Resumen del contenido incluido en la página 1
X6 X7
Reference Guide
Resumen del contenido incluido en la página 2
Table of Contents Table of Contents ......................................................................................... Usage Notice ................................................................................................ 2 Precautions...........................................................................................................2 Important Operating Considerations for Safety ....................................................4 Introduction............................
Resumen del contenido incluido en la página 3
Usage Notice Precautions Follow all warnings, precautions and maintenance as recom- mended in this user’s guide to maximize the life of your unit. Warning- Do not look into the projector’slens when the lamp is on. The brightlight may hurt your eyes. Warning- To reduce the risk of fire or electric shock, do not expose this product torain or moisture. Warning- Please do notopen or disassemble the product asthis maycause electric shock. Warning- When changi
Resumen del contenido incluido en la página 4
Usage Notice Do: Turnoff the product before cleaning. Use a soft cloth moistenedwith mild detergent to clean the display housing. Disconnect the power plugfrom AC outlet if theproduct is not being used for a longperiod of time. Don’t: Block the slotsand openings on the unitprovided for ventila - tion. Use abrasive cleaners, waxes or solvents to clean the unit. Use under the following conditions: - In extremely h
Resumen del contenido incluido en la página 5
2’ / 0.6 m 8’ /2.4 m Usage Notice Important Operating Considerations for Safety Place the projector in a horizontal position no greater than 15 degrees off axis. Locate the projector in a well-ventilatedarea without any obstructions to intake or exhaust vents. Do not place the projector on atablecloth or othersoft coveringthat may block the vents. Locate the projector atleast 4' (1.2 m) away from any heating
Resumen del contenido incluido en la página 6
Introduction Product Features ® This product is a SVGA/XGA single chip 0.55” DLP projec- tor. Outstanding features include: True SVGA, 800 x 600 addressable pixels True XGA, 1024 x 768 addressable pixels TM ® Single chip Dark Chip2 DLP technology NTSC/NTSC4.43/PAL/PAL-M/PAL-N/SECAM and SDTV(480i/576i), EDTV(480p/576p), HDTV(720p/1080i) compatible Multi-Auto functions: Auto detection, Auto image and Auto saving theadjustments Full function remot
Resumen del contenido incluido en la página 7
Introduction Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immedi- ately if anything is missing. Dueto the Projector with lens cap WirelessRemote differencein Controller applications for each country, some regions may have different accessories. PowerCord VGACable Document Pack English ...
Resumen del contenido incluido en la página 8
Introduction Product Overview Main Unit 1 2 3 4 5 6 7 1. Power 2. Remote Controller 3. IR Receiver 4. Zoomand Focus Lever 5. Speaker 6. Lens 7. Lens Cap 7 ... English
Resumen del contenido incluido en la página 9
Introduction Connection Ports 1 2 3 4 5 6 7 8 1. Computer Input Connector 2. Video 1: S-Video Input Connector 3. Video2: CompositeVideo Input Connector 4. SerialControl Connector 5. Monitor OutputConnector 6. Audio Input Connector 7. Power Socket TM 8. Kensington Lock Port English ... 8
Resumen del contenido incluido en la página 10
Introduction Wireless Remote Control To removeremote con - troller from the projector, youmay simply press Please DO NOT removethe remotecon - down the top-center of trollerby other means the remote controller, than the methodstated. thenthe remote control - Any improper action ler willbounce upto be to remove theremote removed. controller maycause damage to the slot. 1 9 2 10 3 11 4 12 5 13 6 14 15 7 16 5 8 17 17 # Icon Function Descrip
Resumen del contenido incluido en la página 11
Introduction 5 Keystone Adjust theimage to compensate Correction for distortion caused by tilt - ing the projector (vertical ±15 degrees). 6 Source Press “source” to choose RGB, Component, S-Video, Composite and HDTV sources. 7 Menu Press“menu” to launch theOn - screen display (OSD) menu, back to the top levelof OSD menu for the OSD mainmenu operation 8 AV-Mute Momentarilyturn off/on the audio and video. 9 Reset Change the adjustments andset - tingsto the
Resumen del contenido incluido en la página 12
Operation Connecting the Projector VGA, DVI 8 Video Output DVD player, Set-top Box HDTV receiver 3 7 5 2 6 4 RS232 1 Dueto the difference in S-Video Output applicationsfor each country, some regions mayhave different accessories. 1................................................................................................................ Powercord 2.............................................................................D-15 to RCAadapter for YPbPr 3.
