Resumen del contenido incluido en la página 1
OWNER’S OPERATING MANUAL
TM
TM
PIXEL FOR PIXEL
PFP-7/PFP-11
Resumen del contenido incluido en la página 2
OWNER’S OPERATING MANUAL TM TM PIXEL FOR PIXEL PFP-7/PFP-11
Resumen del contenido incluido en la página 3
The software installed in the PFP-7/PFP-11 is protected by copyright laws and International copyright treaties, as well as other intellectual property laws and treaties. IMPORTANT - READ CAREFULLY: This Runco License Agreement is a legal agreement between you (either an individual or a single entity) and Runco International for the Runco software product installed within the PFP-7/PFP-11. By using the PFP-7/PFP-11, you agree to be bound by the terms of this License Agreement. If you do not agr
Resumen del contenido incluido en la página 4
CONTENTS Warnings and Safety Precautions. . . . . . . . . . . 4 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 General Description . . . . . . . . . . . . . . . . . . . . . 6 Features and Benefits . . . . . . . . . . . . . . . . . . . 6 Front and Rear Panel Description. . . . . . . . . . . 7 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Remote Control Description . . . . . . . . . . .
Resumen del contenido incluido en la página 5
Warnings and Safety Precautions CAUTION: To turn off main power, be sure to remove the plug from power outlet. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible. REMARQUE: Pour mettre l’appareil hors circut, s’assurer de retirer la fiche de la prise d’alimentation. La prise d’ali- mentation doit être installé aussi proche que possible de l’appareil et doit être facile d’ accès. WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE
Resumen del contenido incluido en la página 6
: WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pur- suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the installation manual, may cause harmful interference to radio communications. Ope
Resumen del contenido incluido en la página 7
INTRODUCTION General Description Congratulations on your purchase of the PFP-7/PFP-11 video processor with Vivix™ technology! This processor is designed to maximize the image quality of your fixed-pixel display or rear-screen television while adding an extra level of flexibility to your system. The PFP-7/PFP-11's Vivix™ processing techniques enable this processor to be used with virtually any fixed-pixel display from Plasmas, LCD projectors, DLP projectors and even D-ILA projectors, and will pr
Resumen del contenido incluido en la página 8
< r u e t n u t FRONT AND REAR PANEL DESCRIPTIONS Front Panel 1 2 ratio < > ratio TM PIXEL FOR PIXEL 3 4 5 6 7 8 9 1. IR RECEIVER Receives the IR commands from the remote control. 2. POWER BUTTON Toggles the power on and off. For a discreet on or off command, you can use the direct access buttons on the remote control. NOTE: When the main AC power switch is first turned ON, the processor will go through an initiation cycle for approximately 15 se
Resumen del contenido incluido en la página 9
Rear Panel 1 5 RUNCO INTERNATIONAL HAYWARD, CA 12V FUSE AC 120V 60Hz, 15W RGB VIDEO OUTPUT VIDEO INPUTS RS-232 IN V H BG R PASS THROUGH Y Pr Pb S-VIDEO COMPOSITE MASK SCREEN MADE IN USA 12V TRIGGER 2 3 4 6 7 8 9 10 11 12 13 1. 12v Fuse This fuse protects the 12v outputs from the MASK and SCREEN jacks. (Screen Fuse: 5mm x 25mm, AGC, 0.5A 250V Fast Acting, 250V, Fast Blow) 2. Mask This is a 12V output that is used to trigger masking on screens that have that capability. (For use on motorized scre
Resumen del contenido incluido en la página 10
10. Composite Video Input This is the input for Composite video from sources such as Laser disc players, VCRs and other miscellaneous video sources. 11. Power Input Plug in main power here. 12. 115 VAC Fuse This is the main AC input fuse.(Main Fuse: 5mm x 20 mm, 500mA, 250v, Slow Blow) 13. Main Power Switch Disconnects or applies main power to the processor. 9
Resumen del contenido incluido en la página 11
T I U N P P REMOTE CONTROL DESCRIPTION A. IR OUTPUT INDICATOR Illuminates when a button is pressed, indicating that an IR signal is being transmitted. A B B. POWER BUTTON Toggles the power on and off. For a discreet on or off command, you can use the direct access buttons (see 'J'). Note: When the main AC power PWR switch is first turned ON, the processor will go through an initiation cycle C for approximately 15 seconds. The processor cannot be turned on or G operated until the initialization i
Resumen del contenido incluido en la página 12
