Resumen del contenido incluido en la página 1
Table of Contents
SETUP | Signal (RGB) ....................... 39
Table of Contents ............................1
SETUP | Signal (Video) ..................... 40
Usage Notice ...................................2
SETUP | Advanced ............................ 41
Safety Information ...............................2
SETUP | Network ............................... 42
Precautions .........................................3
OPTION .............................................45
Eye Safety Warnings ......
Resumen del contenido incluido en la página 2
Usage Notice Safety Information The lightning flash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the
Resumen del contenido incluido en la página 3
Usage Notice Precautions Please follow all warnings, precautions and maintenance as recommended in this user’s guide. ▀■ Warning- Do not look into the projector’s lens when the lamp is on. The bright light may hurt and damage your eyes. ▀■ Warning- To reduce the risk of fire or electric shock, do not expose this projector to rain or moisture. ▀■ Warning- Please do not open or disassemble the projector as this may cause electric shock. ▀■ Warning- When replacing the lamp, please allow the
Resumen del contenido incluido en la página 4
Usage Notice Do: Turn off and unplug the power plug from the AC outlet before cleaning the product. Use a soft dry cloth with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Do not: Block the slots and openings on the unit provided for ventilation. Use abrasive cleaners, waxes or solvents to clean the unit. Use under the following conditions: - In extremely hot, c
Resumen del contenido incluido en la página 5
Usage Notice Eye Safety Warnings ▀■ Avoid staring/facing directly into the projector beam at all times. Keep your back to the beam as much as possible. ▀■ When projector is used in a classroom, adequately supervise students when they are asked to point out something on the screen. ▀■ In order to minimize the lamp power, use room blinds to reduce ambient light levels. Product Features ▀■ WUXGA (1920 x 1200) Native resolution ▀■ HD compatible – 1080p supported ▀■ Extensive optional lens ▀■
Resumen del contenido incluido en la página 6
Introduction Package Overview Unpack and inspect the box contents to ensure all parts listed below are in the box. If something is missing, please contact your nearest customer service center. Projector Power Cord 3.0m VGA Cable 1.8m Due to different RS232 Cable 1.8m DVI/HDMI Cable 30cm IR Remote Control applications in each country, some regions may have Documentation : different accessories. User’s Manual Warranty Card Quick Start Card 2 × AA Batteries WEEE Card (fo
Resumen del contenido incluido en la página 7
INFO. Introduction Product Overview Main Unit 1 2 3 4 5 6 1 7 3 8 LENS SOURCE RE-SYNC SHIFT 9 MENU ENTER FOCUS AV MUTE ZOOM S-VIDEO VIDEO Y Pb Pr 10 R G B H V RJ45 12V OUT RS232 HDMI 2 HDMI 1 VGA-OUT VGA 2-IN VGA 1-IN 11 12 1. Ventilation (inlet) 9. Control Panel 2. Lens Door 10. Input / Output 3. IR Receivers Connections 4. Lamp Door 11. Power Socket 5. Ventilation (outlet) 12. Power Switch 6. Indicator LED 7. Projector Cap 8. Tilt-Adjustment Feet 7 English POWER LAMP-1 LAMP-2 TEMP
Resumen del contenido incluido en la página 8
INFO. Introduction Control Panel 1 2 3 4 LENS SOURCE RE-SYNC SHIFT MENU ENTER FOCUS AV MUTE ZOOM S-VIDEO VIDEO Y Pb Pr R G B H V 5 6 7 8 9 10 11 RJ45 1. Power button 2. SOURCE RS232 12V OUT HDMI 2 HDMI 1 3. RE-SYNC VGA-OUT VGA 2-IN VGA 1-IN 4. LENS SHIFT 5. Information 6. AV MUTE 7. MENU 8. Four Directional Select Keys 9. ENTER 10. ZOOM 11. FOCUS 8 English
Resumen del contenido incluido en la página 9
INFO. Introduction Input/Output Connections LENS SOURCE RE-SYNC SHIFT MENU ENTER FOCUS 1 2 3 4 AV MUTE ZOOM 12V OUT S-VIDEO VIDEO Y Pb Pr 6 R G B H V RJ45 RS232 12V OUT HDMI 2 HDMI 1 VGA 2-IN VGA 1-IN VGA-OUT 5 7 8 9 10 11 12 13 14 15 1. S-Video Input Connector 2. Composite Video Input Connector 3. Component Video Input Connector (YPbPr) 4. BNC Input Connector (YPbPr/RGBHV) TM 5. Kensington Lock Port 6. RJ-45 Networking Connector 7. VGA-Out Connector (Monitor Loop-through Output) 8. VGA2-In/YPbP
Resumen del contenido incluido en la página 10
Introduction Remote Control 1 1. Power On 2. Power Off 17 3. Function 2 (Program- mable see P.47) 18 2 4. Lens Zoom +/- 19 3 5. Lens Shift 6. LED Indicator 20 4 7. Display Mode 8. Keystone +/- 5 9. 12V Trigger On/Off 21 6 10. YPbPr 11. Re-Sync 22 12. VGA 1 13. VGA 2 14. BNC 23 7 15. S-Video 16. Numbered keypad 24 8 (for password input) 17. Freeze 9 18. AV mute 25 10 19. Function 1 (Program- mable see P.47) 26 11 20. Lens Focus +/- 21. Enter/Help 27 12 22. Four Directional 28 13 Select
Resumen del contenido incluido en la página 11
Installation Connecting the Projector Install the Projection Lens 1 4 3 Before install or replacing the lens, switch off the power to the projector Avoid using the remote control or 2 projector keypad button to adjust the lens shift or zoom/ focus while the lens attachment process is carried out. 6 5 Install Lens Procedure: 1. Unscrew the 2 screws and lift up the lens door. 1 2. Remove the projector cap. 2 3. Push the release lever up to release the lock. 3 4. Remove the lens cap
Resumen del contenido incluido en la página 12
INFO. Installation Connect to Computer/Notebook SOURCE RE-SYNC LENS SHIFT 5 4 3 2 MENU ENTER FOCUS AV MUTE ZOOM S-VIDEO VIDEO Y Pb Pr R G B H V 1 RJ45 12V OUT RS232 HDMI 2 HDMI 1 VGA-OUT VGA 2-IN VGA 1-IN Due to the difference in applications 6 for each country, some regions may +12V Output have different accessories. (*) Optional accessory 1....................................................................................................Power Cord 2...............................
