Resumen del contenido incluido en la página 1
Multimedia Projector
MODEL PLV-75/PLV-80
PLV75L/PLV-80L (Lensless)
Owner’s Manual
Resumen del contenido incluido en la página 2
TO THE OWNER Safety Precaution Before operating this projector, read this manual thoroughly and operate the projector properly. WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC This projector provides many convenient features and SHOCK, DO NOT EXPOSE THIS APPLIANCE functions. Operating the projector properly enables you to TO RAIN OR MOISTURE. manage those features and maintain it in better condition for a – This projector produces intense light from the projection considerable time. lens. Do
Resumen del contenido incluido en la página 3
SAFETY INSTRUCTIONS All the safety and operating instructions should be read before This projector should be operated only from the type of power the product is operated. source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized dealer or Read all of the instructions given here and retain them for later local power company. use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp
Resumen del contenido incluido en la página 4
COMPLIANCES Federal Communication Commission Notice Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communi
Resumen del contenido incluido en la página 5
TABLE OF CONTENTS FEATURES AND DESIGN 6 COMPUTER INPUT 24 SELECTING INPUT SOURCE 24 SELECTING COMPUTER SYSTEM 24 PREPARATION 7 PC ADJUSTMENT 26 AUTO PC ADJUSTMENT 26 NAME OF EACH PART OF PROJECTOR 7 MANUAL PC ADJUSTMENT 27 SETTING-UP PROJECTOR 8 PICTURE IMAGE SELECT 29 CONNECTING AC POWER CORD 8 IMAGE LEVEL SELECT 29 POSITIONING PROJECTOR 9 PICTURE SCREEN ADJUSTMENT 30 LENS INSTALLATION 9 PICTURE SCREEN SELECT 30 ADJUSTABLE FEET 10 INSTALLING PROJECTOR IN PROPER POSITION 10 MOVING PROJECTOR 11 V
Resumen del contenido incluido en la página 6
FEATURES AND DESIGN This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ◆ Compact Design ◆ Keystone Correction This projector is extremely compact in size and weight. Positioning of a projector may result in distorted image It is designed to carry and work anywhere you wish to being displayed in
Resumen del contenido incluido en la página 7
Resumen del contenido incluido en la página 8
PREPARATION SETTING-UP PROJECTOR CONNECTING AC POWER CORD This projector uses nominal input voltages of 100-120 V or 200-240 V AC. This projector automatically selects correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce risk of electrical shock, do not plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of type of power supply being in use. Connect a projector w
Resumen del contenido incluido en la página 9
Resumen del contenido incluido en la página 10
PREPARATION ADJUSTABLE FEET Picture tilt and projection angle can be adjusted by rotating ADJUSTABLE FEET. Projection angle can be adjusted to 10.5 degrees. Lift front of a projector and pull FEET LOCK LATCHES 1 on both sides of a projector. Release FEET LOCK LATCHES to lock ADJUSTABLE 2 FEET and rotate ADJUSTABLE FEET to fine tune position and tilt. To shorten ADJUSTABLE FEET, lift front of a projector 3 and pull and undo FEET LOCK LATCHES. Position and keystone distortion of image can be ad
Resumen del contenido incluido en la página 11
Resumen del contenido incluido en la página 12
CONNECTING PROJECTOR TERMINALS OF PROJECTOR This projector has input and output terminals on its back for connecting computers and video equipment. Refer to figures on pages 12 to 14 and connect properly. INPUT TERMINAL (DIGITAL) AUDIO INPUT 2 JACK INPUT TERMINAL (ANALOG) Connect computer output Connect computer output Connect an audio output (Analog HDB 15 pin type) (Digital DVI-D type) to this (stereo) from computer to to this terminal. terminal. this jack. (Refer to P13.) HD (HDCP Compat
Resumen del contenido incluido en la página 13
Resumen del contenido incluido en la página 14
CONNECTING PROJECTOR CONNECTING TO VIDEO EQUIPMENT Cables used for connection (✽ = Cable is not supplied with this projector.) • Video Cable (RCA x 1 or RCA x 3) ✽ • DVI-Digital Cable (for Single Link T.M.D.S.) ✽ • BNC Cable ✽ • Audio Cable (RCA x 2) ✽ • S-VIDEO Cable ✽ • HDB 15 pin-SCART 21 pin Cable ✽ Video Source (example) Component video output equipment. Video Cassette Recorder (such as DVD player or high-definition TV source.) Video Disc Player RGB Scart Composite Component Video Composite
Resumen del contenido incluido en la página 15
Resumen del contenido incluido en la página 16
BEFORE OPERATION REMOTE CONTROL BATTERIES INSTALLATION Remove battery Slide batteries into Replace compartment lid. 1 2 3 compartment lid. compartment. Two AA size batteries Pull up lid and For correct polarity (+ and remove it. –), be sure battery terminals are in contact with pins in compartment. To insure safe operation, please observe following precautions : ● Use (2) AA, UM3 or R06 type alkaline batteries. ● Replace two batteries at same time. ● Do not use a new battery with an used battery
Resumen del contenido incluido en la página 17
BEFORE OPERATION TOP CONTROLS AND INDICATORS This projector has CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on its top. LAMP REPLACE INDICATOR WARNING TEMP. INDICATOR READY INDICATOR LAMP INDICATOR Turns to yellow when Flashes red when Lights green when a Becomes dim when a life of projection lamp internal projector projector is ready to be projector is turned on. draws to an end. temperature is too turned on. And it And bright when a Flashes yellow when high. (P44, 53-54) flashes green in
Resumen del contenido incluido en la página 18
Resumen del contenido incluido en la página 19
BEFORE OPERATION MENU BAR FOR PC SOURCE Press MENU BUTTON while connecting to PC input source. SETTING MENU SCREEN MENU IMAGE SELECT MENU Used to adjust size Used to change Used to select PC SYSTEM MENU GUIDE WINDOW of image. [Normal settings of projector image level among / Full / True / Digital or reset Lamp Standard, Real Used to select Shows selected zoom +/–] Replace Counter. and Image 1 ~ 10. computer system. item of ON- (Refer to P30) (Refer to P38-43) (Refer to P29) (Refer to P24, 25)
Resumen del contenido incluido en la página 20
BASIC OPERATION TURNING ON / OFF PROJECTOR TURNING ON THE PROJECTOR Complete peripheral connections (with a computer, VCR, 1 etc.) before turning on the projector. 16 Connect the projector's AC power cord into an AC outlet. 2 The LAMP Indicator lights RED, and READY Indicator lights GREEN. Press the POWER ON-OFF button on the top control or on 3 the remote control to ON. The LAMP Indicator dims, and the The preparation display disappears after 20 ~ 30 seconds. cooling fans start to operate.
