Resumen del contenido incluido en la página 1
Projector
8755H/8916/8913H/8912H
User's Manual (concise)
Thank you for purchasing this projector.
WARNING ►Before using this product, be sure to read all manuals for this
product. See “Using the CD manual” (15) to read the manuals in the CD.
After reading them, store them in a safe place for future reference.
Contents
Contents of package........................... Displaying the picture ......................... 7
Preparations ....................................... 2 Turning off the
Resumen del contenido incluido en la página 2
Preparations Fastening the lens cover To avoid losing the lens cover, please fasten the lens cover to the projector using the enclosed strap. Fix the strap to the strap hole of the lens cover. . Thread one end of the strap through the strap hole of the lens cover and make the loop at the end, and let the other end of the strap through the loop. Not have a knot in the strap at either end. Fix the strap to the strap hole of the projector. Thread 2. the other end of the strap through the
Resumen del contenido incluido en la página 3
Arrangement Refer to the illustrations and tables below to determine screen size and projection distance. The values shown in the table are calculated for a full size screen: 1024×768 a Screen size (diagonal) b Projection distance (±10%) c1 , c2 Screen height (±10%) On a horizontal surface Suspended from the ceiling • Keep a space of 30 cm or more between the sides of the projector and other objects such as walls. • Consult with your dealer before a special installation such as suspen
Resumen del contenido incluido en la página 4
Connecting your devices Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the following illustrations to connect them. PC RS-232C RGB OUT USB AUDIO OUT RGB OUT AUDIO OUT RGB IN Monitor AUDIO IN Speakers (with an amplifier) VCR/DVD Y CB/PB CR/PR L R VIDEO OUT L R L R player S-VIDEO OUT COMPONENT VIDEO OUT
Resumen del contenido incluido en la página 5
Connecting power supply Put the connector of the power cord into the . AC inlet of the projector. Firmly plug the power cord’s plug into the 2. outlet. AC inlet Power cord WARNING ►Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in fire and/or electrical shock. • Only use the power cord that came with the projector. If it is damaged, contact to your dealer to newly get correct one. • Only plug the power cord into an outlet whose vo
Resumen del contenido incluido en la página 6
Adjusting the projector's elevator When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector 10° horizontally. Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the front side of the projector within 10 degrees. This projector has 2 elevator feet and 2 elevator buttons. An elevator foot is adjustable while pushing the elevator button on the same side as it. Holding the p
Resumen del contenido incluido en la página 7
Displaying the picture Activate your signal source. Turn the signal . MY SOURCE/ VIDEO COMPUTER DOC.CAMERA source on, and make it send the signal to ASPECT AUTO SEARCH BLANK the projector. PAGE VOLUME MAGNIFY FREEZE UP ON VOLUME button DOWN OFF Use the VOLUME +/VOLUME - buttons to KEYSTONE MY BUTTON MUTE 2. 1 2 adjust the volume. MUTE button POSITION MENU To have the projector silent, press the MUTE ▲ cursor button ENTER button on the remote control. RESET ESC ▼ cursor button Pre
Resumen del contenido incluido en la página 8
Turning off the power Press the STANDBY/ON button on the projector STANDBY/ON button . POWER indicator or the remote control. The message "Power off?" will appear on the screen for about 5 seconds. Press the STANDBY/ON button again while the 2. message appears. The projector lamp will go off, and the POWER indicator will begin blinking in orange. Then the MY SOURCE/ VIDEO COMPUTER DOC.CAMERA ASPECT AUTO SEARCH BLANK MAGNIFY FREEZE PAGE VOLUME UP POWER indicator will stop blinking
Resumen del contenido incluido en la página 9
Replacing the lamp A lamp has finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended. To prepare a new lamp, contact to your dealer and tell the lamp type number. Type number : 456-8755H Lamp cover Turn the projector off, and unplug the power cord. . Allow
Resumen del contenido incluido en la página 10
HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE WARNING ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. In addition, when the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and for gas containing mercury to escape from the projector’s
Resumen del contenido incluido en la página 11
Cleaning and replacing the air filter Please check and clean the air filter periodically. When the indicators or a message prompts you to clean the air filter, comply with it as soon as possible. The air filter has two kinds of filters inside. Replace the filters when they are damaged or too soiled. To prepare the new filters, contact to your dealer and tell the following type number. Type number : MU05611 Filter cover When you replace the lamp, please replace the air filter. An air filter o
Resumen del contenido incluido en la página 12
Using the CD manual The other manuals for this product are written into the included CD-ROM titled “User’s Manual (detailed)”. Before using the CD-ROM, please read the following to ensure the proper use. System requirements The system for using the CD-ROM requires the following. Windows®: OS:Microsoft® Windows® 98, 98SE, NT4.0, Me, 2000/XP, or later CPU:Pentium® processor 133MHz / Memory:32MB or more Macintosh®: OS:Mac OS 10.2 or later CPU:Power PC® / Memory:32MB or more CD-ROM dr
Resumen del contenido incluido en la página 13
Regulatory notices Declaration of Conformity Trade name HITACHI Model Number CP-X201/CP-X301/CP-X401/CP-X450 Responsible Party Hitachi America, Ltd. Address 900 Hitachi way, Chula Vista, CA 91914-3556 U.S.A. Telephone Number +1 -800-225-1741 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
Resumen del contenido incluido en la página 14
Regulatory notices (continued) Information for users applicable in European Union countries 1. The manufacturer (Gemtek) hereby declare that this equipment (wireless network card), model SD-Link11g is in compliance ! 0560 with the essential requirements and other relevant provisions of Directive 1999/5/EC. 2. This symbol on the product or on its packaging means that your electrical and electronic equipment should be disposed at the end of life separately from your household wastes. There ar
Resumen del contenido incluido en la página 15
Specifications Item Specifications Product name Liquid crystal projector Panel size 1.6 cm (0.63 type) Liquid Crystal Drive system TFT active matrix Panel Pixels 786,432 pixels (1024 horizontal x 768 vertical) Zoom lens 8755H, 8912H : F=2.3~2.5 f=18.9~22.6 Lens F=1.6~1.8 f=18.9~22.6 8913H : 8916 : F=1.6~1.8 f=18.9~22.6 (approximately) 8912H, 8755H : 220W UHB Lamp 8913H, 8916 230W
Resumen del contenido incluido en la página 16
Warranty and after-service If an abnormal operation (such as smoke, strange odor or excessive sound) should occur, stop using the projector immediately. Otherwise if a problem occurs with the projector, first refer to the “Troubleshooting” of the “Operating Guide” in the CD and run through the suggested checks. If this does not resolve the problem, please contact to your dealer or service company. They will tell you what warranty condition is applied. Please check the following web address
