Resumen del contenido incluido en la página 1
Portable Projector
VT700
User’s Manual
The projector's model name indicated on the projector's label is VT700
and VT700G respectively.
All two models are referred to as VT700 throughout the user's manual
except some of the specifications pages.
Resumen del contenido incluido en la página 2
© NEC Display Solutions, Ltd. 2007 1st edition May 2007 • IBM is a trademark or registered trademark of International Business Machines Corporation. • Macintosh, Mac OS X and PowerBook are trademarks of Apple Inc. registered in the U.S. and other countries. • Microsoft, Windows and PowerPoint are trademarks or registered trademarks of Microsoft Corporation. • VESA is a registered trademark of Video Electronics Standards Association. • Other product and company names mentioned in this user's manu
Resumen del contenido incluido en la página 3
Important Information Safety Cautions Precautions Please read this manual carefully before using your NEC VT700 projector and keep the manual handy for future reference. Your serial number is located on the bottom of your projector. Record it here: CAUTION To turn off main power, be sure to remove the plug from power outlet. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible. CAUTION TO PREVENT SHOCK, DO NOT OPEN THE CABINET. THERE A
Resumen del contenido incluido en la página 4
Important Information WARNING TO CALIFORNIA RESIDENTS: Handling the cables supplied with this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. WASH HANDS AFTER HANDLING. RF Interference (for USA only) WARNING The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by NEC Display Solutions of America, Inc. in this manual. Failure to comply with this governmen
Resumen del contenido incluido en la página 5
Important Information Place the projector in a horizontal position The tilt angle of the projector should not exceed 10 degrees, nor should the projector be installed in any way other than the desktop and ceiling mount, otherwise lamp life could decrease dramatically. 10 Fire and Shock Precautions • Ensure that there is sufficient ventilation and that vents are unobstructed to prevent the build-up of heat inside your projector. Allow at least 4 inches (10cm) of space between your projector and a
Resumen del contenido incluido en la página 6
Important Information CAUTION • Do not use the tilt-foot for purposes other than originally intended. Misuses such as gripping the tilt-foot or hanging on the wall can cause damage to the projector. • Do not send the projector in the soft case by parcel delivery service or cargo shipment. The projector inside the soft case could be damaged. • When carrying the projector by the carrying handle, make sure the two screws that attach the carrying handle to the projector cabinet are tight. Insufficie
Resumen del contenido incluido en la página 7
Table of Contents Important Information ----------------------------------------------------------- i 1. Introduction ---------------------------------------------------------------------- 1 What's in the Box? --------------------------------------------------------------------------------- 1 Introduction to the Projector --------------------------------------------------------------------- 2 Part Names of the Projector ---------------------------------------------------------------------
Resumen del contenido incluido en la página 8
Table of Contents 4. Convenient Features ------------------------------------------------------ 28 Turning off the Image and Sound ------------------------------------------------------------ 28 Freezing a Picture -------------------------------------------------------------------------------- 28 Enlarging a Picture ------------------------------------------------------------------------------- 28 Changing Lamp Mode-------------------------------------------------------------------------
Resumen del contenido incluido en la página 9
OFF ON POWER MAGNIFY PIC-MUTE PAGE UP DOWN MENU ENTER EXIT L-CLICK R-CLICK MOUSE VIDEO COMPUTER AUTO ADJ. 1 S-VIDEO LAMP MODE 2 VOLUME ASPECT HELP PICTURE FREEZE 1. Introduction What's in the Box? Make sure your box contains everything listed. If any pieces are missing, contact your dealer. Please save the original box and packing materials if you ever need to ship your projector. Projector Lens cap (24FT9641) Soft case (24BS7582) Power cable VGA signal cable Remote control Batteries (AAA2) (
Resumen del contenido incluido en la página 10
1. Introduction Introduction to the Projector This section introduces you to your new projector and describes the features and controls. Congratulations on Your Purchase of the Projector This projector is one of the very best projectors available today. The projector enables you to project precise images up to 300 inches across (measured diagonally) from your PC or Macintosh computer (desktop or notebook), VCR, DVD player, document camera, or a laser disc player. You can use the projector on a
Resumen del contenido incluido en la página 11
