Resumen del contenido incluido en la página 1
Projection Television
Operating Instructions
Model No. TX-43P400H
TX-51P400H
This is a combined Operating Instruction
manual for all the above series of models.
Please read these instructions before
operating your set and retain them for
future reference.
TQBC0533
Resumen del contenido incluido en la página 2
Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new Projection television set. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt also, and note down the Model Number and Serial Number of your set in the space provided on the rear cover of these Instructions. Visit our Panasonic Web Site
Resumen del contenido incluido en la página 3
Table of contents Table of contents Warnings and Cautions ................................................................. 4 Before Operating This Set ............................................................. 6 Safety Precaution / Securing the casters ............................................... 6 Connecting the Aerial Cable to the RF In Terminal ................................ 6 Connecting the Plug to the Wall Outlet................................................... 7 How to Turn the
Resumen del contenido incluido en la página 4
Warnings and Cautions Warnings Unplug the power cord in the DO NOT use this unit near event of any malfunction water. (Near a bath tub, etc.) (screen goes blank, no sound, odd sounds, smoke or unusual odors coming from the unit). Unplug the power cord if foreign matter or water falls into the unit, or if the unit is dropped or the cabinet is damaged. DO NOT place any of the DO NOT use if the power cord following on the unit: or power plug is damaged, or if Flower vases, flower pots,
Resumen del contenido incluido en la página 5
Warnings and Cautions Cautions DO NOT place in humid or DO NOT place in an unstable dusty location, or areas location. exposed to smoke or steam. DO NOT place in direct sunlight and other sources of direct heat. DO NOT stand, or place Place in a safe location. heavy objects on the unit. Particular care should be Fix the TV to a wall. taken by families with small (refer to page 8) children. When inserting batteries, Do not mix new and old ensure that the polarities batteries. Use only th
Resumen del contenido incluido en la página 6
Before Operating This Set Safety Precaution / Securing the casters Please take safety precautions to prevent the unit form To prevent the set from tipping forward, turn the two falling over. casters on the front of the TV so they face forward, as The unit may fall over during earthquakes, or if someone shown in the picture. stands on or shakes the TV. Fixing to a wall Use a strong rope or a chain to fasten the TV firmly to a strong support such as a wall or a pillar. Connecting
Resumen del contenido incluido en la página 7
Before Operating This Set Connecting the Plug to the Wall Outlet Note: The On/Off switch on this model does not full disconnect the TV from the mains supply. How to Turn the Power On Power Indicator Power OFF No light: Power OFF condition Note: Even when the Power Switch is "OFF", the TV set will still consume a small amount of power. Power Indicator Push the Power switch on Television to turn the set on. Power ON Power Indicator Power Switch No light: Normal viewing condition Red : Stand b
Resumen del contenido incluido en la página 8
Location of Controls Controls and Terminals on the TV AV3 IN S VIDEO VIDEO L/MONO R Main Sub. AUDIO STR F TV/AV MONITOR AV1 AV2 AV4 OUT IN IN IN DVD S VIDEO DVD [Y-PB-PR] [ ] Y-PB-PR VIDEO Y Y VIDEO MONO MONO PB MONO PB L L AUDIO PR AUDIO PR R R Item Function Refer to Item Function Refer to No. Page No. Page Main Headphones Jack 11 TV/AV Selection 12 Aerial Terminal (RF In Terminal) 6 Sub Headphones Jack 11 AV3 Input Terminals 9 Monitor Output Terminals 10 STR 12 AV1 Input Terminals 9
Resumen del contenido incluido en la página 9
Connections How to connect the “AV1, 2, 3 or 4” Input Terminals Connect VCRs and other peripheral equipment (VHS VCR) Audio Video OUT OUT R L AV1 IN MONITOR AV1 AV2 AV4 OUT IN IN IN S VIDEO DVD S VIDEO DVD [Y-PB-PR] [ ] Y-PB-PR VIDEO Y Y VIDEO VIDEO VIDEO MONO MONO MONO MONO PB PB L L L AUDIO AUDIO AUDIO AUDIO PR PR R R R (Super-VHS VCR) Audio Video S Video OUT OUT OUT R L AV1 IN MONITOR AV1 AV2 AV4 OUT IN IN IN S VIDEO DVD S VIDEO DVD [Y-PB-PR] [ ] Y-PB-PR VIDEO Y Y VIDEO VIDEO VIDEO MONO MONO
Resumen del contenido incluido en la página 10
Connections How to connect the DVD Input Terminals DVD Player Audio DVD(Y-PB-PR) OUT OUT R L PR PB Y MONITOR AV1 AV2 AV4 OUT IN IN IN DVD [ ] Y-PB-PR DVD DVD S VIDEO [ ] Y-PB-PR [Y-PB-PR] Y VIDEO Y Y VIDEO MONO PB MONO MONO MONO PB PB L L L AUDIO AUDIO PR PR AUDIO PR R R R Notes: • The AV4 audio signal is common for both AV4 and DVD input signal terminals. • The DVD signal input terminal takes priority over the AV4 video signal input terminal. • Similar connection are available at the COMPONE
Resumen del contenido incluido en la página 11
