Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
TO THE OWNER Before operating this projector, read this manual thoroughly and operate the projector properly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in better condition for a considerable time. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents. If your projector seems to operate improperly, read this manual
Resumen del contenido incluido en la página 3
SAFETY INSTRUCTIONS All the safety and operating instructions should be read before This projector should be operated only from the type of power the product is operated. source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized dealer or Read all of the instructions given here and retain them for later local power company. use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp
Resumen del contenido incluido en la página 4
COMPLIANCES Federal Communication Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generated, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications
Resumen del contenido incluido en la página 5
TABLE OF CONTENTS FEATURES AND DESIGN 6 COMPUTER MODE 23 SELECTING INPUT SOURCE 23 SELECTING COMPUTER SYSTEM 23 PREPARATION 7 PC ADJUSTMENT 24 AUTO PC ADJUSTMENT 24 MANUAL PC ADJUSTMENT 25 NAME OF EACH PART OF PROJECTOR 7 COMPATIBLE COMPUTER SPECIFICATIONS 27 SETTING-UP PROJECTOR 8 PICTURE IMAGE ADJUSTMENT 28 CONNECTING AC POWER CORD 8 IMAGE LEVEL SELECT 28 POSITIONING PROJECTOR 9 IMAGE LEVEL ADJUSTMENT 29 ADJUSTABLE FEET 10 MOVING PROJECTOR 10 PICTURE SCREEN ADJUSTMENT 30 VIDEO MODE 31 CONNECTI
Resumen del contenido incluido en la página 6
FEATURES AND DESIGN This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. The projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. Compatibility Progressive Scan (for Video) This projector widely accepts various video and Progressive Scan function converts interlace video computer input signals including; signals into progressive scan signals an
Resumen del contenido incluido en la página 7
PREPARATION NAME OF EACH PART OF PROJECTOR FRONT TOP CONTROLS AND INDICATORS PROJECTION LENS INFRARED LENS COVER SPEAKERS REMOTE RECEIVERS BACK EXHAUST VENTS HOT AIR EXHAUSTED ! Air blown from Exhaust Vents is hot. When using or installing projector, the following precautions should be taken. Do not put any flammable object near these vents. Keep the rear grills at least 3’(1m) away from any object, especially heat-sensitive object. Do not touch this area, especially screws and metallic
Resumen del contenido incluido en la página 8
PREPARATION SETTING-UP PROJECTOR CONNECTING AC POWER CORD This projector uses nominal input voltages of 100-120 V or 200-240 V AC. The projector automatically selects the correct input voltage. It is designed to work with single- phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of the type of power supply being in use. Connect p
Resumen del contenido incluido en la página 9
PREPARATION POSITIONING THE PROJECTOR This projector is designed to project on a flat projection surface and it can be focused from 4.43’ (1.35m) ~ 45.9’ (14.0m). Refer to the figure below to adjust the screen size. RECOMMENDATION Brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to provide the best image. 45.9’ (14.0m) 34.1’ (10.4m) 400” Max. Zoom 22.9’ (7.0m) 300” 11.5’ (3.5m) 308” 200” 4.43’ (1.35m) 231” Min. Zoom 100” 154
Resumen del contenido incluido en la página 10
PREPARATION ADJUSTABLE FEET Picture tilt and projection angle can be adjusted by rotating Adjustable Feet. Projection angle can be adjusted to 9.0 degrees. Lift the front of projector and pull Feet Lock Latches on 1 both sides of projector. Release Feet Lock Latches to lock Adjustable Feet and 2 rotate Adjustable Feet to fine tune position and tilt. To shorten Adjustable Feet, lift the front of projector and 3 pull and undo Feet Lock Latches. Position and keystone distortion of the image can
Resumen del contenido incluido en la página 11
CONNECTING PROJECTOR TERMINALS OF PROJECTOR This projector has INPUT TERMINALS and OUTPUT TERMINALS on its side for connecting computers and video equipment. Refer to the figure on pages 11 to 13 and connect properly. INPUT 1 RGB SERIAL PORT R/C JACK R-AUDIO-L(MONO) INPUT 2 S-VIDEO G B R H/V V R-AUDIO-L(MONO) INPUT / OUTPUT VIDEO/Y C/Pb (Cb) Pr (Cr) INPUT 3 AUDIO OUT TERMINALS VIDEO/Y Pb (Cb) Pr (Cr) R-AUDIO-L RESET EXT.SP(8Ω ) R-AUDIO-L (MONO) BNC JACKS SERIAL PORT TERMINAL R/C JACK Connect co
Resumen del contenido incluido en la página 12
