Resumen del contenido incluido en la página 1
Multimedia Projector
MODEL PLC-XF10N
( )
Without Lens
MOD PLC-XF10NL
Owner's
Manual
Resumen del contenido incluido en la página 2
INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the owner's manual, may cause harmful interference to radio communic
Resumen del contenido incluido en la página 3
IMPORTANT SAFETY INSTRUCTIONS All the safety and operating instructions should be read Unplug this projector from wall outlet and refer servicing to before the product is operated. qualified service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply b. If liquid has been spilled into the projector. before cleaning. Do not use liquid or aero
Resumen del contenido incluido en la página 4
TABLE OF CONTENTS PAGE PAGE P-TIMER FUNCTION 34 FEATURES AND DESIGN 5 AUTO IMAGE FUNCTION 34 INTRODUCTION 5 CURSOR FUNCTION 34 COMPATIBILITY 5 MENU OPERATION 35-36 IMAGE RESOLUTION 5 MODE SELECT 35 AUTOMATIC MULTISCANNING SYSTEM 5 SOUND ADJUSTMENT 36 SCREEN MODE 5 LANGUAGE ADJUSTMENT 36 MULTILANGUAGE 5 UNPACKING THE PROJECTOR 5 VIDEO MODE 37-39 TRADEMARKS 5 COLOR SYSTEM SELECT 37 VIDEO SOURCE SELECT 37 INSTALLATION 6-9 PICTURE IMAGE ADJUSTMENT 38 NAME OF EACH PART OF THE PROJECTOR 6 PICTURE SCRE
Resumen del contenido incluido en la página 5
FEATURES AND DESIGN INTRODUCTION The multimedia projector that combines powerful and sophisticated features with easy-to-use, intuitive controls. Built-in multimedia features include audio, a palette of 16.77 million colors and active matrix liquid crystal display (LCD) technology. The projector is ideal for high-performance business, training and imaging applications that demand exceptional color quality. COMPATIBILITY The projector is compatible with many different types of personal computers
Resumen del contenido incluido en la página 6
INSTALLATION NAME OF EACH PART OF THE PROJECTOR FRONT OF THE PROJECTOR INFRARED REMOTE RECEIVER PROJECTION LENS REMOVABLE LENS COVER LAMP COVER SPEAKER REAR OF THE PROJECTOR EXHAUST VENT CAUTION HOT AIR! Air blown from the exhaust vent is hot. Observe the following when handling your projector or choosing a location to install it. l Keep heat-sensitive objects away from the CARRY exhaust port. HANDLE l If you set the projector on top of a metallic INFRARED surface, the surface will become hot be
Resumen del contenido incluido en la página 7
INSTALLATION SETTING-UP THE PROJECTOR l This projector is basically designed to project on a flat projection surface. POSITIONING: l This projector can be focused from 4.9' (1.5 m) ~ 80.7' (24.6 m). l Refer to the figure below as an example when positioning the projector to the screen. THIS PROJECTOR SHOULD BE SET IN THE WAY INDICATED. NEVER HANG THE PROJECTOR, OR FALL DOWN ON ITS SIDE. IT MAY RESULT IN FIRE HAZARD. ROOM LIGHT Maximum Zoom 600" Minimum Zoom The projector should be placed in a r
Resumen del contenido incluido en la página 8
INSTALLATION VENTILATION This projector is equipped with a cooling fan to protect it from overheating. Pay attention to the following to ensure the ventilation and avoid a possible risk of fire and malfunction. l Do not cover the vents with papers or other materials. l Keep the rear grill at least 3.3' (1m) away from any object. l Make sure that there are no objects under the projector. An object under the projector may prevent the projector from taking the cooling air through the bottom vent.
