Resumen del contenido incluido en la página 1
DLA-HX1U/DLA-HX1E
®
®
PROJECTOR
INSTRUCTIONS
DLA-HX1U/DLA-HX1E
OPERATE
PC VIDEO
W
DIGITAL
V-KEYSTONE H-KEYSTONE SCREEN ZOOM
S
FREEZE
VOLUME FOCUS QUICK ALIGN.
MENU EXIT
ENTER
PRESET HIDE
For customer Use:
Enter below the Serial No. which is located
on the side panel of the cabinet. Retain
this information for future reference.
Model No. DLA-HX1U
n
Serial No.
HX-1E_Cover_Eng.p65 3 10/3/03, 6:05 PM
Resumen del contenido incluido en la página 2
SAFETY PRECAUTIONS About burning-in of the D-ILA device IMPORTANT INFORMATION Do not allow the same still picture to be projected for a long time or an abnormally bright video picture to be projected. NOTICE (For USA) Do not project video images with high-intensity or high contrast on a screen. The video image could be burnt into the D-ILA Language for Manuals of Products using HID Lamps device. (that contains mercury) Use special care when projecting video games or computer pro- This product ha
Resumen del contenido incluido en la página 3
Safety Precaution – The product should be placed more than one foot away from – Slots and openings in the cabinet are provided for ventilation. heat sources such as radiators, heat registers, stoves, and These ensure reliable operation of the product and protect it other products (including amplifiers) that produce heat. from overheating. These openings must not be blocked or – When connecting other products such as VCR’s, and per- covered. (The openings should never be blocked by placing sonal
Resumen del contenido incluido en la página 4
Safety Precaution POWER CONNECTION POWER CONNECTION (United Kingdom only) WARNING: Do not cut off the main plug from this equipment. WARNING: If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then Do not cut off the main plug from this equipment. obtain an appropriate safety approved extension lead or adapter or consult your dealer. If the plug fitted is not suitable for the power points in your If nonetheless the mains plug is
Resumen del contenido incluido en la página 5
Caution About burning-in of the D-ILA device How to use the [SCREEN TRIGGER] terminal cable ● Do not allow the same still picture to be projected for a ● It may cause short circuit if the supplied [SCREEN TRIG- long time or an abnormally bright video image to be pro- GER] terminal cable is used directly. When using the ca- jected. ble, connect it to the screen before connecting to this Do not project video images with high-intensity or high con- unit. trast on a screen. The video image could be
Resumen del contenido incluido en la página 6
Contents SAFETY PRECAUTIONS ............................................ 2 Adjustments and Settings Using Menus ............... 32 The Menu Structure.............................................................. 32 Caution ........................................................................ 5 The Menu Operation Buttons ............................................... 35 Accessories ................................................................ 6 The Procedure for Menu Operation ............
Resumen del contenido incluido en la página 7
Controls and Features Front Side/ Top Surface/ Left Side p Zoom Ring 9 Focus Ring 1 Control Panel 8 Remote Sensor (Front) 2 AC Power Input Terminal 7 Air Inlet 4 Foot Lever 3 Carrying Handle (for front adjustable foot) 6 Lens Cap 5 Lens 4 Foot Lever (for front adjustable foot) Using the Carrying Handle 7 Air Inlets (on the front, right, and bottom side of 1 Control Panel For details, See ‘Control Panel on the Projector’. projector) (☞ page 10, 11) The air inlets absorb air to cool the internal c
Resumen del contenido incluido en la página 8
Controls and Features Rear Side/ Right Side/ Bottom Surface t Remote Sensor (Rear) q Connector Panel r Exhaust Vent Bottom Surface w Speaker y Front Adjustable Foot 7 Air Inlet e Lamp Cover 7 Air Inlet u Filter i Rear Fixed Foot Blocked as it is not in use. Opening it forcibly will cause damage to the machine. q Connector Panel t Remote Sensor (Rear) For details, refer to ‘Connector Panel’. (☞ page 9) When operating with the remote control, aim it towards this sensor. (☞ page 18) w Speaker •A re
Resumen del contenido incluido en la página 9
Controls and Features Connector Panel 3 [PC3] Input Terminal 1 [PC2] Input Terminal 2 [PC1] Input Terminal R PR/CR G Y B PB/CB H/CSVDVI PC3 PC1 PC2 SCREEN RS-232C OUT RS-232C IN Y/C VIDEO REMOTE TRIGGER AUDIO IN CONTROL VIDEO IN 4 [SCREEN 6 [REMOTE] 8 [Y/C] Input TRIGGER] Terminal Terminal Terminal 5 [AUDIO IN] 7 [CONTROL RS232C 9 [VIDEO] Input Terminal IN/OUT] Terminal Terminal 1 [PC2] Input terminal (BNC x 5) 4 [SCREEN TRIGGER] Terminal This is an input terminal for component signals (Y, CB, C
Resumen del contenido incluido en la página 10
Controls and Features Control Panel on the Projector 1 [STAND BY] indicator 8 [TEMP] indicator STAND BY 9 [LAMP] indicator LAMP TEMP OPERATE 2 [OPERATE] indicator p [VIDEO] button PC VIDEO q [PC] button w [H-KEYSTONE] button 3 [OPERATE] button V-KEYSTONE H-KEYSTONE VOL. 4 [VOL.] (volume) button e [V-KEYSTONE] button MENU EXIT r [MENU] button 5 [EXIT] button ENTER t Cursor button 6 [ENTER] button ( / / / ) PRESET HIDE y [PRESET] button 7 [HIDE] button Indicator Display on the Control Panel
Resumen del contenido incluido en la página 11
