Resumen del contenido incluido en la página 1
Important Maintenance &
Setup & Connections Operation Useful Features Appendix
Information Troubleshooting
XG-NV6XU/H(E) 99/5/7/18:00
OPERATION MANUAL
MODEL
-
XG NV6XU
LCD PROJECTOR
Resumen del contenido incluido en la página 2
Before using the LCD projector, please read this operation manual carefully. OPERATION MANUAL ENGLISH IMPORTANT For your assistance in reporting the loss or theft of your - Model No.: XG NV6XU Color LCD Projector, please record the Serial Number located on the bottom of the projector and retain this Serial No.: information. Before recycling the packaging, please be sure that you have checked the contents of the carton thoroughly against the list of “Supplied Accessories” on page 10. There are tw
Resumen del contenido incluido en la página 3
Important Information Important Safeguards Electrical energy can perform many useful functions. This product has been engineered and manufactured to ensure your personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order not to defeat the safeguards incorporated into this LCD Projector, observe the following basic rules for its installation, use and servicing. For your own protection and reliable usage of your LCD Projector, please be sure to read these “I
Resumen del contenido incluido en la página 4
Outstanding Features X 1. ADVANCED COMPATIBILITY WITH HIGH-END WORKSTATIONS AND PCS L H Compatible with up to 130 Hz vertical refresh rate, Sync on Green and Composite Sync signals for use with a wide variety of high-end PCs and Workstations. (Page 11) 2. FOR USE WITH DTV Allows projection of DTV images and 16:9 wide-screen images when connected to a DTV decoder or similar video systems. (Page 13) 3. BNC TERMINALS FOR COMPONENT AND RGB INPUT Equipped with BNC terminals for connection to a DTV de
Resumen del contenido incluido en la página 5
Important Maintenance & Setup & Connections Operation Useful Features Appendix Information Troubleshooting Contents Important Information Maintenance & Troubleshooting Air Filter Maintenance …………………………… 46 Important Safeguards …………………………… 2 Outstanding Features …………………………… 3 Lamp/Maintenance Indicators ………………… 47 Replacing the Projection Lamp ………………… 48 Contents …………………………………………… 4 Using the Kensington Lock …………………… 49 Usage Guidelines ………………………………… 5 Troubleshooting …………………………………… 49 How to Acc
Resumen del contenido incluido en la página 6
Usage Guidelines "COMPLIES WITH 21 CFR SUBCHAPTER J" SHARP ELECTRONICS CORPORATION Cautions Concerning the Laser Pointer CAUTION SHARP PLAZA, MAHWAH, NEW JERSEY 07430 TEL : 1-800-BE-SHARP U.S.A. ONLY LASER RADIATION- REMOTE CONTROL DO NOT STARE INTO BEAM The laser pointer on the remote control emits a laser beam from the laser MODEL NO. : RRMCG1518CESA WAVE LENGTH : 650nm DC3V (1.5VX2PCS.) MAX. OUTPUT : 1mW MADE IN CHINA pointer window. This is a Class II laser which may impair your sight if dir
Resumen del contenido incluido en la página 7
Important Information How to Access the PDF Operation Manuals (for Windows and Macintosh) PDF operation manuals in all languages are included in the CD-ROM. To utilize these manuals, you need to install Adobe Acrobat Reader on your PC (Windows or Macintosh). If you have not installed Acrobat Reader yet, you can download it from the Internet (http://www.adobe.com) or install it from the CD-ROM. To Install Acrobat Reader (English version) from the CD-ROM For Windows: For Macintosh: 1 Insert the CD
Resumen del contenido incluido en la página 8
Part Names Numbers next to the part names refer to the main pages in this manual where the topic is explained. Projector LAMP REPLACEMENT MUTE button 17 47 indicator TEMPERATURE WARNING POWER indicator 16 47 indicator POWER buttons (ON/OFF) 17 17 VOLUME buttons (`/1) LENS button 19 MENU button 23 INPUT button IrCOM button 17 25 FREEZE button AUTO SYNC button 33 29 RESIZE button ENLARGE button 34 36 UNDO button GAMMA button 19 35 ADJUSTMENT buttons ENTER button 23 23 (¶/Ä /§ / ©) Cooling fan (Exh
Resumen del contenido incluido en la página 9
Important Information Part Names Remote Control Front View Top View Remote control MUTE button 17 signal transmitter Laser POWER buttons pointer 5 17 17 VOLUME buttons (ON/OFF) window (`/1) 19 22 LENS/BLACK LASER POINTER/ SCREEN button MENU button 37 23 Rear View MOUSE/ 22 22 RIGHT-CLICK/ ADJUSTMENT ENTER button 23 23 buttons (¶/Ä /§/©) INPUT button IrCOM button 17 25 FREEZE button AUTO SYNC button 33 29 LEFT-CLICK/ 19 UNDO ENLARGE button RESIZE button 34 36 22 button TOOLS button GAMMA button 4
Resumen del contenido incluido en la página 10
Setup & Connections E-9 Setup & Connections
Resumen del contenido incluido en la página 11
Setup & Connections Setting up the Projector 1. Supplied Accessories Remote control RRMCG1518CESA Power cord Two AA size batteries QACCU5013CEZZ Computer audio cable Computer cable Three BNC-RCA adaptors QCNW-4870CEZZ QCNW-5304CEZZ QPLGJ0107GEZZ Mouse control Mouse control Mouse control cable serial cable cable for IBM PS/2 for Mac QCNW-5112CEZZ QCNW-5113CEZZ QCNW-5114CEZZ Remote mouse receiver DIN-D-sub RS-232C cable RUNTK0661CEZZ QCNW-5288CEZZ Extra air filter Lens cap PFILD0080CEZZ PCAPH1056C