Resumen del contenido incluido en la página 13
E62405SP R INFO. Installation Connect to Video Sources DVD Player, Set-top Box, HDTV receiver S-Video Output 5 4 Composite Video Output 7 6 3 LENS SOURCE RE-SYNC SHIFT MENU ENTER FOCUS AV MUTE ZOOM S-VIDEO VIDEO Y Pb Pr 2 R G B H V RJ45 12V OUT RS232 HDMI 2 HDMI 1 VGA-OUT VGA 2-IN VGA 1-IN 1 8 3 +12V Output Due to the difference in applications 1....................................................................................................Power Cord for each 2........................
Resumen del contenido incluido en la página 14
INFO. Installation Powering the projector On / Off Powering On the Projector 1. Remove the projector cap. 1 2. Securely connect the power cord and signal cable. Power on the switch 2 and the Power LED flashes Red. 3. Turn on the lamp by pressing “ ” button either on the rear of the projector or on the remote. The POWER LED will now When Power turn Blue. 3 mode (Standby) is set to Eco, the The startup screen will display in approximately 10 seconds. VGA and RJ45 The first time you use
Resumen del contenido incluido en la página 15
INFO. Installation Powering off the Projector 1. Press the “ ” button on the remote control or press the “ ” button on the control panel to turn off the projector. 4 The following message will be displayed on the screen. Press the “ ” button on the remote control or press the “ ” button on the control panel again 4 to confirm otherwise the message will disappear after 15 seconds. When you pressing for the second time, the projector will shut down. 2. The cooling fans continue to operate f
Resumen del contenido incluido en la página 16
Installation Warning Indicator When the warning indicators (see below) come on, the projector will automatically shutdown: Contact the “LAMP1” or “LAMP2” LED indicator is lit red and if nearest service “POWER” LED indicator flashes red. center if the projector displays “TEMP” LED indicator is lit red and if “POWER” LED these symptoms. indicator flashes red. This indicates the projector has See pages overheated. Under normal conditions, the projector can be 67-68 for more s
Resumen del contenido incluido en la página 17
Installation Adjusting the Projected Image Adjusting the Projector’s Height The projector is equipped with elevator feet for adjusting the image height. 1. Locate the adjustable foot you wish to modify on the underside of the projector. 2. Rotate the adjustable ring clockwise to raise the projector or counter clockwise to lower it. Repeat with the remaining feet as needed. Tilt-Adjustment Feet Tilt-Adjustment Ring 17 English
Resumen del contenido incluido en la página 18
Height (H) Installation Adjusting the Projector’s Position To determine where to position the projector, consider the size and shape of your screen, the location of your power outlets, and the distance between the projector and the rest of your equipment. Example: ST1 Lens: The projector will focus at distances from 3.08 to 68.6 feet (0.94 to 20.9 meters). 60%H Width(W) 20%H 10%W 10%W 18 English
Resumen del contenido incluido en la página 19
Installation Lens Optoma Model Name WT1 WT2 ST1 TZ1 TZ2 Focal Length (f) (mm) 11.73 18.1~21.72 21.5~28.7 28.6~54.33 54.06~102.7 F number 2.2 2.2-3.33 2.0-3.0 2.2-3.0 2.3~3.16 Zoom Range (Ratio) Fixed 1.2x 1.33x 1.9x 1.9x Zoom & Focus Adjust- Motorized ment Throw Ratio 0.77 1.2~1.45 1.45~1.94 1.94~3.67 3.67~6.98 Throw Distance (m) 0.5~8.3 0.78~15.6 0.94~20.9 1.25~39.5 2.37~75.2 Throw Distance (feet) 1.64~27.23 2.56~51.18 3.08~68.57 4.10~129.59 7.78~246.72 Projection Image Size 30”~500” inches Hor
Resumen del contenido incluido en la página 20
INFO. User Controls Control Panel & Remote Control Control Panel LENS SOURCE RE-SYNC SHIFT MENU ENTER FOCUS AV MUTE ZOOM S-VIDEO VIDEO Y Pb Pr Using the Control Panel R Refer to the “Power On/Of G B H V f the Projector” section on Power pages 14-15. SOURCE Press “SOURCE” to select an input signal. RJ45 Automatically synchronize the projector to the input RE-SYNC RS232 12V OUT HDMI 2 HDMI 1 source. VGA-OUT VGA 2-IN VGA 1-IN LENS SHIFT Adjust Lens shift up/down/left/right Information Display the