Resumen del contenido incluido en la página 9
INSTALLATION POWER REQUIREMENTS Your projector uses nominal input voltages of 100-120 VAC. The projector automatically selects the correct input voltage. The projector is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system. Consult your authorized dealer or service station if you are not sure what type of power is supplied to your building. AC outlet side (Male) Projector sid
Resumen del contenido incluido en la página 10
CONNECTING THE PROJECTOR TERMINAL OF THE PROJECTOR SIDE OF THE PROJECTOR (CONNECT THE COMPUTER) 2 1 9 8 6 5 USB 1 CONTROL PORT 1 AUDIO 1 ANALOG DIGITAL 10 R L (MONO) USB 2 CONTROL PORT 2 AUDIO 2 3 RG B H V 11 (MONO) RL AUDIO OUT R/C JACK SERIAL PORT ANALOG RGB 4 RL 13 7 12 COMPUTER INPUT-1 TERMINAL (ANALOG HDB 15-PIN) CONTROL PORT-1 CONNECTOR 1 8 Used to connect a computer to the projector. Used to connect a mouse cable to the projector. COMPUTER INPUT-1 TERMINAL (DIGITAL MDR 20-PIN) 2 CONTROL P
Resumen del contenido incluido en la página 11
CONNECTING THE PROJECTOR SIDE OF THE PROJECTOR (CONNECT THE VIDEO EQUIPMENT) 15 18 16 14 VIDEO/Y C/Cb(B-Y) Cr(R-Y) S-VIDEO AUDIO RL (MONO) 19 17 VIDEO/Y C/Cb(B-Y) Cr(R-Y) S-VIDEO AUDIO RL (MONO) 22 20 VIDEO/Y C/Cb(B-Y) Cr(R-Y) S-VIDEO AUDIO RL 21 VIDEO INPUT JACKS-1 (BNC TYPE x 3) AUDIO INPUT JACKS-2 (R and L) 14 19 Used to connect a video source to the projector. Used to connect an audio source to the projector. S-VIDEO INPUT JACK-1 VIDEO MONITOR OUTPUT JACKS (BNC TYPE x 3) 15 20 Used to connec
Resumen del contenido incluido en la página 12
CONNECTING THE PROJECTOR CONNECTING THE COMPUTER CONNECTING TO THE COMPUTER INPUT 1 TERMINAL (ANALOG HDB 15-PIN) Personal computers can be connected to the HDB15-pin (VGA) terminal on the projector. l Connect the computer to these terminals using the VGA cable and VGA/MAC adapter (provided). CAUTION: For projectors, the VGA cable provided is designed to reduce RFI (Radio Frequency Interference) emissions. For regulatory compliance reasons, this cable must be used and must not be replaced by an
Resumen del contenido incluido en la página 13
CONNECTING THE PROJECTOR CONNECTING TO THE MONITOR OUTPUT TERMINAL (ANALOG HDB 15-PIN) This terminal output the information of the selected computer source being viewed on the screen (Computer 1 or Computer 2). When video source ("Video 1" or "Video 2") is selected, this terminal outputs Computer 1 input information. An external monitor can be connected to the HDB15-pin (VGA) terminal on the projector. l Connect the monitor to this terminal using the VGA cable (not provided). Pin No./Signal Pin
Resumen del contenido incluido en la página 14
CONNECTING THE PROJECTOR CONNECTING AN IBM-COMPATIBLE DESKTOP COMPUTER MONITOR CABLE (NOT PROVIDED) COMPUTER BNC CABLE x 5 COMPUTER (NOT PROVIDED) OUTPUT (BNC TYPE x 5) VGA CABLE (PROVIDED) COMPUTER OUTPUT (HDB15-PIN TYPE) AUDIO CABLE (NOT PROVIDED) R COMPUTER SERIAL PORT PS/2 PORT AUDIO OUTPUT L INPUT INPUT COMPUTER INPUT 1 COMPUTER (ANALOG) R L AUDIO INPUT 1 or 2 USB 1 CONTROL PORT 1 AUDIO 1 DIGITAL ANALOG R L (MONO) USB 2 CONTROL PORT 2 AUDIO 2 MOUSE CABLE FOR RG B H V RL (MO
Resumen del contenido incluido en la página 15
