Resumen del contenido incluido en la página 1
Multimedia Projector
PLC-SU07N
MODEL
Owner's Manual
Resumen del contenido incluido en la página 2
INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio comm
Resumen del contenido incluido en la página 3
IMPORTANT SAFETY INSTRUCTIONS All the safety and operating instructions should be read before d. If the projector does not operate normally by following the the product is operated. operating instructions. Adjust only those controls that are covered by the operating instructions as improper Read all of the instructions given here and retain them for adjustment of other controls may result in damage and will later use. Unplug this projector from AC power supply before often require extensive wo
Resumen del contenido incluido en la página 4
TABLE OF CONTENTS FEATURES AND DESIGN 5 COMPUTER MODE 24 SELECTING COMPUTER MODE 24 SELECTING COMPUTER SYSTEM 24 PC ADJUSTMENT 25 PREPARATION 6 COMPATIBLE COMPUTER SPECIFICATIONS 26 PICTURE IMAGE ADJUSTMENT 27 NAME OF EACH PART OF THE PROJECTOR 6 PICTURE POSITION ADJUSTMENT 29 SETTING-UP THE PROJECTOR 7 PICTURE SCREEN ADJUSTMENT 29 POSITIONING THE PROJECTOR 7 ADJUSTABLE FEET 7 CONNECTING THE AC POWER CORD 8 VENTILATION 8 MOVING THE PROJECTOR 9 VIDEO MODE 30 SELECTING VIDEO MODE 30 SELECTING COLO
Resumen del contenido incluido en la página 5
FEATURES AND DESIGN This Multimedia Projector is designed with most u Automatic Multiscanning System advance technology for portability, durability, and This projector can detect output signals from most ease for use. The projector utilizes built-in personal computers currently distributed. It is free multimedia features, a palette of 16.77 million colors, from complicated adjustments to project picture and matrix liquid crystal display (LCD) technology. images from PC. u Compatibility u Multi
Resumen del contenido incluido en la página 6
Resumen del contenido incluido en la página 7
PREPARATION SETTING-UP THE PROJECTOR POSITIONING THE PROJECTOR l This projector is basically designed to project on a flat projection surface. l The projector can be focused from 3.6'(1.1m) ~ 37.7'(11.5m). l Refer to the figure below to adjust the screen size. 37.7’ (11.5m) 24.9' (7.6m) 300” (Maximum zoom) 18.7' (5.7m) 200" 12.5' (3.8m) 187” 150" H1 3.6' (1.1m) (Minimum zoom) 100" 125" 93" 29" 62" H2 18" 20” 60” 100” 150” 200” 300” Screen Size (W x H) mm 406 x 305 1219 x 914 2032 x 1524 3048 x 2
Resumen del contenido incluido en la página 8
PREPARATION CONNECTING THE AC POWER CORD This projector uses nominal input voltages of 100-120 V AC. The projector automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system. Consult your authorized dealer or service station if your are not sure of the type of power supply being in use. Connect the projector with the periphera
Resumen del contenido incluido en la página 9
Resumen del contenido incluido en la página 10
CONNECTING THE PROJECTOR TERMINALS OF THE PROJECTOR COMPUTER INPUT TERMINAL MONITOR OUTPUT TERMINAL Connect the computer output Connect to the monitor to this to this terminal. terminal. (Refer to P12 ~15.) (Refer to P12 ~15.) SERIAL PORT CONNECTOR CONTROL PORT CONNECTOR This connector is used to connect a computer to control When controlling the computer MONITOR OUT COMPUTER IN this projector with the PC. with the Remote Control of this (Refer to P12 ~13.) projector, connect the mouse port to
Resumen del contenido incluido en la página 11
CONNECTING THE PROJECTOR CONNECTING TO THE VIDEO EQUIPMENT Satellite Video Cassette Recorder Video Disc Player TV Turner Video / Audio Output S-VIDEO Output Use Cables and Adapter indicated below. Use the either of VIDEO jack · VIDEO CABLE (not supplied) or S-VIDEO jack. When the · S-VIDEO CABLE (not supplied) both jacks are connected, the · AUDIO CABLE (not supplied) S-VIDEO jack has priority over the VIDEO jack. Video Audio Cable S-VIDEO Cable (Not supplied) (Not supplied) Terminals of the P
Resumen del contenido incluido en la página 12
CONNECTING THE PROJECTOR CONNECTING TO THE IBM-COMPATIBLE COMPUTER To connect with the IBM-compatible computer, refer to the figure below. Use Cables and Adapter indicated below. · VGA CABLE (supplied) · CONTROL CABLE FOR PS/2 PORT or SERIAL PORT (supplied) · MONITOR CABLE (not supplied) · AUDIO CABLE (stereo /not supplied) · SERIAL CABLE (not supplied) u Be sure to connect the CONTROL CABLE corresponding with the terminal of your computer. NOTE : When connecting the cable, the power cords of b