ENTER MENU ON/STAND BY SOURCE AUTO ADJ. SELECT LAMP STATUS POWER ZOOM FOCUS 1. Introduction Part Names of the Projector Front/Top Zoom Lever ( → page 22) Controls ( → page 5) Ventilation (inlet) / Filter Cover Remote sensor ( → page 48) ( → page 8) Two filters Focus Ring ( → page 22) Built-in Security Slot ( )* Lens Lens Cap * This security slot supports the MicroSaver ® Security System. MicroSaver ® is a registered trademark of Kensington Microware Inc. The logo is trademarked and owned by K
Resumen del contenido incluido en la página 12
1. Introduction Bottom Rear Foot (Left / Right) ( → page 21) Adjustable Tilt Foot ( → page 21) Adjustable Tilt Foot Button Lamp Cover ( → page 21) ( → page 50) Attaching the supplied carrying handle You can carry the projector by attaching the supplied carrying handle securely to the projector. To attach the supplied carrying handle, use a Phillips-head screwdriver and the supplied two screws. Place a soft cloth on the working surface before turning the projector over to prevent scratching the t
Resumen del contenido incluido en la página 13
ENTER 1. Introduction Top Features 1 8 7 MENU SELECT 10 LAMP STATUS 2 POWER 9 ON/STAND BY SOURCE AUTO ADJ. 3 4 5 6 1. LAMP Indicator (→page 50,53) 2. STATUS Indicator (→page 53) 3. POWER Indicator (→page 18,26,53) 4. POWER Button (ON / STAND BY) ( ) (→page 18,26) 5. SOURCE Button (→page 20) 6. AUTO ADJ. Button (→page 25) 7. MENU Button (→page 34) 8. SELECT / Volume Buttons / Key- stone Buttons (→page 23,25) 9. ENTER Button 10. EXIT Button 5 EXIT
Resumen del contenido incluido en la página 14
1. Introduction Terminal Panel Features 5 8 9 2 1 S-VIDEO L PC CTRL COMPUTER 2 (DVI-I) IN AUDIO IN COMPUTER 1 IN IN MONITOR OUT (COMP 1) AUDIO OUT R VIDEO IN AUDIO IN 6 7 3 4 1. COMPUTER 1 IN/ Component Input Connector (Mini D-Sub 15 Pin) ( →page 11,13) 2. AUDIO IN Mini Jack (Stereo Mini) ( →page 11,12,15) 3. AUDIO OUT Mini Jack (Stereo Mini) ( →page 14) 4. MONITOR OUT Connector (Mini D-Sub 15 Pin) (→page 14) 5. S-VIDEO IN Connector (Mini DIN 4 Pin) (→page 16) 6. VIDEO IN Connector (RCA) ( →page
Resumen del contenido incluido en la página 15
1. Introduction Part Names of the Remote Control 1 OFF ON POWER 3 2 MAGNIFY PIC-MUTE PAGE UP 4 6 DOWN 5 MENU 7 8 ENTER EXIT 9 10 L-CLICK R-CLICK MOUSE 11 12 VIDEO COMPUTER COMPUTER AUTO ADJ. 1 16 13 S-VIDEO LAMP MODE 15 2 14 18 VOLUME ASPECT HELP 19 21 PICTURE FREEZE 17 22 20 12. MOUSE R-CLICK Button* (→ page 32,33) 1. Infrared Transmitter 13. VIDEO Button (→ page 8) (→ page 20) 2. POWER ON Button 14. S-VIDEO Button (→ page 18) (→ page 20) 3. POWER OFF Button 15. COMPUTER 1/2 Button (→ page 26
Resumen del contenido incluido en la página 16
1. Introduction Battery Installation 1 2 3 Press firmly and slide the Install new batteries (AAA). Slip the cover back over the battery cover off. Ensure that you have the batteries until it snaps into place. batteries' polarity (+/–) aligned Do not mix different types of correctly. batteries or new and old batteries. Remote Control Precautions • Handle the remote control carefully. • If the remote control gets wet, wipe it dry immediately. •Avoid excessive heat and humidity. • Do not heat, take
Resumen del contenido incluido en la página 17
E NTE R N R E TE M E NU M ENU OSN /T AN B D Y S O UR EC A TU O AD J. ON/ S T AND B Y SOURC E AU T O AD .J SE L E CT T AL TA UM P POSW E R S SEL E CT STAL TA U S MP PO WE R 300" 240" 200" 180" 150" 120" 100" 80" 60" 40" 30" 21" Z OO M ZOOM F O CU S F OCUS 2. Installation and Connections This section describes how to set up your projector and how to connect video and audio sources. Your projector is simple to set up and use. But before you get started, you must first: 1 Set up a screen and the pro
Resumen del contenido incluido en la página 18
2. Installation and Connections Throw Distance and Screen Size The following shows the proper relative positions of the projector and screen. Refer to the table to determine the position of installation. Distance Chart C B =Vertical distance between lens center and screen center C = Throw distance D =Vertical distance between lens center and Screen center screen bottom (top of screen for ceiling application) B α = Throw angle Lens center α D NOTE: Distances may vary +/-5%. Screen bottom Projecto
Resumen del contenido incluido en la página 19
2. Installation and Connections Making Connections NOTE: When using with a notebook PC, be sure to connect the projector and notebook PC while the projector is in standby mode and before turning on the power to the notebook PC. In most cases the output signal from the notebook PC is not turned on unless connected to the projector before being powered up. * If the screen goes blank while using your remote control, it may be the result of the computer's screen-saver or power management software.
Resumen del contenido incluido en la página 20
2. Installation and Connections When Viewing a DVI Digital Signal To project a DVI digital signal, be sure to connect the PC and the projector using a DVI cable (not supplied) before turning on your PC or projector. Turn on the projector first and select Computer 2 (Digital) from the source menu before turning on your PC. Failure to do so may not activate the digital output of the graphics card resulting in no picture being displayed. Should this happen, restart your PC. Do not disconnect the DV