Resumen del contenido incluido en la página 13
Operation Powering On/Off the Projector Powering On the Projector 1. Remove thelens cap. 2. Ensure that the power cordand signal cable are securely connected. The Power LED will turn flash blue. 3. Turn on the lamp by pressing “Power/Standby”on the control panel. Thestartup screen will display forabout 25 seconds and thePower LED willturn blue. 4. Turn on your source (computer, notebook, video player,etc.) The projector will detectyour sourcea
Resumen del contenido incluido en la página 14
Operation Powering Off the Projector 1. Press the “Power/Standby” to turn off the projector lamp, you will see a messageas below on the on-screen display. 2. Press the “Power/Standby” again to confirm. 3. The cooling fancontinues to operate for abo ut 120 seconds for cooling cycle and the Power LED will flash blue. When the light starts flashing, the projector has entered standby mode. If you wish to turn the projector back on, you must wait until the projector ha
Resumen del contenido incluido en la página 15
Operation Warning Indicator When the “Power”LED i ndicator turns red, it indicates the projector has overheated. Theprojector will auto matically shut itselfdown. When the“Power” LED in dicator flashes red and the mes- sage below displays onscreen, it indicates the projector will detect the lamp life itself. When you see this message, change thelamp as soon as possible orcontact your local dealer orour servicecenter. When the“Power” LED indi cator fl
Resumen del contenido incluido en la página 16
Operation Adjusting the Projected Image Adjusting the Height of Projector Image The projector is equipped with elevator feet for adjusting the height of image. To raise/lowerthe image: 1. Use to fine-tune the display angle. Tilt adjusting wheel Tilt adjusting wheel 5 ... English
Resumen del contenido incluido en la página 17
Operation Adjusting the Projector Zoom / Focus Youmay turn thezoom lever to zoom inor out.To focus the image, rotate the focus ring until the image is clear. The pro- jector will focus at distances from 3.9 to 39.4 feet (1.2 to 12.0 meters)with mechanical travel. Focus Ring ZoomLever Adjusting Projection Image Size 302.8" (769.2cm) Diagonal 227.1" (576.9cm) 176.7" (448.7cm) 126.2" 274.7" (320.5cm) (697.7cm) 206.0" 75.7" (523.3cm) (192.3cm) 160.2" 30.3" (407.0cm) 114.4" (7
Resumen del contenido incluido en la página 18
User Controls On Screen Display Menus The Projector has multilingual On Screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. To open the OSD menu, press “Menu” on the Remote Control. 2. When OSD is displayed, use keys to select anyitem in the main menu. While making a selection on a particular page, press keyto enter sub menu. 3. Use keys to sele
Resumen del contenido incluido en la página 19
User Controls Image (PC Mode) DisplayMode There are many factory presets optimized for various types ofim - ages. PC: For computer or notebook. Movie: For home theater. sRGB: For standard color. Game: For game. User: Memorizeuser’s settings. Brightness Adjust thebrightness of theimage. Pressthe todarken image. Press the to lightenthe image. Contrast The contrast controlsthe degree of dif
Resumen del contenido incluido en la página 20
User Controls Frequence “Frequence” changes the displaydata frequency to match the fre - quency of your computer’s graphic card. If you experience a vertical flickering bar, use this function to make an adjustment. Tracking Synchronize the signal timing of the projector with the graphics card. If you experience an unstable or flickering image, use this function to correct it. White Peaking Use the white peaking control to setthe white peaking level of DMD chip.