Resumen del contenido incluido en la página 12
2. Connecting the Projector Connecting the Power Cord Plug the supplied power cord into the AC socket on the back of the projector. Power cord QACCU5013CEZZ Connecting the Projector to a Computer You can connect your projector to a computer for projection of full color computer images. Computer cable QCNW-5304CEZZ Computer audio cable QCNW-4870CEZZ CAUTION • Before connecting, be sure to turn both the projector and the computer off. After making all connections, turn the projector on first. The
Resumen del contenido incluido en la página 13
Setup & Connections 2. Connecting the Projector Continued • This projector uses a 5 BNC computer input to prevent a deterioration of image quality. • Connect the R (PR), G/G sync (Y), B (PB), HD (C sync) and VD cables to the correct input terminals on the projector and an RGB switcher (sold separately) connected to the computer, or connect a 5 BNC-VGA cable (sold separately) directly from the input terminals on the projector to the computer. Connecting other compatible computers Computer cable Q
Resumen del contenido incluido en la página 14
2. Connecting the Projector Continued Connecting the Projector to Video Equipment You can connect your projector to a VCR, laser disc player, DVD player, DTV decoder and other audiovisual equipment. CAUTION • Always turn off the projector while connecting to video equipment, in order to protect both the projector and the equipment being connected. Connecting a VCR, laser disc player and other audiovisual equipment The S-VIDEO INPUT terminal uses a video signal system in which the picture is sepa
Resumen del contenido incluido en la página 15
Setup & Connections 2. Connecting the Projector Continued Connecting an amplifier and other audio components CAUTION • Always turn off the projector while connecting to audio components, in order to protect both the projector and the components being connected. • By using external audio components, the volume can be amplified for better sound. To audio input terminals Audio cable (sold separately) Amplifier Connecting RS-232C Port When the RS-232C port on the projector is connected to a computer
Resumen del contenido incluido en la página 16
2. Connecting the Projector Continued Connecting the Remote Mouse Receiver • You can use the remote control as a remote mouse. • When the RS-232C port on the projector is connected to a computer with an RS-232C cable (cross type, sold separately), the computer can be used to control the projector and check the status of the projector. See pages 52 and 53 for details. IBM or IBM compatible PC 1 Connect one end of the supplied mouse control cable to the corresponding terminal on the PC. 2 Connect
Resumen del contenido incluido en la página 17
Operation Operation Basic Operations 1. Turning on/off the Power Make the necessary connections before proceeding. 1 Connect the power cord to a wall outlet. The POWER indicator lights up red and the projector enters standby mode. • If the bottom filter cover is not securely installed, the POWER indicator flashes. E-16
Resumen del contenido incluido en la página 18
1 Turning on/off the Power Continued 4 Press Power ON. 2 • The flashing green LAMP REPLACEMENT 5 indicator shows that the lamp is warming up. Wait until the indicator stops flashing before 2, 6 operating the projector. • If the power is turned off and then immediately turned on again, it may take a short while before 3 the lamp turns on. • After the projector is unpacked and turned on for the first time, a slight odor may be emitted from the exhaust vent. This odor will soon disappear with use.
Resumen del contenido incluido en la página 19
Operation 2. Setting up the Screen Position the projector perpendicular to the screen with all feet flat and level to achieve an optimal image. Move the projector forward or backward if the edges of the image are distorted. • The projector lens should be centered in the middle of the screen. If the lens center is not perpendicular to the screen, the image will be distorted, making viewing difficult. • Position the screen so that it is not in direct sunlight or room light. Light falling directly
Resumen del contenido incluido en la página 20
2. Settng up the Screen Continued Using the Adjustment Feet 1 2 3 Press foot releases. Adjust height of projector Rotate feet to make minor and remove hands from foot changes. releases. • The projector is adjustable up to approximately 5° from the standard position. • When the height of the projector is adjusted, the image may become distorted (keystoned), depending on the relative positions of the projector and the screen. CAUTION • Do not press the foot releases when the adjustment feet are ex
