Resumen del contenido incluido en la página 1
R
LCD Projector Commercial Use
Operating Instructions
Model No. PT-LC75E
PT-LC55E
POWER
INPUT
VIDEO RGB
AUTO
SETUP MENU
ENTER
FREEZE SHUTTER
STD
VOLUME D.ZOOM
INDEX
WINDOW
PROJECTOR
Before operating this product, please read the instructions carefully and save this
manual for future use.
TQBJ 0093-1
ENGLISH
Resumen del contenido incluido en la página 2
IMPORTANT: THE MOULDED PLUG (U.K. only) Dear Panasonic Customer: FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT This instruction booklet provides all the necessary operating information that CAREFULLY. you might require. We hope it will help you to get the most performance out of your new product, and that you will be pleased with your Panasonic LCD This appliance is supplied with a moulded three pin mains plug for your projector. safety and convenience. A 13 amp fuse is fitted in this plug. Sh
Resumen del contenido incluido en la página 3
Contents Precautions with regard to safety SHARPNESS .................................33 Preparation WARNING Colour Hue Setting .........................33 IMPORTANT SAFETY NOTICE..........2 If a problem occurs (such as no image or no sound) or if you notice TV SYSTEM ...................................33 Precautions with regard to safety ....5 WHITE BALANCE R/G/B ...............33 smoke or a strange smell coming from the projector, turn off the power SIGNAL MODE...............................33
Resumen del contenido incluido en la página 4
Do not do anything that might damage the power cord or the power During a thunderstorm, do not touch the projector or the cable. cord plug. BElectric shocks can result. BDo not damage the power cord, make any modifications to it, place it near Do not use the projector in a bath or shower. any hot objects, bend it excessively, twist it, pull it, place heavy objects on BFire or electric shocks can result. top of it or wrap it into a bundle. Do not look into the lens while the projector is being us
Resumen del contenido incluido en la página 5
When inserting the battery, make sure the polarities (+ and -) are Accessories correct. Check that all of the accessories shown below have been included with your BIf the battery is inserted incorrectly, it may explode or leak, and fire, injury projector. or contamination of the battery compartment and surrounding area may result. Use only the specified battery. Card remote control unit Lithium battery for RGB signal cable [3.0 m BIf an incorrect battery is used, it may explode or leak, and fire
Resumen del contenido incluido en la página 6
About the screen Precautions on handling If the screen you are using is dirty, damaged or discoloured, attractive projections cannot be obtained. Do not apply any volatile substances to the Cautions regarding transportation screen, and do not let it become dirty or damaged. Be sure to attach the lens cover before transporting the projector. Before carrying out cleaning and maintenance, be The projection lens is extremely susceptible to vibration and shocks. When carrying the projector, use the a
Resumen del contenido incluido en la página 7
Projector Location and function of each part $ # Projector % + %$ # , & * ' ( & ) & ' #Air outlet port +Security lock Do not cover this port. This can be used to connect a + ( commercially-available theft- WARNING ) * prevention cable (manufactured Do not bring your hands or other by Kensington). This security lock objects close to the air outlet is compatible with the Microsaver port. Security System from #Projector control panel BHeated air comes out of
Resumen del contenido incluido en la página 8
)Input select (INPUT, RGB, 1STD (standard) button VIDEO) buttons (page 29) (page 24) This button is used to reset the # $ % & '( ) projector adjustment values to the *ENTER button factory default settings. (page 28) & This button is used to accept and 2SHUTTER button POWER INPUT ) to activate items selected in the (page 38) ( VIDEO RGB POWER AUTO SETUP INPUT , + on-screen menus. This button is used to TEMP AUTO RGB INPUT LAMP MENU SETUP * mome
Resumen del contenido incluido en la página 9
About the RGB INPUT indicator The RGB INPUT indicator can be used to check whether an RGB/YPBPR signal is being input. Refer to the table below for details. # $ % & ' ( Power supply status RGB INPUT indicator status Standby On (projecting) A signal is being input to A signal is being input to the connector selected Illuminated either the RGB1 IN or using the input select RGB2 IN connector. buttons. #SERIAL connector 'VIDEO IN jack No signal is being input to (pages 20, 21 and
Resumen del contenido incluido en la página 10
Using the remote control unit Connections Inserting the battery Operating range Notes on connections Insert the lithium battery which is If the remote control unit is held so BRead the instruction manual for each system component carefully before supplied with the remote control that it is facing directly in front of the connecting it. unit, making sure that the polarities front or rear remote control signal BTurn off the power supply for all components before making any are correct. receptors,
