Resumen del contenido incluido en la página 1
MS619ST/MX620ST/MW621ST
Digital Projector
User Manual
Resumen del contenido incluido en la página 2
Table of contents Using the teaching templates............... 35 Important safety Presenting from a USB Reader............ 36 instructions ........................... 3 Shutting down the projector ............... 37 Direct power off..................................... 37 Introduction.......................... 7 Menu operation ...................................... 38 Projector features.....................................7 Shipping contents......................................8 Maintenance...
Resumen del contenido incluido en la página 3
Important safety instructions Your projector is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that you follow the instructions mentioned in this manual and marked on the product. Safety Instructions 1. Please read this manual before 5. In some countries, the line voltage is you operate your projector. Save NOT stable. This projector is it for future reference. designed to operate
Resumen del contenido incluido en la página 4
Safety Instructions (Continued) 7. The lamp becomes extremely hot 10. Do not place this product on an during operation. Allow the projector unstable cart, stand, or table. The to cool for approximately 45 minutes product may fall, sustaining serious prior to removing the lamp assembly damage. for replacement. 11. Do not attempt to disassemble this 8. Do not operate lamps beyond the projector. There are dangerous high rated lamp life. Excessive operation of voltages inside which may c
Resumen del contenido incluido en la página 5
Safety Instructions (Continued) 13. Do not place this projector in any of 14. Do not block the ventilation holes. - Do not place this projector on a the following environments. blanket, bedding or any other soft - Space that is poorly ventilated or surface. confined. Allow at least 50 cm - Do not cover this projector with a cloth clearance from walls and free flow of air or any other item. around the projector. - Do not place inflammables near the - Locations where temperatures may
Resumen del contenido incluido en la página 6
Safety Instructions (Continued) 17. Do not step on the projector or place Ceiling mounting the projector any objects upon it. Besides probable We want you to have a pleasant physical damage to the projector, doing experience using your BenQ projector, so may result in accidents and possible so we need to bring this safety matter injury. to your attention to prevent possible damage to person and property. If you intend to mount your projector on the ceiling, we strongly recommend that y
Resumen del contenido incluido en la página 7
Introduction Projector features The projector offers the following features • SmartEco™ starts your dynamic power saving The SmartEco™ technology offers a new way of operating the projector lamp system and saves lamp power depending on the content brightness level. • Longest lamp life with SmartEco™ technology The SmartEco™ technology lowers the power consumption and increases the lamp life. • ECO BLANK saves the lamp power Pressing the ECO BLANK button to hide the image and immediately lower
Resumen del contenido incluido en la página 8
Digital Projector Quick Start Guide Shipping contents Carefully unpack and verify that you have all of the items shown below. If any of these items are missing, please contact your place of purchase. Standard accessories The supplied accessories will be suitable for your region, and may differ from those illustrated. *The warranty card is only supplied in some specific regions. Please consult your dealer for detailed information. Projector Power cord VGA cable Quick start guide User manual C
Resumen del contenido incluido en la página 9
Projector exterior view 1. External control panel Front/upper side (See "Controls and functions" on page 10 for details.) 1 2. Lamp cover 2 3. Vent (heated air exhaust) 4. Quick-release button 3 5 5. Focus and Zoom ring 6 6. Vent (cool air intake) 7 4 7. Speaker grill 8. Front IR remote sensor 8 9. Projection lens 9 10. Lens cap 10 11. AC power jack 12. RS232 control port 13. USB Type-A port 14. USB Mini-B port 15. Rear IR remote sensor 16. HDMI-input port Rear/lower side 17. RGB signal output
Resumen del contenido incluido en la página 10
Controls and functions Projector 1 9 2 10 3 11 4 8 5 12 6 13 7 14 8 1. Focus ring 11. AUTO Adjusts the focus of the projected image. Automatically determines the best picture timings for the displayed image. 2. Zoom ring Adjusts the size of the image. 12. POWER 3. LAMP indicator light Toggles the projector between standby Indicates the status of the lamp. Lights up mode and on. or flashes when the lamp has developed a 13. Right/ problem. Increases the projector volume. 4. MENU/EXIT When the
Resumen del contenido incluido en la página 11
Remote control 10. Page Up/Page Down 1 Operate your display software program (on 2 7 a connected PC) which responds to page up/ 15 3 down commands (like Microsoft 16 4 PowerPoint). 5 11. Digital Zoom (+, -) 17 6 7 Magnifies or reduces the projected picture 18 8 size. 9 18 12. Timer On 10 19 11 Activates or displays an on-screen timer 20 based on your own timer setting. 21 12 13. Timer Set up 22 13 23 Enters presentation timer setting directly. 14 14. 3D settings Enters 3D settings directly.