CONNECTING THE PROJECTOR CONNECTING AN IBM-COMPATIBLE DESKTOP COMPUTER (DIGITAL INPUT CONNECTION) NOTE: This connection need optionally sold Graphic Accelerator Board. For this information, contact to your authorized dealer. Before using with digital connection, install (Plug in) Graphic Accelerator Board into PCI bus slot of the computer and set up the computer COMPUTER following instructions in the Graphic Accelerator Board package. MONITOR CABLE (NOT PROVIDED) GRAPHIC ACCELERATOR ANALOG DIGIT
Resumen del contenido incluido en la página 16
CONNECTING THE PROJECTOR CONNECTING AN IBM-COMPATIBLE LAPTOP COMPUTER COMPUTER VGA CABLE (PROVIDED) COMPUTER OUTPUT (DB15-PIN TYPE) AUDIO CABLE R (NOT PROVIDED) COMPUTER SERIAL PORT PS/2 PORT AUDIO OUTPUT INPUT INPUT L COMPUTER COMPUTER INPUT 1 AUDIO INPUT 1 R L (ANALOG) USB 1 CONTROL PORT 1 AUDIO 1 ANALOG DIGITAL R L (MONO) MOUSE CABLE FOR PS/2 PORT (PROVIDED) USB 2 CONTROL PORT 2 AUDIO 2 RG B H V RL (MONO) CONTROL PORT AUDIO OUT OUTPUT 1 R/C JACK SERIAL PORT ANALOG RGB RL MOUS
Resumen del contenido incluido en la página 17
CONNECTING THE PROJECTOR CONNECTING AN IBM-COMPATIBLE LAPTOP COMPUTER (DIGITAL INPUT CONNECTION) NOTE: This connection need optionally sold Graphic Accelerator PC card. For this information, contact to your authorized dealer. Before using with digital connection, install (Plug in) Graphic Accelerator PC card into card bus slot of the computer and set up the computer following instructions in the Graphic Accelerator PC card package. COMPUTER GRAPHIC ACCELERATOR PC CARD INSTALL (PLUG) INTO PC CARD
Resumen del contenido incluido en la página 18
CONNECTING THE PROJECTOR CONNECTING A MACINTOSH DESKTOP COMPUTER COMPUTER MONITOR CABLE BNC CABLE x 5 (NOT PROVIDED) (NOT PROVIDED) COMPUTER OUTPUT (BNC TYPE x 5) VGA/MAC ADAPTER (PROVIDED) COMPUTER OUTPUT VGA CABLE R COMPUTER (PROVIDED) AUDIO OUTPUT L ADB PORT ADB PORT INPUT INPUT AUDIO CABLE COMPUTER (NOT PROVIDED) INPUT 1 (ANALOG) R L COMPUTER AUDIO OUTPUT1 or 2 USB 1 CONTROL PORT 1 AUDIO 1 ANALOG DIGITAL R L (MONO) USB 2 CONTROL PORT 2 AUDIO 2 RG B H V RL (MONO) COMPUTER MOUS
Resumen del contenido incluido en la página 19
CONNECTING THE PROJECTOR CONNECTING A MACINTOSH POWERBOOK COMPUTER COMPUTER NOTE: The Macintosh PowerBook requires the use of the PowerBook Video Adapter shipped with the PowerBook. VGA/MAC ADAPTER (PROVIDED) COMPUTER OUTPUT VGA CABLE (PROVIDED) R COMPUTER ADB PORT ADB PORT AUDIO OUTPUT L INPUT INPUT COMPUTER INPUT 1 AUDIO CABLE R L (ANALOG) (NOT PROVIDED) COMPUTER USB 1 CONTROL PORT 1 AUDIO 1 ANALOG DIGITAL AUDIO INPUT 1 R L (MONO) USB 2 CONTROL PORT 2 AUDIO 2 RG B H V (MONO)
Resumen del contenido incluido en la página 20
CONNECTING THE PROJECTOR CONNECTING THE VIDEO EQUIPMENT CONNECTING TO THE VIDEO INPUT JACKS (1 and 2) BNC TYPE x 3 Connect to the video outputs of a VCR, video disc player, DVD player, video camera, satellite TV tuner or other AV equipment. Connect video output from AV equipment to these jacks using the BNC cables. The video input can be connected 3 types of signals; “COMPOSITE VIDEO", "Y/C SEPARATE VIDEO" and COMPONENT VIDEO {Y, Cb (B-Y), Cr (R-Y)}. Set VIDEO SOURCE of each video input (VIDEO