Resumen del contenido incluido en la página 11
Example of connecting to video equipment Example of connecting to computer Computer D-sub 15 (male) - BNC5 (female) adapter cable Monitor Computer for (sold separately, ET-ADBNC) control use Red (connect to PR signal connector) Blue (connect to PB signal connector) Green (connect to Y signal connector) Digital broadcast tuner or DVD player Computer for D-sub 9-pin control use (male) D-sub 9-pin (male) DVD player Video deck NOTE: BOnly one audio system circuit is available for the AUDIO IN L-R ja
Resumen del contenido incluido en la página 12
Projection distances Setting-up Projection distance (L) Projection methods 4:3 Screen Height The projector can be set up so that any one of the following four projection PT-LC75E PT-LC55E size position methods are used. Select whichever projection method matches the setting- Wide Telephoto Wide Telephoto (diagonal) (H1) up method. (The projection method can be set from the OPTION2 menu. (LW) (LT) (LW) (LT) Refer to page 37 for details.) 0.84 m(33˝) 1.1 m(3´7˝) 1.1 m(3´7˝) 0.08 m(3-1/8˝) DESK/CE
Resumen del contenido incluido en la página 13
*Press the AUTO SETUP button to Starting to use initiate automatic positioning. POWER INPUT VIDEO RGB If keystone distortion has not been POWER AUTO SETUP INPUT AUTO Turning on the power SETUP MENU corrected to the optimum level, carry ENTER STANDBY(R) Please ensure that all preparations have been completed before turning on ON(G) FREEZE SHUTTER out keystone correction as described STD the power. (Refer to pages 19 – 23.) MENU ENTER VOLUME D.ZOOM INDEX WINDOW on page 31. PROJECTOR #Remove the
Resumen del contenido incluido en la página 14
PICTURE menu (page 32) On-screen menus When an S-VIDEO/VIDEO signal When an RGB/YPBPR signal is is being input being input Menu screens PICTURE PICTURE The various settings and adjustments for this projector can be carried out by PICTURE MODE STANDARD PICTURE MODE STANDARD selecting the operations from on-screen menus. COLOR 32 COLOR 32 The general arrangement of these menus is shown below. TINT 32 TINT 32 BRIGHT 32 BRIGHT 32 CONTRAST
Resumen del contenido incluido en la página 15
&Press the F F or G G buttons to BWhen an individual adjustment Menu operation guide Returning a setting to select an item, and then press screen is being displayed #Press the MENU button. the factory default the I I or H H buttons to change The MAIN MENU screen will be If you press the STD (standard) BRIGHT 32 or adjust the setting. displayed. button on the remote control unit, Only the item displayed will be An individual adjustment screen you can return settings to the returned to the
Resumen del contenido incluido en la página 16
Using the D.ZOOM (digital zoom) Correcting keystone distortion Keystone distortion is corrected automatically when the projector’s automatic setup function is used, but this correction will not apply if the screen itself is function tilted. In such cases, you can correct the keystone distortion manually with This function lets you enlarge a the following procedure. %Use the D.ZOOM +/- buttons to single section of the picture. change the enlargement ratio. #Select “KEYSTONE” from the MAIN MENU sc
Resumen del contenido incluido en la página 17
I button to make the picture Press the H button to make the Adjusting the picture darker. (Adjust the BRIGHT setting selected colour stronger. first if required before adjusting the Use the F and G buttons on the PICTURE MODE SIGNAL MODE CONTRAST setting.) projector or remote control unit to PICTURE MODE STANDARD (RGB/YPBPR only) select an item, and then use the I [ SHARPNESS This displays the type of signal DYNAMIC and H buttons to change the setting
Resumen del contenido incluido en la página 18
AUTO is used to change the aspect ratio of Adjusting the position (S-VIDEO only) the screen picture, you may be When an S1 video signal is input to infringing the rights of the original When the input signal is RGB, first VERTICAL POSITION the S-VIDEO terminal, the aspect copyright owner for that programme press AUTO SETUP button to Press the I button to move the ratio is changed automatically to under copyright protection laws. initiate automatic positioning. picture down, and press the H proje
Resumen del contenido incluido en la página 19
RGB FORMAT LAMP POWER Option settings RGB FORMAT RGB LAMP POWER HIGH [ [ Use the F and G buttons on the AUTO Y·PB·PR Y•PB•PR STANDARD projector or remote control unit to AUTO Y·PB·PR Input This setting is only valid when an This setting changes the lamp select an item, then press the I or signal HDTV signal is being input and brightness. When set to ON OFF H buttons to change the setting. “AUTO Y·PB·P
Resumen del contenido incluido en la página 20
KEYSTONE FUNC 1 Using the INDEX WINDOW function BFunctions in the same way as FUNC1 INDEX This function lets you store a picture which is being projected into memory, when “KEYSTONE” is selected [ so that you can display a still picture and a moving picture on the screen. KEYSTONE from the MAIN MENU screen. (page 31) This assigns a function to the F1 #Press the INDEX WINDOW button. button of the ET-RM100 wireless You can also select INDEX WIND