Resumen del contenido incluido en la página 13
CONNECTING THE PROJECTOR MONITOR OUT COMPUTER IN CONTROL PORT SERIAL AUDIO IN AUDIO OUT S-VIDEO R-AUDIO-L VIDEO (MONO) MONITOR OUT AUDIO IN AUDIO OUT CONTROL PORT A SERIAL B COMPUTER IN To disconnect MOUSE CABLE, 1. Hold the portion (B) of the connector with one hand. 2. Pull the portion (A) to the arrow direction and remove connector. Use either of these Mouse Cables corresponding with your terminal of your computer. 13
Resumen del contenido incluido en la página 14
CONNECTING THE PROJECTOR CONNECTION TO THE MACINTOSH COMPUTER To connect with the Macintosh computer, refer to the figure below. Use Cables and Adapter indicated below. · VGA CABLE (supplied) · VGA/MAC ADAPTER (supplied) · CONTROL CABLE FOR ADB PORT (supplied) · MONITOR CABLE (not supplied) · PC AUDIO CABLE (stereo / not supplied) NOTE : When connecting the cable, the power cords of both the projector and the external equipment should be disconnected from AC outlet. Turn the projector and perip
Resumen del contenido incluido en la página 15
CONNECTING THE PROJECTOR u MAC/VGA ADAPTER Set the switches as shown in the table below depending on the RESOLUTION MODE that you want to use before your turn on the projector and computer. ON 12 3 4 5 6 ON DIP 2 4 6 1 3 5 13" MODE (640 x 480) ON ON OFF OFF OFF OFF 16" MODE (832 x 624) OFF ON OFF ON OFF OFF OFF 19" MODE (1024 x 768) OFF ON ON OFF OFF OFF MONITOR OUT COMPUTER IN CONTROL PORT SERIAL AUDIO IN AUDIO OUT S-VIDEO R-AUDIO-L VIDEO (MONO) MONITOR OUT CONTROL PORT AUDIO IN AUDIO OUT A B C
Resumen del contenido incluido en la página 16
ON-OFF FOCUS NO SHOW NORMAL MODE MENU BEFORE OPERATION OPERATION OF THE REMOTE CONTROL This remote control unit is not only able to operate the projector but also usable as a wireless mouse for a PC. POINT button and two CLICK buttons are used for wireless mouse operation. (Refer to page 33.) Wireless mouse is usable when PC mouse pointer is displayed on the screen, the wireless mouse cannot be used when the On-Screen Menu is displayed. ZOOM BUTTONS POWER ON-OFF BUTTON Used to adjust zoom. (P22)
Resumen del contenido incluido en la página 17
BEFORE OPERATION Remote Control Batteries Installation Remove the battery Slide the batteries into Replace the compartment 1 2 3 compartment lid. the compartment. lid. Press the lid downward and slide it. Slide the lid upward. For correct polarity (+ and –), be sure the battery terminals are in contact with the pins in the compartment. To insure safe operation, please observe the following precautions : l Use (2) AA type alkaline batteries. l Replace two batteries at the same time. l Do not use
Resumen del contenido incluido en la página 18
BEFORE OPERATION TOP CONTROLS AND INDICATORS TEMPERATURE WARNING INDICATOR READY INDICATOR This indicator flashes red This indicator is lit in green LAMP INDICATOR when internal projector when the projector is ready to LAMP REPLACE INDICATOR This indicator is lit in dim when temperature is too high. be turned on. the projector is turned on. And This indicator turns to yellow (Refer to P34.) the light is brightened when the when the life of the projection projector is in stand-by mode. lamp draw
Resumen del contenido incluido en la página 19
BEFORE OPERATION OPERATING ON-SCREEN MENU HOW TO OPERATE ON-SCREEN MENU You can control and adjust this projector through ON-SCREEN WIRELESS REMOTE CONTROL MENU. Refer to the following pages to operate the each adjustment on the ON-SCREEN MENU. POINT BUTTON Used to move the Pointer to UP/ DOWN/ 1 MOVING THE POINTER RIGHT/ LEFT. Move the pointer (see the NOTE below) by pressing POINT button(S) on the Top Control or on the Remote Control Unit. 2 SELECT THE ITEM SELECT BUTTON Used to select the
Resumen del contenido incluido en la página 20
BEFORE OPERATION MENU BAR MENU BAR IN COMPUTER MODE Press MENU BUTTON while being in Computer mode. MODE MENU AUTO IMAGE MENU PC ADJUST MENU SETTING MENU LANGUAGE MENU Used to set the Display Used to select Used to adjust Fine Used to adjust the Used to select Menu and to reset sync., Total dots, parameters to the language the Computer Lamp Replacement and Picture Position match with the input used in the Menu. input mode. Monitor Timer. automatically. signal format. (Refer to P32) (Refer to P2