CONNECTING PROJECTOR CONNECTING TO VIDEO EQUIPMENT Cables used for connection (✽ = Cables are not supplied with this projector.) • Video Cable (RCA x 1) NOTE : • Video Cable (RCA x 3)✽ , (BNC x 1)✽ , (BNC x 2)✽ or (BNC x 3)✽ When connecting projector, AC Power Cords of • S-VIDEO Cable both projector and external equipment should be • Audio Cable (RCA x 2) disconnected from AC outlet. • Speaker Cable (Mini x 1 (stereo)) ✽ Component video output equipment. Video Source (example) (such as DVD pla
Resumen del contenido incluido en la página 13
CONNECTING PROJECTOR CONNECTING TO COMPUTER Cables used for connection (✽ = Cables are not supplied with this projector.) • VGA Cable (HDB 15 pin) ✽ NOTE : • Video Cable (BNC x 5) ✽ When connecting the cable, AC Power Cords of • MAC Adapter (in the case of connecting Macintosh computer) ✽ both projector and external equipment should be • Audio Cables (RCA x 2) or (RCA x 1 - Mini Plug (mono)) ✽ disconnected from AC outlet. Turn projector and peripheral equipment on before your computer is • Spea
Resumen del contenido incluido en la página 14
BEFORE OPERATION TOP CONTROLS AND INDICATORS This projector has CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on its top. TOP CONTROLS AND INDICATORS INDICATORS LAMP REPLACE INDICATOR WARNING TEMP. INDICATOR READY INDICATOR LAMP INDICATOR This indicator turns to This indicator flashes red This indicator lights green This indicator is dim when yellow when the life of when internal projector when projector is ready to projector is turned on. And Projection Lamp draws to temperature is too high. b
Resumen del contenido incluido en la página 15
BEFORE OPERATION TOP CONTROL FOCUS BUTTONS MENU BUTTON POWER ON–OFF BUTTON INPUT BUTTON Used to adjust focus. (P21) Used to select MENU Used to turn projector on Used to select input source operation. (P18, 19) or off. (P20) among INPUT 1, 2 or 3. (P23, 31) VOLUME BUTTONS ZOOM BUTTONS Used to adjust volume. Used to adjust zoom. (P21) ON-OFF (P22) MENU INPUT ZOOM FOCUS LENS SHIFT VOLUME SELECT AUTO PC ADJ. NORMAL LENS SHIFT BUTTONS Used to adjust lens shift. (P21) AUTO PC ADJ. BUTTON POINT BUT
Resumen del contenido incluido en la página 16
BEFORE OPERATION OPERATION OF REMOTE CONTROL Remote Control Unit can be used as either Wired or Wireless. WIRED REMOTE JACK When using as Wired Remote INPUT BUTTON Control, connect Remote Control Used to select input source. Cable to this jack. (P17) (P23, 31) MUTE BUTTON POWER ON-OFF BUTTON Used to mute sound.(P22) Used to turn projector on or off. MUTE INPUT ON-OFF (P20) VOLUME BUTTONS ZOOM BUTTONS VOLUME ZOOM FOCUS Used to adjust volume. (P22) Used to adjust zoom. (P21) FOCUS BUTTONS D.ZOO
Resumen del contenido incluido en la página 17
BEFORE OPERATION WIRED REMOTE CONTROL OPERATION When using this Remote Control Unit as Wired Remote Control, Connect Remote Control Unit to R/C JACK with Remote Control Cable (supplied). Batteries installation is required when using as Wired Remote Control Unit. Remote Control Cable (supplied) INPUT 1 R/C JACK REMOTE CONTROL BATTERIES INSTALLATION Remove the battery Slide 2 batteries into Replace the compartment 123 compartment lid. the compartment. lid. OPEN OPEN Press the lid Slide the lid Tw
Resumen del contenido incluido en la página 18
BEFORE OPERATION OPERATING ON-SCREEN MENU HOW TO OPERATE ON-SCREEN MENU REMOTE CONTROL You can control and adjust this projector through ON- POINT BUTTONS SCREEN MENU. Refer to the following pages to operate LENS SHIFT KEYSTONE Used to move the each adjustment on ON-SCREEN MENU. Pointer UP/ DOWN/ RIGHT/ LEFT. 1 DISPLAY MENU SELECT Press MENU button to display ON-SCREEN MENU. MENU NORMAL SELECT BUTTON 2 MOVING POINTER Used to select the item. Move the pointer (✽ see below) or adjust the value
Resumen del contenido incluido en la página 19
BEFORE OPERATION MENU BAR FOR PC SOURCE Press MENU BUTTON for PC input source. INPUT MENU IMAGE SELECT MENU SETTING MENU Used to select Used to select image Used to change settings SYSTEM MENU input source level among of projector and reset among INPUT 1, Used to select Standard, Real or Lamp Replace Counter. 2, or 3. computer system. Image 1 ~ 4. (Refer to P36, 37) (Refer to P23) (Refer to P23, 24) (Refer to P28) GUIDE WINDOW PC ADJUST MENU IMAGE ADJUST MENU SCREEN MENU Shows selected Used to
Resumen del contenido incluido en la página 20
BASIC OPERATION TURNING ON / OFF PROJECTOR TURNING ON PROJECTOR Complete the peripheral connections (with Computer, VCR, etc.) 1 before turning on projector. (Refer to "CONNECTING TO PROJECTOR" on Pages 11~13 for connecting that equipment.) Connect the projector's AC Power Cord into an AC outlet and 30 2 turn MAIN ON / OFF SWITCH to ON. LAMP Indicator lights RED, and READY Indicator lights GREEN. NOTE : When “On start” function is ON, this projector is turned on automatically by switching MAI
