Resumen del contenido incluido en la página 1
Data Video Projector
Concise User’s Manual
MODELS: 8925H-RJ / 8926H-RJ
8956H-RJ / 8927HW-RJ
Information in this Guide may change due to product improvements. To obtain the latest
manuals, literature, and software please visit the Dukane web site at; www.dukane.com/av
and look at the specific model SUPPORT or DOWNLOADS section.
DUKANE CORP AV SERVICE DEPT
2900 Dukane Drive
St Charles, IL 60174
800-676-2487 / 630-762-4032
Fax 630-584-5156
avservice@dukane.com
www.du
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
Projector 8925H-RJ/8926H-RJ/8956H-RJ 8927HW-RJ User's Manual (concise) Thank you for purchasing this projector. Please read through this manual before using this product, in order to use safely and utilize well the product. WARNING ►Before using this product, be sure to read all manuals for this product. After reading them, store them in a safe place for future reference. ►Heed all the warnings and cautions in the manuals or on the product. ►Follow all the instructions in the manuals or on t
Resumen del contenido incluido en la página 4
First of all Entries and graphical symbols explanation The following entries and graphical symbols are used for the manuals and the product as follows, for safety purpose. Please know their meanings beforehand, and heed them. WARNING This entry warns of a risk of serious personal injury or even death. CAUTION This entry warns of a risk of personal injury or physical damage. NOTICE This entry notices of fear of causing trouble. Important safety instruction The followings are import
Resumen del contenido incluido en la página 5
Regulatory notices About Electro-Magnetic Interference In CANADA This Class B digital apparatus complies with Canadian ICES-003. In the US, and other places where the FCC regulations are applicable Declaration of Conformity Trade name HITACHI Model Number CP-X2514WN, CP-X3014WN(8926H-RJ), CP-X4014WN(8956H-RJ), CP-WX3014WN(8927HW-RJ) Responsible Party Hitachi America, Ltd. Address 900 Hitachi way, Chula Vista, CA 91914-3556 U.S.A. Telephone Number +1 -800-225-1741 This device complies with pa
Resumen del contenido incluido en la página 6
Regulatory notices (continued) About Waste Electrical and Electronic Equipment The mark is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE). The mark indicates the requirement NOT to dispose the equipment including any spent or discarded batteries or accumulators as unsorted municipal waste, but use the return and collection systems available. If the batteries or accumulators included with this equipment, display the chemical symbol Hg, Cd, or Pb,
Resumen del contenido incluido en la página 7
Preparing for the remote control Please insert the batteries into the remote control before using it. If the remote control starts to malfunction, try to replace the batteries. If you will not use the remote control for long period, remove the batteries from the remote control and store them in a safe place. Holding the hook part of the battery 13 2 1. cover, remove it. Align and insert the two AA batteries 2. (HITACHI MAXELL, Part No.LR6 or R6P) according to their plus and minus termin
Resumen del contenido incluido en la página 8
Arrangement Refer to tables T-1 and T-2 at the back of this manual as well as the following to determine the screen size and projection distance. The values shown in the table are calculated for a full size screen. Screen size Projection distance Projector top (from the projector's end) , : Screen height Projector bottom WARNING ►Install the projector where you can access the power outlet easily. ►Install the projector in a stable horizontal position. • Do not use any mounting accessor
Resumen del contenido incluido en la página 9
Connecting with your devices Before connecting the projector to a device, consult the manual of the device to confirm that the device is suitable for connecting with this projector and prepare the required accessories, such as a cable in accord with the signal of the device. Consult your dealer when the required accessory did not come with the product or the accessory is damaged. After making sure that the projector and the devices are turned off, perform the connection, according to the fol
Resumen del contenido incluido en la página 10
Fastening the adapter cover Use the supplied adapter cover to prevent the USB wireless adapter from coming off easily. 1 Loosen the screw (marked with triangle) 1. on the bottom left of the USB TYPE A port. Insert the tab of the cover into the hole 2 2. at the upper right of the USB TYPE A port in the direction of the arrow. 3 Align the screw holes on the projector 3. and the cover. Then insert the screw Tab removed from the projector into the hole and tighten the screw. WARNING
Resumen del contenido incluido en la página 11
