Resumen del contenido incluido en la página 1
PR9030
LCD Projector
User's Manual
Network Guide
www.planar.com
Resumen del contenido incluido en la página 2
Important Recycle Instruction Lamp(s) inside this product contain mercury. This product may contain other electronic waste that can be hazardous if not disposed of properly. Recycle or dispose in accordance with local, state, or federal Laws. For more information, contact the Electronic Industries Alliance at http://WWW.EIAE.ORG. For lamp specific disposal information check at http://WWW.LAMPRECYCLE.ORG. Register Your Planar Products Today Thank you for choosing Planar. To assure y
Resumen del contenido incluido en la página 3
Thank you for purchasing this projector. This projector has the network function that brings you the following main features. ü W eb control The projector can be controlled and monitored by a web browser software on your PC, which can help you to setup and maintain the projector. ü MY IMAGE (Still Image Transfer) Display The projector can display still images that are transferred via the network. This manual is only intended to explain Network function only. For safety, operations or any oth
Resumen del contenido incluido en la página 4
Content Content Content ..........................................................................................2 1. Main functions ...........................................................................3 1.1 Configuring and controlling via a web browser ........................................... 3 1.2 MY IMAGE (Still image Transfer) Display ................................................... 3 2. Equipment connection and network setting .............................4 2.1 Required equi
Resumen del contenido incluido en la página 5
1. Main functions 1. Main functions 1.1 Configuring and controlling via a web browser You can adjust or control the projector via a network from a web browser on a PC that is connected to the same network. Logon the network from the web browser and it offers the menus to configure the network settings, monitor the projector and so on. 1.2 MY IMAGE (Still image Transfer) Display Image files can be sent via the network, and up to 4 image data can be stored in the projector and displayed on scre
Resumen del contenido incluido en la página 6
2. Equipment connection and network setting 2. Equipment connection and network setting 2.1 Required equipment preparation The following equipments are required to connect the projector to your PC through the network. PC : 1) equipped with the network feature 2) installed a web browser software ( 11) LAN cable : CAT-5 or greater NOTE • The system for using the network function of the projector requires communication environment conforming 100Base-TX or 10Base-T. 4
Resumen del contenido incluido en la página 7
2. Equipment connection and network setting 2.2 Manual network connection setting 2.2.1 Equipments connection Connect the projector and PC with a LAN cable. * Before connecting with an existing network, contact the network administrator. Next, please check the PC setting as explained below. 2.2.2 Network settings This is the explanation of network connection settings for Windows XP and Internet Explorer. 1) Log on to Windows XP as administrator authority. (*) 2) Open “Control Panel” from “Sta
Resumen del contenido incluido en la página 8
2. Equipment connection and network setting 2.2 Manual network connection setting (continued) 5) Open “Local Area Connection Properties” window you use for network device. (Fig. 2.2.2.c) Fig. 2.2.2.c “Local Area Connection Properties” window 6) Set used protocol as “TCP/IP” and open “Internet Protocol (TCP/IP) Properties” window. Fig. 2.2.2.d “Internet Protocol (TCP/IP) Properties” window 7) Set IP address, subnet mask and default gateway for PC. 6
Resumen del contenido incluido en la página 9
2. Equipment connection and network setting 2.2 Manual network connection setting (continued) [About IP address] ■ Setting manually The Network address portion included in the IP address set into your PC should be common with projector’s one. And the entire IP address in the PC should not be overlapped with other equipments in the same network, including the projector. For example The projector’s initial settings are as follows. IP address: 192.168.1.10 Subnet mask: 255.255.255.0 (Network add
Resumen del contenido incluido en la página 10
2. Equipment connection and network setting 2.2 Manual network connection setting (continued) 2.2.3 “Internet Option” setting 1) Click “Internet Options” in “Network and Internet Connections” window (Fig. 2.2.3.a) to open “Internet Properties” window. (Fig.2.2.3.b) Click Fig. 2.2.3.a “Network and Internet Connections” window Click Fig. 2.2.3.b “Internet Properties” window 2) Click “Connections” tab and then click [LAN Settings] button to open “Local Area Network (LAN) settings”. (Fig. 2.2.3
Resumen del contenido incluido en la página 11
