Resumen del contenido incluido en la página 1
User’s Guide
Resumen del contenido incluido en la página 2
Notations Used in This Guide • Safety indications The documentation and the projector use graphical symbols to show how to use the projector safely. Please understand and respect these caution symbols in order to avoid injury to persons or property. This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling. Warning This symbol indicates information that, if ignored, could possibly result in personal injury or physical da
Resumen del contenido incluido en la página 3
Contents 3 Connecting Equipment ................... .................. 22 Notations Used in This Guide ........................ 2 Connecting a Computer .... ... . .. ... ... . ... . . ... .... .. ... .... . .. 22 Connecting Image Sources . . . . . . . . . . ... . . . ... . ... .. .. .. .. ... . . . . . 23 Connecting USB Devices . .. ... . . . .. .. ... ... . . . . .. ... .. ... .. ... . .. 25 Introduction Connecting External
Resumen del contenido incluido en la página 4
Contents 4 Cable layouts ........ . . . ........... . . ........ . . . ........... 67 Useful Functions About PJLink ... .. .. .. .. .. .. .. .. ... .. .. .. .. .. .. .. .. .. ... . ... . 68 About Crestron RoomView .... .. .. ... .. .. ... ... .. ... .. .. .. ... . .. 69 ® Projection Functions . ........ ................. ............. 46 Operating a projector from your computer . .... .. ... .. .... ... .. .. ... 69 Projecting Without a
Resumen del contenido incluido en la página 5
Contents 5 Problems Relating to Images ........................ .............. 99 How to replace the air filter .. .. .. .. .. .. .. .. .. .. .. .. ... .. .. .. .. . 116 No images appear .. .. .. .. .. ... . . . . . ... . ... .. .. .. .. .. .. .. .. .. 99 Moving images are not displayed (only the moving image portion turns black) . ... ... .... ... .... ... .. ... .... ... .... ... ... .. .... ... .... 100 Appendix P
Resumen del contenido incluido en la página 6
Introduction This chapter explains the projector's features and the part names.
Resumen del contenido incluido en la página 7
Projector Features 7 List of Functions by Model Available functions differ depending on the model being used. See the table below for a list of the functions available for each model. Function EB-925 EB-915W EB-910W EB-905 EB-900 EB-96W EB-95 *1 USB Display *2 HDMI Connection Auto V-Keystone WXGA Resolutions - -- - Quick Wireless *3 Connection Wired LAN Connection - - Wireless LAN *4 Connection Network Settings Slideshow *1 The USB display requires a commercially available USB cable. *2 The HDMI
Resumen del contenido incluido en la página 8
Projector Features 8 Detecting projector movements and automatically correcting Quick and Easy Set up, Projection, and Storage image distortion • Turn the projector on and off by simply plugging in or unplugging. This projector automatically corrects keystone distortion which occurs when • Project onto large screens from a short distance. positioning or moving the projector. • Make easy height adjustments with one lever. s "Correcting automatically (Auto V-Keystone)" p.36 • No cool down delay ma
Resumen del contenido incluido en la página 9
Projector Features 9 • Control Panel Lock restricts button operation on the control panel Easy connection to a computer with Quick Wireless You can use this to prevent people changing projector settings without By simply connecting the optional Quick permission at events, in schools, and so on. Wireless Connection USB Key to a computer, s "Restricting Operation (Control Panel Lock)" p.61 you can project the computer's screen. (Windows computers only) • Equipped with various anti-theft devices Th
Resumen del contenido incluido en la página 10
Part Names and Functions 10 All of the features in this guide are explained using illustrations of EB-925 Name Function unless otherwise mentioned. Press the foot lever to extend and retract the front foot. D Foot adjust lever s "Adjusting the Image Position" p.39 When setup on a surface such as a desk, extend the foot to E Front adjustable foot Front/Top adjust the position of the image. s "Adjusting the Image Position" p.39 A/V mute slide Close when not using the projector to protect the lens.