Turning on the power Make sure that the power cord is firmly and correctly connected to the 1. projector and the outlet. STANDBY/ON button Make sure that the POWER indicator is POWER indicator 2. steady orange. Then remove the lens cover. Press the STANDBY/ON button on the 3. projector or the remote control. The projection lamp will light up and the POWER indicator will begin blinking in green. When the power is completely on, the indicator will stop blinking and light in steady gr
Resumen del contenido incluido en la página 12
Adjusting the projector’s elevator When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally. Using the feet can also tilt the projector 14° in order to project at a suitable angle to the screen, elevating the front side of the projector within 14 degrees. This projector has 2 elevator feet and 2 elevator buttons. An elevator foot is adjustable while pushing the elevator button on the same side as it. Holding the p
Resumen del contenido incluido en la página 13
Displaying the picture VIDEO COMPUTER MY SOURCE/ DOC.CAMERA Activate your signal source. Turn the 1. ASPECT AUTO SEARCH BLANK signal source on, and make it send the MAGNIFY FREEZE PAGE VOLUME UP ON VOLUME+ button signal to the projector. OFF DOWN VOLUME- button MY BUTTON MUTE KEYSTONE Use the VOLUME + / VOLUME - buttons MUTE button 2. to adjust the volume. MENU POSITION To have the projector silent, press the ENTER MUTE button on the remote control. ESC RESET Press the INPUT button o
Resumen del contenido incluido en la página 14
Turning off the power Press the STANDBY/ON button on the STANDBY/ON button 1. projector or the remote control. POWER indicator The message “Power off?” will appear on the screen for about 5 seconds. Press the STANDBY/ON button again 2. while the message appears. The projector lamp will go off, and the POWER indicator will begin blinking in orange. Then the POWER indicator will stop blinking and light in steady orange when the lamp cooling is complete. Attach the lens cover, after
Resumen del contenido incluido en la página 15
Replacing the lamp A lamp has finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended. To prepare a new lamp, make contact with your dealer and tell the lamp type number. Type number : 456-8755J Turn the projector off, and unplug the power cord. 1. 3 Lamp cov
Resumen del contenido incluido en la página 16
Replacing the lamp (continued) HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE WARNING ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. In addition, if the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and for gas containing mercury and
Resumen del contenido incluido en la página 17
Cleaning and replacing the air filter Please check and clean the air filter periodically. When the indicators or a message prompts you to clean the air filter, comply with it as soon as possible. The air filter has two kinds of filters inside. Replace the filters when they are damaged or too soiled. To prepare the new filters, make contact with your dealer and tell the following type number. Type number : MU06481 (Filter set) Filter cover When you replace the lamp, please replace the air filter. An a
Resumen del contenido incluido en la página 18
Using the CD manual The other manuals for this product are written into the included CD-ROM titled “User’s Manual (detailed)”. Before using the CD-ROM, please read the following to ensure the proper use. System requirements The system for using the CD-ROM requires the following. ® ® ® ® Windows : OS:Microsoft Windows 98, Windows 98SE, ® ® Windows NT 4.0, Windows Me, ® ® Windows 2000/Windows XP or later ® CPU:Pentium processor 133MHz / Memory:32MB or more ® ® Macintosh : OS:Mac OS
Resumen del contenido incluido en la página 19
Specifications Item Specification Product name Liquid crystal projector , , : Liquid Crystal 786,432 pixels (1024 horizontal x 768 vertical) Panel : 1,024,000 pixels (1280 horizontal x 800 vertical) Lamp 210 W UHP Speaker 16 W mono (8 W x 2) Power supply/ AC 100-120 V: 3.4 A, AC 220-240 V: 1.8 A Rated current Power AC 100-120 V: 330 W, AC 220-240 V: 310 W consumption Temperature 5 ~ 35 °C (Operating) range 317 (W) x 98 (H) x 288 (D) mm Size * Not including protruding parts. Refer to figure
Resumen del contenido incluido en la página 20
Troubleshooting - Warranty and after-service If an abnormal operation (such as smoke, strange odor or excessive sound) should occur, stop using the projector immediately. Otherwise if a problem occurs with the projector, first refer to “Troubleshooting” of User’s Manual - Operating Guide and Network Guide, and run through the suggested checks. If this does not resolve the problem, please consult your dealer or service company. They will tell you what warranty condition is applied. Please ch
