Resumen del contenido incluido en la página 1
R
LCD Projector Commercial Use
Operating Instructions
Model No. PT-LB20NTE
PT-LB20E
PT-LB20SE
PT-LB20VE
POWER
INPUT
VIDEO RGB
AUTO
MENU
SETUP
ENTER
FREEZE SHUTTER
STD
VOLUME D.ZOOM
INDEX
WINDOW
PROJECTOR
Before operating this product, please read the instructions carefully and save this
manual for future use.
TQBJ 0168
ENGLISH
Resumen del contenido incluido en la página 2
Dear Panasonic Customer: This instruction booklet provides all the necessary operating information that you might require. We hope it will help you to get the most out of your new product, and that you will be pleased with your Panasonic LCD projector. The serial number of your product may be found on its bottom. You should note it in the space provided below and retain this booklet in case service is required. Model number: PT-LB20NTE / PT-LB20E / PT-LB20SE / PT-LB20VE Serial number: IMPORTANT
Resumen del contenido incluido en la página 3
WARNING: BFor permanently connected equipment, a readily accessible disconnect device shall be incorporated in the building installation wiring; BFor pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible. CAUTION: To assure continued compliance, follow the attached installation instructions, which includes using the provided power cord and shielded interface cables when connecting to computer or peripheral device. If you use serial port to co
Resumen del contenido incluido en la página 4
4-ENGLISH
Resumen del contenido incluido en la página 5
Contents TV-SYSTEM, STILL MODE, Preparation SIGNAL MODE, Projecting sRGB- IMPORTANT SAFETY NOTICE ...2 compatible pictures Precautions with regard to Adjusting the position...............41 safety .........................................6 POSITION, DOT CLOCK, CLOCK PHASE, ASPECT, RESIZING, Accessories ...............................10 FRAME LOCK Before use ..................................11 Changing the display Location and function of each language..................................44 part.
Resumen del contenido incluido en la página 6
Precautions with regard to safety WARNING If you notice smoke, strange smells or noise coming from the projector, disconnect the mains plug from the mains socket. BDo not continue to use the projector in such cases, otherwise fire or electric shocks could result. BCheck that no more smoke is coming out, and then contact an Authorised Service Centre for repairs. BDo not attempt to repair the projector yourself, as this can be dangerous. Do not install this projector in a place which is not strong
Resumen del contenido incluido en la página 7
Do not do anything that might damage the mains lead or the mains plug. BDo not damage the mains lead, make any modifications to it, place it near any hot objects, bend it excessively, twist it, pull it, place heavy objects on top of it or wrap it into a bundle. BIf the mains lead is used while damaged, electric shocks, short-circuits or fire may result. BAsk an Authorised Service Centre to carry out any repairs to the mains lead that might be necessary. Do not handle the mains plug with wet hand
Resumen del contenido incluido en la página 8
During a thunderstorm, do not touch the projector or the cable. BElectric shocks can result. Do not use the projector in a bath or shower. BFire or electric shocks can result. Do not look into the lens while the projector is being used. BStrong light is emitted from the projector’s lens. If you look directly into this light, it can hurt and damage your eyes. BBe especially careful not to let young children look into the lens. In addition, disconnect the mains plug when you are away from the proj
Resumen del contenido incluido en la página 9
Always disconnect all cables before moving the projector. BMoving the projector with cables still attached can damage the cables, which could cause fire or electric shocks to occur. Do not place any heavy objects on top of the projector. BFailure to observe this may cause the projector to become unbalanced and fall, which could result in damage or injury. Do not short-circuit, heat or disassemble the batteries or place them into water or fire. BFailure to observe this may cause the batteries to
Resumen del contenido incluido en la página 10
Accessories Check that all of the accessories shown below have been included with your projector. Card remote control unit Lithium battery for RGB signal cable (N2QADC000008 x1) remote control unit [1.8 m (5´10˝), (CR2025 x1) K1HA15DA0002 x1] POWER INPUT VIDEO RGB AUTO MENU SETUP ENTER Mains lead Carrying bag FREEZE SHUTTER (K2CM3DR00002 x 1) (TPEP013-1 x 1) STD VOLUME D.ZOOM INDEX WINDOW PROJECTOR CD-ROM* (TQBH9007 x1) *PT-LB20NTE only 10-ENGLISH
Resumen del contenido incluido en la página 11
Before use Caution when moving the projector Be sure to attach the lens cover before moving the projector. The projection lens is extremely susceptible to vibration and shocks. When moving the projector, use the accessory carrying bag. When placing the projector inside the carrying bag, position it so that the lens is facing upward. Do not put anything else in the bag other than the projector and the cables. Cautions regarding setting-up Avoid setting up in places which are subject to vibration