Controls and Features Control Panel on the Projector 1 [STAND BY] Indicator 9 [LAMP] Indicator Light on : In stand by mode. Light on : Indicates the lamp has been used for more than Blinking : In cool down mode. 1900 hours. Blinking : Indicates the lamp has been used for more than 2 [OPERATE] Indicator 2000 hours. Please change the lamp. (☞ page 10, 47, 55) Light on : During projection. p [VIDEO] button 3 [OPERATE] button Use this button to select a device such as a video con- When this projecto
Resumen del contenido incluido en la página 12
Controls and Features Remote Control Unit q [VIDEO] button 1 Remote Control’s signal transmitter w [PC] button 2 [OPERATE] button OPERATE PC VIDEO e [H-KEYSTONE] button 3 [SCREEN] button (Not functional on this unit.) W 4 [DIGITAL ZOOM] button DIGITAL V-KEYSTONE H-KEYSTONE SCREEN ZOOM r [V-KEYSTONE] button S FREEZE 5 [FREEZE] button t [VOLUME] button VOLUME FOCUS QUICK ALIGN. 6 [QUICK ALIGN.] (quick alignment) button y [FOCUS] button (Not functional on this unit.) MENU EXIT 7 [EXIT] button u [ME
Resumen del contenido incluido en la página 13
Controls and Features 1 Remote Control’s signal transmitter 9 [HIDE] button Use this button to temporarily halt the audio and visual out- (☞ page 18) put. Press again to resume. 2 [OPERATE] button (☞ page 29) When the projector is in standby mode, pressing this but- p Cursor ( / / / ) button ton for one second or more will turn on the projector and light up the [OPERATE] indicator. Press it one second or These buttons are used in the menu mode to select an more again and the projector
Resumen del contenido incluido en la página 14
Controls and Features Loading Batteries into the Remote Control Please load batteries into the remote control. If the remote control starts to work erratically, replace the batteries. Precautions for using batteries 1. Open the back cover • Push the hook on the back cover lightly in the direc- If batteries are used incorrectly, they may crack or leak. This tion of the arrow and lift it up. could cause fire, burn, malfunction, staining or damaging of the surroundings. Beware of the following: •
Resumen del contenido incluido en la página 15
Installing the Projector Precautions for Installation Please read the following properly when installing the projector. Installation Environment Precaution for Usage Please do not install or use this projector in the follow- This projector uses a light-source lamp which reaches ing places. The projector is a precision device and do- high temperatures when projecting. ing so could cause a fire or malfunction. Please DO NOT use it in the following ways as doing so • Where there is water, humidity
Resumen del contenido incluido en la página 16
Installing the Projector Installing the Projector against the Screen The picture quality may deteriorate when performing KEYSTONE compensation. It is recommended to place the projector perpen- dicularly to the screen. Side View Top View •Trapezoidal-distortion can be corrected using the [KEYSTONE]* buttons on the projector. (☞ page 30) Up to approximately 10° upward and downward from the vertical line. Up to approximately 30° upward and downward from the horizontal line. * If the KEYSTONE co
Resumen del contenido incluido en la página 17
Installing the Projector Projection Distance and Screen Size • This projector uses 1.3x manual zoom lens for projection. • Although the focusable projection distance is about 1.6 m ~ 12 m, the projection distance recommendable for performance is about 2 m ~ 8 m. Install the projector within this range and adjust the screen size when the aspect ratio of the screen is 16:9. • If the KEYSTONE is adjusted, the screen becomes smaller. (☞ page 30) Screen installation 16:9 and 4:3 Screen A 4:3 aspect
Resumen del contenido incluido en la página 18
VOLUME FOCUS PRESET HIDE ENTER MENU EXIT QUICK ALIGN. FREEZE S V-KEYSTONE H-KEYSTONE SCREEN D ZO IG O IT M AL W PC VIDEO OPERATE PRESET HIDE ENTER MENU EXIT FOCUS VOLUME QUICK ALIGN. FREEZE S V-KEYSTONE H-KEYSTONE SCREEN D ZO IG O IT M AL W PC VIDEO OPERATE Installing the Projector Effective Range and Distance of the Remote Control Unit Using as a wireless remote control unit The operable distance of the remote control unit is about 7 m for direct reception. The remote control unit can be used
Resumen del contenido incluido en la página 19
Connecting to Various Devices Signals that can be input into the projector The following signals can be input to the projector. Video signals (1) Response to Decoder Decoder NTSC NTSC4.43 PAL SECAM Input terminal [VIDEO] O O O O 1 [Y/C] O O* O ––––– 3 2 2 2 2 [Y], [PB/CB], [PR/CR]* O* O* O* O* 4 2 2 2 2 [G], [B], [R], [H/Cs], [V]* O* O* O* O* 1 * : Responds if Y/C output is available. 2 * : Signifies that component signals (Y, PB, PR/Y, B-Y, R-Y/G, B, R, H/Cs, V) conform to the signal timing (
Resumen del contenido incluido en la página 20
Connecting to Various Devices Allowable input signals Horizontal resolution Vertical resolution Horizontal frequency Vertical frequency Signal Hor (Pixels) Ver (Lines) H (kHz) V (Hz) PC98 VESA350 640 350 37.86 84.13 PC/AT PC98 640 400 24.83 56.42 DOS/V VGA 60 Hz* 640 480 31.47 59.94 DVI* VGA 72 Hz 640 480 37.86 72.81 VGA 75 Hz 640 480 37.50 75.00 VGA 85 Hz 640 480 43.27 85.01 SVGA 56 Hz 800 600 35.16 56.25 SVGA 60 Hz* 800 600 37.88 60.32 SVGA 72 Hz 800 600 48.08 72.19 SVGA 75 Hz 800 600 46.88