Resumen del contenido incluido en la página 11
Part Names and Functions 11 Name Function Rear When controlling the projector from a computer, connect J RS-232C port it to the computer with an RS-232C cable. This port is for control use and should not normally be used. s "ESC/VP21 Commands" p.67 Inputs audio from the microphone. K Mic port The security slot is compatible with the Microsaver L Security slot Security System manufactured by Kensington. s "Anti-Theft Lock" p.62 Plays back audio. Speaker M Receives signals from the remote control.
Resumen del contenido incluido en la página 12
Part Names and Functions 12 Name Function Base Pass a commercially available wire lock through here and D Security cable lock it in place. installation point s "Installing the wire lock" p.62 Name Function Attach the optional Ceiling Mount here when suspending Ceiling mount fixing A the projector from a ceiling. points (three points) s "Installing the Projector" p.19 s "Optional Accessories" p.118 Rear feet When setup on a surface such as a desk, turn to extend and B retract to adjust the horizo
Resumen del contenido incluido en la página 13
Part Names and Functions 13 Name Function Control Panel • Performs vertical keystone correction. D [w][v] buttons s "Correcting keystone distortion in vertical directions" p.36 • If pressed when the Configuration menu or the Help screen is displayed, these buttons select menu items and setting values. s "Using the Configuration Menu" p.74 s "Using the Help" p.94 [a] Decreases the volume. E [a][b] button [b] Increases the volume. s "Adjusting the Volume" p.40 [Help] button Displays and closes the
Resumen del contenido incluido en la página 14
Part Names and Functions 14 Name Function Remote Control Turns the projector power on or off. A [t] button s "From Installation to Projection" p.30 Each time you press the button, the input changes between B [Computer] button images from the Computer1 port and the Computer2 port. [Video] button Each time the button is pressed, the image cycles through C the S-Video, Video, and HDMI ports. • Enter the Password. D Numeric buttons s "Setting Password Protect" p.59 • Use this button to enter numbers
Resumen del contenido incluido en la página 15
Part Names and Functions 15 Name Function Name Function Enlarges or reduces the image without changing the [a] Decreases the volume. J [E-Zoom] buttons O [Volume] buttons projection size. [a][b] [z][x] [b] Increases the volume. s "Enlarging Part of the Image (E-Zoom)" p.53 s "Adjusting the Volume" p.40 Displays and closes the Configuration menu. K [Menu] button Displays the on-screen pointer. P [Pointer] button s "Using the Configuration Menu" p.74 s "Pointer Function (Pointer)" p.52 • When the
Resumen del contenido incluido en la página 16
Part Names and Functions 16 Name Function Replacing the remote control batteries Outputs remote control signals. X Remote control light- If delays in the responsiveness of the remote control occur or if it does not emitting area operate after it has been used for some time, it probably means that the batteries are becoming flat. When this happens, replace them with new batteries. Have two AA size manganese or alkaline batteries ready. You cannot use other batteries except for the AA size mangane
Resumen del contenido incluido en la página 17
Part Names and Functions 17 Caution Check the positions of the (+) and (-) marks inside the battery holder to ensure the batteries are inserted the correct way. Replace the battery cover. c Press the battery compartment cover until it clicks into place. Remote control operating range
Resumen del contenido incluido en la página 18
Preparing the Projector This chapter explains how to install the projector and connect projection sources.
Resumen del contenido incluido en la página 19
Installing the Projector 19 Installation Methods Warning • A special method of installation is required when suspending the projector The projector supports the following four different projection methods. from a ceiling (ceiling mount). If it is not installed correctly, it could fall Install the projector according to the conditions of the installation location. causing an accident and injury. • Project images from in front of • Project images from behind a • If you use adhesives on the Ceili
Resumen del contenido incluido en la página 20
Installing the Projector 20 • Install the projector so that it is parallel to the screen. When you correct keystone distortion, the projected image may be If the projector is installed at an angle to the screen, keystone distortion reduced. a occurs in the projected image. • Place the projector on a level surface. 16:10 Screen Size If the projector is tilted the projected image is also tilted. EB-915W 150” (320×200cm) 100” (220×130cm) 80” (170×110cm) 50” (110×67cm) • See the following if you can