Resumen del contenido incluido en la página 12
Notes on use In order to get the best picture quality Draw curtains or blinds over any windows and turn off any lights near the screen to prevent outside light or light from indoor lamps from shining onto the screen. Do not touch the surfaces of the lens with your bare hands. If the surface of the lens becomes dirty from fingerprints or anything else, this will be magnified and projected onto the screen. Moreover, when not using the projector, retract the lens and then cover it with the lens cov
Resumen del contenido incluido en la página 13
Location and function of each part Projector #$% & ' * ) ' ( #Projector control panel (page 16) $Zoom ring (page 25) %Focus ring (page 25) &Security lock This can be used to connect a commercially-available theft-prevention cable (manufactured by Kensington). This security lock is compatible with the Microsaver Security System from Kensington. 'Leg adjuster buttons (L/R) (page 25) These buttons are used to unlock the front adjustable legs. Press to adjust the angle of til
Resumen del contenido incluido en la página 14
Projector $%$ # ( ' & #Connector panel (page 15) $Air outlet port Do not cover this port. %Speaker &Front adjustable legs (L/R) (page 25) 'Air inlet port, Air filter (page 54) Do not cover this port. (Lamp unit cover (page 55) NOTE: BDuring projection of an image, the cooling fan will operate, emitting a small noise as it operates. This noise may change depending on the ambient temperature. Turning the lamp on or off will cause this noise to increase a little. BBy using the “OP
Resumen del contenido incluido en la página 15
Connector panel $%& ' ) * # ( #Power input socket (AC IN) (page 24) The accessory mains lead is connected here. Do not use any mains lead other than the accessory mains lead. $SERIAL connector (pages 21, 22 and 64) This connector is used to connect a personal computer to the projector in order to control the projector externally. (RS-232C compatible) %RGB1 IN connector (pages 21 and 22) This connector is used to input RGB signals and YPBPR signals. &RGB2 IN/1 OUT connector (pages 21, 22 and 46)
Resumen del contenido incluido en la página 16
Projector control panel Menu operation #$% & ' ( * ) +, Remote control unit ' POWER INPUT ( ) VIDEO RGB * + AUTO MENU SETUP , - ENTER . / FREEZE SHUTTER 0 STD VOLUME D.ZOOM INDEX WINDOW 1 2 PROJECTOR #RGB INPUT indicator This indicator illuminates when a signal is being input to the connector (RGB1 IN or RGB2 IN) selected using the input select buttons. It also illuminates while the direct power off function is operating. $LAMP indicator (page 53) This indicator illu
Resumen del contenido incluido en la página 17
%TEMP indicator (page 52) This indicator illuminates if an abnormally high temperature is detected inside the projector or around it. If the temperature rises above a certain level, the power supply will be turned off automatically and the indicator will flash. &Illumination sensor (page 39) This sensor detects the luminance when the “DAYLIGHTVIEW” function is operating. Do not cover the projector and do not place any object on the projector when using it. 'POWER button (pages 24, 26 and 27) Thi
Resumen del contenido incluido en la página 18
Setting-up Projection methods In way of installing projector, any one of the following four projection methods are used. Select whichever projection method matches the setting-up method. (The projection method can be set from the “OPTION” menu. Refer to pages 46 and 47 for details.) BFront-desk projection BFront-ceiling projection Menu items Setting Menu items Setting FRONT/REAR FRONT FRONT/REAR FRONT DESK/CEILING DESK DESK/CEILING CEILING BRear-desk projection BRear-ceiling projection (Using a
Resumen del contenido incluido en la página 19
Projector position Top edge of screen L: Projection distance Screen SH: Image height L SW:Image width H1: Distance from centre Bottom edge of screen of lens to bottom edge of projected image L Screen Projection distances PT-LB20NTE/PT-LB20E 4:3 Screen size Projection distance (L) Height position (diagonal) (H1) Wide (LW) Telephoto (LT) 0.84 m(33˝) — 1.1 m(3´7˝) 0.08 m(3-1/8˝) 1.02 m(40˝) 1.2 m(3´11˝) 1.4 m(4´7˝) 0.09 m(3-17/32˝) 1.27 m(50˝) 1.5 m(4´11˝) 1.7 m(5´6˝) 0.11 m(4-5/16˝) 1.52 m(60˝) 1.
Resumen del contenido incluido en la página 20
PT-LB20SE Projection distance (L) 4:3 Screen size Height position (diagonal) (H1) Wide (LW) Telephoto (LT) 0.84 m(33˝) — 1.1 m(3´7˝) 0.08 m(3-1/8˝) 1.02 m(40˝) 1.2 m(3´11˝) 1.4 m(4´7˝) 0.09 m(3-17/32˝) 1.27 m(50˝) 1.5 m(4´11˝) 1.8 m(5´10˝) 0.11 m(4-5/16˝) 1.52 m(60˝) 1.8 m(5´10˝) 2.1 m(6´10˝) 0.14 m(5-1/2˝) 1.78 m(70˝) 2.1 m(6´10˝) 2.5 m(8´2˝) 0.16 m(6-9/32˝) 2.03 m(80˝) 2.4 m(7´10˝) 2.9 m(9´6˝) 0.18 m(7-1/16˝) 2.29 m(90˝) 2.8 m(9´2˝) 3.2 m(10´5˝) 0.20 m(7-27/32˝) 2.54 m(100˝) 3.0 m(9´10˝) 3.6 m