Resumen del contenido incluido en la página 12
Approx. +30º Approx. +30º Remote control effective range The remote control must be held at an angle within 30 degrees perpendicular to the projector's IR remote control sensor(s) to function correctly. The distance between the remote control and the sensor(s) should not exceed 8 meters (~ 26 feet). Make sure that there are no obstacles between the remote control and the IR sensor(s) on the projector that might obstruct the infra-red beam. • Operating the projector from the front • Operating
Resumen del contenido incluido en la página 13
Positioning your projector Choosing a location Your projector is designed to be installed in one of four possible installation locations: 1. Front Table 3. Rear Ceiling Select this location with the projector Select this location with the projector placed on the table in front of the screen. suspended upside-down from the ceiling This is the most common way to position behind the screen. the projector for quick setup and Note that a special rear projection screen portability. and the BenQ P
Resumen del contenido incluido en la página 14
Obtaining a preferred projected image size The distance from the projector lens to the screen, the zoom setting, and the video format each factors in the projected image size. Projection dimensions Refer to "Dimensions" on page 57 for the center of lens dimensions of this projector before calculating the appropriate position. MS619ST/MX620ST 4:3 Screen diagonal Screen Center of lens H W Vertical offset Projection distance The screen aspect ratio is 4:3 and the projected picture is 4:3 Screen
Resumen del contenido incluido en la página 15
MW621ST 16:10 Screen diagonal Screen H Center of lens W Vertical offset Projection distance The screen aspect ratio is 16:10 and the projected picture is 16:10 Screen size Distance from screen (mm) Min Max Vertical Diagonal length length offset W H (mm) Average (mm) (mm) (max. (min. Inch mm zoom) zoom) 40 1016 862 538 625 688 750 13 60 1524 1292 808 938 1031 1125 20 80 2032 1723 1077 1250 1375 1500 27 100 2540 2154 1346 1563 1719 1875 34 120 3048 2585 1615 1875 2063 2250 40 140 3556 301
Resumen del contenido incluido en la página 16
Connection When connecting a signal source to the projector, be sure to: 1. Turn all equipment off before making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly inserted. • In the connections shown below, some cables may not be included with the projector (see "Shipping contents" on page 8). They are commercially available from electronics stores. • The connection illustrations below are for reference only. The rear connecting jacks available o
Resumen del contenido incluido en la página 17
• If you wish to use this connection method when the projector is in standby mode, make sure the Monitor Out function is turned on in the SYSTEM SETUP: Advanced menu. See "Standby Settings" on page 47 for details. Connecting video source devices You need only connect the projector to a video source device using just one of the connecting methods, however each provides a different level of video quality. The method you choose will most likely depend upon the availability of matching terminals
Resumen del contenido incluido en la página 18
Operation Starting up the projector 1. Plug the power cord into the projector and into a power outlet. Turn on the power outlet switch (where fitted). Check that the POWER indicator light on the projector lights orange after power has been applied. Please use the original accessories (e.g. power cord) only with the device to avoid possible dangers such as electric shock and fire. 2. Press POWER to start the projector. As soon as the lamp lights up, a "Power On Ring Tone" will be heard. Th
Resumen del contenido incluido en la página 19
Adjusting the projected image Adjusting the projection angle The projector is equipped with 1 quick-release adjuster foot and 1 rear adjuster foot. These adjusters change the image height and projection angle. To adjust the projector: 1. Press the quick-release button and lift the front of the projector. Once the image is positioned where you want it, release the quick-release button to lock the foot in position. 2. Screw the rear adjuster foot to fine-tune the 1 2 horizontal angle. To ret
Resumen del contenido incluido en la página 20
Correcting keystone Keystoning refers to the situation where the projected image is noticeably wider at either the top or bottom. It occurs when the projector is not perpendicular to the screen. To correct this, you will need to manually correct it following ONE of these steps. • Press / on the projector or remote control to display the Keystone correction page. Press to correct keystoning at the top of Press /. Press /. the image. Press to correct keystoning at the bottom of the image.