QUICK SET-UP GUIDE Connection Examples RUNCO INTERNATIONAL HAYWARD, CA 12V FUSE AC 120V 60Hz, 15W RGB VIDEO OUTPUT VIDEO INPUTS RS-232 IN V H B G R PASS THROUGH Y Pr Pb S-VIDEO COMPOSITE MASK SCREEN MADE IN USA 12V TRIGGER Reserved for future use DVD Player VCR, Laser disc player, Automation RUNCO camcorders System Computer or Sattelite Display Device DTV decoder receiver or SVHS player While there are many different ways to connect your source equipment to your PFP-7/PFP-11, the examples show
Resumen del contenido incluido en la página 13
Getting Started Now that your PFP-7/PFP-11 has been installed, it's time to get it configured for use in your system. Please follow the procedures and recommendations below: 1. First, connect all sources (DVD, VCR, Satellite receiver, etc.) to the PFP-7/PFP-11, if this has not already been done. Also, ensure all sources are ON and functioning, if possible. 2. Connect the RGB (or component) output of the PFP-7/PFP-11 to the display device it is to be used with. NOTE: It may be necessary to set t
Resumen del contenido incluido en la página 14
Overall Functional Description The PFP-7/PFP-11 has many useful purposes. It has many different scan rate outputs that can match most fixed- pixel displays, as well as most HD-capable rear-screen televisions. Also, the sync polarity and output type (RGB, Component, Sync on green, etc.) can be changed to meet the requirements of the display device, ensuring that the PFP-7/PFP-11 will be fully compatible in all respects to just about every type of display. In addition to being compatible with most
Resumen del contenido incluido en la página 15
MENU DESCRIPTION AND NAVIGATION Main Menu MAIN MENU > COMPOSITE S-VIDEO Source selection and COMPONENT picture quality adjustments PASS THROUGH ASPECT RATIO INSTALLATION Aspect ratio selection See "installation" section When the MENU button is pressed on either the remote control or the front panel, the main menu will appear on-screen. An example of the main menu is shown above. The active source is indicated by an arrow to the left of the source; note that in the example above, Composite
Resumen del contenido incluido en la página 16
Picture Quality Adjustments MAIN MENU TINT > COMPOSITE COLOR S-VIDEO BRIGHTNESS COMPONENT CONTRAST PASS THROUGH SHARPNESS LUMA ENHANCE ASPECT RATIO CHROMA ENHANCE INSTALLATION Picture quality adjustments (also known as "Front Panel Controls") are the controls that change different parameters of the image such as the amount of color, black level, etc. While these adjustments can be set to suit the needs of the user, there is a way to set these properly. This section will describe what each funct
Resumen del contenido incluido en la página 17
TINT (also known as 'hue') is essentially the ratio of red to green in the color portion of the image. If TINT is decreased, the image will appear redder, and increasing it will cause the image to appear greener. To set TINT properly, look at the color bar pattern through a blue filter (or mute the red and green outputs). Adjust TINT until the middle two tall color bars match the middle short color bars (see color bar drawing). COLOR (also known as 'saturation') increases or decreases the amount
Resumen del contenido incluido en la página 18
SHARPNESS adjusts the amount of high-frequency detail in the image. This can be adjusted to the preference of the user. Keep in mind that when SHARPNESS is decreased, fine details in the image will become 'soft'; when it is increased, fine details will become sharper but will also make the picture appear 'noisy' if adjusted too high. LUMA ENHANCE acts as an edge enhancement, especially around black to white transitions in the image. Essentially, this has the same characteristics as sharpness but
Resumen del contenido incluido en la página 19
Screen Type When you are installing the processor for the first time, the first order of business is to define what type of screen will be used with this system. If a 1.78:1 (16:9) or 1.85:1 screen is used, highlight 16:9 SCREEN and press ENTER. If a standard 4:3 screen is installed, highlight 4:3 SCREEN and press enter. However, if your display is a native 16:9 aspect ratio (such as most plasmas), you only need to select the actual resolution of the device. The PFP-7/PFP-11 will automatically s
Resumen del contenido incluido en la página 20
Selecting A Resolution (Scan Rate) To select a scan rate, first determine which type of display will be used with the PFP-7/PFP-11 (see 'Fixed pixel displays' or 'CRT displays' below). If the display is a FIXED PIXEL display, you'll want to use one of the FIXED PIXEL scan rates. If using a CRT projector, you'll want to use one of the CRT scan rates. To select a resolution, follow this procedure: · Press MENU and ensure 'INSTALLATION' is on the bottom of the menu. If it's not, enable the INSTALLA
