resumen del contenido incluido en la página 10
Projector Overview Front View 13 12 11 10 9 7 8 1 2 3 4 5 6 Lens cap Filter cover 1 8 Elevator button Speaker 2 9 Elevator foot Focus ring 3 10 Lens cap strap Zoom ring 4 11 Projection lens Control panel 5 12 Front IR remote control sensor Lamp cover 6 13 Ventilation holes (intake) 7 ViewSonic Pro8450w 8
Resumen del contenido incluido en la página 11
Rear View 2 3 4 6 1 5 Connection ports 1 AC power socket 2 Kensington lock 3 2 Rear IR remote control sensor 4 Speaker 5 Ventilation holes (exhaust) 6 5 Bottom View 3 1 2 Ceiling mount holes (M4*8) 1 Tilt-adjustment feet 2 2 Security bar 3 This projector can be used with a ceiling mount for support. The ceiling mount is not included in the package. Contact your dealer for information to mount the projector on a ceiling. ViewSonic Pro8450w 9
Resumen del contenido incluido en la página 12
Using the Product Control Panel 9 1 2 3 4 8 5 6 11 10 6 7 4 Power (Power LED indicator) 1 Refer to “LED Indicator Messages”. TEMP (Temperature LED indicator) 2 Refer to “LED Indicator Messages”. LAMP (Lamp LED indicator) 3 Refer to “LED Indicator Messages”. Keystone/Arrow keys ( /Up, /Down) 4 Manually correct distorted images resulting from an angled projection. Four directional buttons 5 Use four directional buttons to select items or make adjustments to your selection. ENTER 6 Enter to
Resumen del contenido incluido en la página 13
Connection Ports 1 2 3 5 6 7 8 9 4 18 17 16 15 14 13 12 11 10 RS-232 1 When operating the projector via a computer, connect this to the controlling computer's RS-232C port. Monitor Out 2 Connect to a computer display, etc. Component (Y Cb/Pb Cr/Pr) 3 Connect Y Cb/Pb Cr/Pr output from video equipment to this jack. S-Video 4 Connect S-Video output from video equipment to this jack. Service 5 This connector is for firmware update and mouse function support. USB B 6 USB display supports computer co
Resumen del contenido incluido en la página 14
Audio Out 12 Connect to a speaker or other audio input equipment. Audio 2 13 Connect an audio output from video equipment or computer to this jack. Audio 1 14 Connect an audio output from video equipment or computer to this jack. Audio 3 (L/R) 15 Connect an audio output from video equipment to this jack. Video 16 Connect composite video output from video equipment to this jack. Computer in 2 17 Connect image input signal (analog RGB or component) to this jack. Computer in 1 18 Connect image inpu
Resumen del contenido incluido en la página 15
Remote Control Power 1 Turn the projector on or off. VGA 2 13 Switch input source to Computer 14 in 1 (analog RGB or component)/ Computer in 2 (analog RGB or 15 component) by sequence. 3 16 Source/Page up 3 4 Display the source selection bar. 17 Perform page up function when 5 18 mouse mode is activated. 4 Up/+, Down/- 4 19 When Magnify or Volume button is 6 activated, use them to adjust the 20 7 values. 21 8 Left/Mute 5 22 When the On-Screen Display 9 (OSD) menu is not activated, this 23
Resumen del contenido incluido en la página 16
17 Enter/ Left mouse Using the remote mouse control Confirmed selections. The capability of operating your computer Perform the left button of the with the remote control gives you more mouse when mouse mode is flexibility when delivering presentations. activated. Right/ Lock 18 1. Connect the projector to your PC or When the On-Screen Display notebook with a USB cable prior to (OSD) menu is activated, the #4, using the remote control in place of #5, and #18 keys are used as your compu
Resumen del contenido incluido en la página 17
Installing the Batteries 5. Open the battery cover in the direction shown. 6. Install batteries as indicated by the diagram inside the compartment. 7. Close the battery cover into position. Caution Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Make sure the plus and minus terminals are correctly aligned when loading a battery. Keep the batteries out of the reach of children. There is a danger of death by accidental
Resumen del contenido incluido en la página 18
Remote Control Operation Point the remote control at the infrared remote sensor and press a button. Operating the projector from the front Operating the projector from the rear Do not point the laser directly to the people's eyes (especially small children). There is a danger of injury to the eyes. The remote control may not operate when there is sunlight or other strong light such as a fluorescent lamp shining on the remote sensor. Operate the remote control from a position where the rem
Resumen del contenido incluido en la página 19
Connection When connecting a signal source to the projector, be sure to: 1. Turn all equipment off before making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly inserted. 1 or 2 3 1 11 9 9 677 8 9 10 5 4 12 VGA cable (D-Sub to D-Sub) S-Video cable 1 7 VGA to DVI-A cable Composite Video cable 8 2 USB cable (mini-B type to A type) Audio cable 3 9 VGA (D-Sub) to HDTV (RCA) cable HDMI cable 4 10 Component Video cable Microphone 3.5 mini jack cable 5
Resumen del contenido incluido en la página 20
Connecting a computer or monitor Connecting a computer The projector provides two VGA input sockets that allow you to connect them to both ® ® IBM compatibles and Macintosh computers. A Mac adapter is needed if you are connecting legacy version Macintosh computers. To connect the projector to a notebook or desktop computer: 1. Take the supplied VGA cable and connect one end to the D-Sub output socket of the computer. 2. Connect the other end of the VGA cable to the Computer in 1 or Computer i