Connections Connecting Headphones Connect headphones as follows. AV3 IN S VIDEO VIDEO L/MONO R Main Sub. AUDIO (3.5mm Plug) (Optional) (not supplied) You can listen to sound from each of the headphones plugs as shown below. Speaker Main Sub Monitor Screen condition Sound Headphones Headphones Output A A A A Single picture/ A (Stereo) (Stereo) (Stereo) (Mono) Teletext A A B A Picture in Picture A (Stereo) (Stereo) (Mono) (Stereo) B A A B A Picture and Picture A B (Stereo) (Stereo) (Mono) (Stereo)
Resumen del contenido incluido en la página 12
General Operation TV/AV Selection Volume Adjustment Press to select TV, AV1, AV2, AV3 and TV/AV STR F AV4 input signal modes sequentially. Volume Up (+) / Programme Number Up ( ) Power switch Volume Down (-) / Programme Number Down ( ) STR Picture Menu (see page 14, 26) Used to store tuning and other function settings. Also used to Sound Menu (see page 14, 28) start the menu demonstration. Function selection Set up Menu (see page 15, 25) Displays the on screen display functions, use rep
Resumen del contenido incluido en la página 13
General Operation Note: Power (Stand-by) (see page 7) • It is also possible to turn the TV set on from The TV set must first be plugged into the wall STANDBY mode by pressing the “Direct outlet and turned on at the power switch. Programme Number Selection” Buttons (0-9) and Press this button to turn the TV set On from the “Programme Number Up or Down” Button, V Volume Adjustment olume Adjustment Standby mode, Press it again to turn the TV either on the set or on the Remote Control. se
Resumen del contenido incluido en la página 14
On-Screen menu Display from Remote Control To PICTURE adjust menu (see page 26) PICTURE PICTURE MENU STANDARD SOUND CONTRAST BRIGHTNESS SET UP COLOUR SHARPNESS TV/AV NTSC-TINT C. TEMP STANDARD PICTURE P-NR AUTO AI ON TV/TEXT INDEX HOLD F.P . SCAN MODE AUTO 100Hz/ CH SEARCH STILL PROGRE 1 2 3 SURROUND To SOUND adjust menu 45 6 (see page 28) MULTI PIP SOUND 78 9 MENU DYNAMIC VOLUME BASS 0 TREBLE BALANCE HEADPHONE VOL. SUB HEADPHONE SURROUND OFF LD/DVD REC-VCR To HELP MENU N HELP MENU A B
Resumen del contenido incluido en la página 15
On-Screen menu Display from Remote Control To SETUP MENU (see page 27) SETUP MENU TELETEXT TOP To TUNING MENU OFF TIMER OFF Press to access to TUNING MENU (see page 19) FLICKER REDUC. DYNAMIC STROBE TUNING MENU CH COLOUR SET SYS SELECT AUSTRALIA VCR / GAME OFF AUTO TUNE TEXT SELECT ENGLISH MANUAL TUNE SETUP MENU SOUND SYS 5. 5 MHz CHILD LOCK OFF COLOUR SYS AUTO PICTURE SHIFT OFF FINE TUNE TUNING MENU ACCESS SKIP OFF CONVERGENCE LANGUAGE ENGLISH SETUP MENU To CONVERGENCE TELETEXT
Resumen del contenido incluido en la página 16
Convergence Adjustment Convergence Adjustment mode Prior to adjustment, tune the broadcast signal to the video input signal and operate the set for more than 60 minutes. If the location or direction of the set is changed or moved, the display may be out of alignment. If necessary, carry out the following procedures once with PAL signal and again with the NTSC signal. Vertical centre marker Horizontal centre marker 1 SET UP Press to display the Setup Menu. SETUP MENU CHILD LOCK OFF PICTURE SHI
Resumen del contenido incluido en la página 17
Convergence Adjustment Convergence1 Adjustment for RED, BLUE and GREEN RED Press to align the horizontal red line with CONVERGENCE the horizontal blue line. (Becomes a white line) Press to align the vertical red line with the vertical blue line. RED (Becomes a white line) ADJUST ADJUST TV / AV -EXIT Press N button to adjust the blue mode. N-BLUE (Stores RED) BLUE Press to align the horizontal blue line with CONVERGENCE the horizontal yellow line. (Becomes a white line) Press to align the vertic
Resumen del contenido incluido en la página 18
Convergence Adjustment Convergence2 Adjustment for RED and BLUE This function adjust the convergence of the side part of the screen. Press to select the CONVERGENCE2. SELECT ACCESS Press to access to the function. RETURN TV / AV - EXIT CONVERGENCE 1 CONVERGENCE 2 ACCESS Press the Number button on the Remote Control to TV/TEXT F.P . INDEX HOLD select the position which you would like to adjust. 100Hz/ CH SEARCH STILL PROGRE 1 2 3 (Example) Position 1 is selectd. SURROUND 4 5 6 MULTI 1 2
Resumen del contenido incluido en la página 19
Tuning Channels SETUP MENU 1 Display the TUNING MENU TOP TELETEXT OFF TIMER OFF SET UP 1 FLICKER REDUC. DYNAMIC STROBE Press to display the CH COLOUR SET SETUP MENU SETUP MENU. VCR / GAME OFF CHILD LOCK OFF TEXT SELECT ENGLISH 2 PICTURE SHIFT OFF Press to select the TUNING MENU ACCESS CONVERGENCE TUNING MENU. LANGUAGE ENGLISH Press to display the TUNING MENU. Regional System Selection 2 SYS SELECT (Before AUTO tuning and MANUAL tuning, set the “SYS SELECT” mode, as detailed below.)
Resumen del contenido incluido en la página 20
Tuning Channels Automatic Tune This TV uses automatic tuning to determine whether or not the TV can receive a broadcast signal which is being sent. Before Automatic Tune, Regional System must already be set (Refer to pages 19). AUTO TUNE 1 Press to select the “AUTO TUNE”. TUNING MENU SYS SELECT AUSTRALIA Press to access to the “AUTO TUNE”. AUTO TUNE ACCESS MANUAL TUNE Search Start. SOUND SYS 5. 5 MHz COLOUR SYS AUTO 29 CH 29 FINE TUNE SKIP OFF AUTO SETUP IN PROGRESS SEARCHING : PLESE W