2. Equipment connection and network setting 2.2 Manual network connection setting (continued) Fig. 2.2.3.c “Local Area Network (LAN) Settings” window 3) Uncheck all boxes in “Local Area Network (LAN) Settings” window. (Fig. 2.2.3.c) 2.2.4 Check connection Check PC and projector are connected properly here. If it is not connected, check cable connections and settings are properly or not. 1) Start browser in PC and specify following URL, then click “ ” button. URL: http://(Projector IP address)/
Resumen del contenido incluido en la página 12
3. Management with Web browser software 3. Management with Web browser software This projector is equipped with the following network functions by using a web browser software. Configuring and Controlling the Projector via a Web Browser You can change the settings of or control the projector via a network by using a web browser from a PC that is connected to the same network. (11) E-mail Alerts The projector can automatically send an alert to specified e-mail addresses when the projector req
Resumen del contenido incluido en la página 13
3. Management with Web browser software 3.1 Configuring and controlling the projector via a web browser You can adjust or control the projector via a network from a web browser on a PC that is connected to the same network. NOTE • Internet Explorer 5.5 or later is required. • If JavaScript is disabled in your web browser configuration, you must enable JavaScript in order to use the projector web pages properly. See the Help files for your web browser for details on how to enable JavaScript.
Resumen del contenido incluido en la página 14
3. Management with Web browser software 3.1 Configuring and controlling the projector via a web browser (continued) When configuring or controlling the projector via a web browser, an ID and password are required. There are two types of IDs, Administrator ID and User ID. The following chart describes the differences between Administrator and User IDs. Item Description Administrator User Displays the projector’s current Network Information √ √ network configuration settings. Displays and confi
Resumen del contenido incluido en la página 15
3. Management with Web browser software 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.1 Logon Refer to the following for configuring or controlling the projector via a web browser. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter “http://192.168.1.10/” into the address bar of the web browser and press “Enter” key or click “ ” button. The screen in Fig. 3.1.1a will be displayed. 2) Enter your ID and password and click [Logon].
Resumen del contenido incluido en la página 16
3. Management with Web browser software 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.2 Network Information All screen drawings in this manual are shown when you logon with the Administrator ID. Any functions that are available only for the Administrator will not be shown when you logon with the User ID. Refer to the table. ( 12,13) Displays the projector’s current network configuration settings. Item Description Projector Name Displays the projector name s
Resumen del contenido incluido en la página 17
3. Management with Web browser software 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.3 Network Settings Displays and configures network settings. Item Description IP Configuration Configures network settings. DHCP ON Enables DHCP. DHCP OFF Disables DHCP. IP Address Configures the IP address when DHCP is disabled. Subnet Mask Configures the subnet mask when DHCP is disabled. Default Gateway Configures the default gateway when DHCP is disabled. Configures the nam
Resumen del contenido incluido en la página 18
3. Management with Web browser software 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.4 Port Settings Displays and configures communication port settings. Item Description Network Control Port1 Configures command control port 1 (Port:23). (Port:23) Port open Click [Enable] check box to use port 23. Click [Enable] check box when authentication is required for Authentication this port. Network Control Port2 Configures command control port 2 (Port:9715). (Port:9
Resumen del contenido incluido en la página 19
3. Management with Web browser software 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.5 Mail Settings Displays and configures e-mail addressing settings. Item Description Click [Enable] check box to use the e-mail function. Send mail Configure the conditions for sending e-mail under the Alert Settings. Configures the address of the mail server in IP format. • The address allows not only IP address but also domain SMTP Server IP Address name if the valid DNS s
Resumen del contenido incluido en la página 20
3. Management with Web browser software 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.6 Alert Settings Displays and configures failure & alert settings. Alert Item Description Cover Error The lamp cover has not been properly fixed. Fan Error The cooling fan is not operating. The lamp does not light, and there is a possibility that interior Lamp Error portion has become heated. There is a possibility that the interior portion has become Temp Error heated. Air F
