Resumen del contenido incluido en la página 1
MULTIMEDIA PROJECTOR
MODEL EIP-S200
OWNER’S MANUAL
Resumen del contenido incluido en la página 2
Federal Communication Commission Notice Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Howev
Resumen del contenido incluido en la página 3
Safety Instructions Read all of these instructions before you operate your projector and save for future reference. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORT
Resumen del contenido incluido en la página 4
1. Check that the operating voltage of your unit is identical with the voltage of your local power supply. 2. Should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by the qualified personnel before operating it further. 3. Do not attempt to service this product yourself, as opening or removing covers may damage the components inside and will void your warranty. 4. Do not place this product on an unstable cart, stand, or table. The product may fall, causing
Resumen del contenido incluido en la página 5
14. The projector is equipped with ventilation holes (intake) and ventilation holes (exhaust). Do not block or place anything near these slots, or internal heat build-up may occur, causing picture degradation or damage to the projector. 15. When you replace the projector lamp, never touch the new bulb with your bare hands. The invisible residue left by the oil on your hands may shorten the bulb life. Use lint-free gloves or finger cots are recommended. 16. The product should be situated away fro
Resumen del contenido incluido en la página 6
Notes on AC Power Cord AC Power Cord must meet requirement of country where you use a projector. Confirm an AC plug type with graphics below and proper AC Power Cord must be used. If supplied AC Power Cord does not match your AC outlet, contact your sales dealer. This projector is equipped with a grounding type AC line plug. Make sure that your outlet fits the plug. Do not defeat the safety purpose of this grounding type plug. We highly recommend using a video source device also equipped with a
Resumen del contenido incluido en la página 7
CONTENTS CONTENTS CONTENTS CONTENTS CONTENTS Introduction ........................................................................................................... 7 Projector Features ............................................................................................. 7 Package Contents .............................................................................................. 8 Projector Overview ....................................................................................
Resumen del contenido incluido en la página 8
Introduction Projector Features The projector integrates high-performance optical engine projection and a user-friendly design to deliver high reliability and ease of use. The projector offers the following features: ® Single chip 0.55" Texas Instruments DLP technology SVGA (800 x 600 pixels) true resolution 1.07x manual zoom lens Auto image re-sizing (Auto-Sync.) to 800 x 600 full screen with scaling compression compatibility for VGA, SVGA, XGA* and SXGA* ® Compatibility with Macintosh computer
Resumen del contenido incluido en la página 9
Package Contents When you unpack the projector, make sure you have all these components: Projector with Lens Cap AC Power Cord VGA Cable (D-Sub to D-Sub) Composite Video Cable S-Video Cable Audio Cable Remote Control (IR) Owner’s Manual Quick Start Guide Projector Carrying with Lithium battery Case Save the original shipping carton and packing material; they will come in handy if you ever to ship your unit. For maximum protection, repack your unit as it was originally packed at the factory. EN-8
Resumen del contenido incluido en la página 10
Projector Overview Front View 9 8 7 1 2 3 4 5 6 1 1 Ventilation holes 6 Elevator button 2 Projection lens 7 Zoom ring 3 Front IR remote control sensor 8 Focus ring 4 Lens cap 9 Control panel 5 Elevator foot EN-9
Resumen del contenido incluido en la página 11
Rear View 1 Rear IR remote control sensor 2 Ventilation holes 3 Terminals 4 Elevator button 5 Elevator foot 6 Speaker 1 2 3 2 7 AC power socket 8 Kensington lock 8 7 6 5 4 Bottom View 1 Lamp cover 2 Ceiling mount 2 2 2 1 This projector can be used with a ceiling mount for support. The ceiling mount is not included in the package. EN-10
Resumen del contenido incluido en la página 12
Using the Product Control Panel 1 2 LED 1 Lamp LED indicator Refer to “LED Indicator Messages”. (p.30) 3 2 Power LED indicator Refer to “LED Indicator Messages”. (p.30) 8 4 5 7 6 Button Function 3 Power Refer to “Powering On/Off the Projector”. 4 Keystone / Adjusts image distortion caused by tilting the projector. 5 Auto Automatically adjusts frequency, total dots. This function is available for computer mode only. 6 Menu Displays or exits the on-screen display menus. 7 S
Resumen del contenido incluido en la página 13
Terminals 1 2 3 4 5 6 1 SERIAL When operating the projector via a computer, connect this to the controlling computer’s RS-232C port. 2 USB(COMPUTER) This connector is for firmware update. 3 COMPUTER IN Connects image input signal (analog) to this jack. 4 S-VIDEO Connects S-Video output from video equipment to this jack. 5 VIDEO Connects composite video output from video equipment to this jack. 6 AUDIO IN Connects an audio output from video equipment to this jack. EN-12
Resumen del contenido incluido en la página 14
Remote Control 1 Power Refer to “Powering On/Off the Projector”. (p. 17) 2 Four directional buttons Use four directional buttons to select items or make adjustments to your selection. (p. 22) 3 Menu Displays or exits the on-screen display menus. (p. 22) 4 Enter To select the desired setting. (p. 25) 5 Keystone / Adjusts image distortion caused by tilting the projector. (p. 11, 23) 6 Volume / Press the Volume button to increase the volume press the Volume button to reduce the volume.
Resumen del contenido incluido en la página 15
For the first time use: Remove the transparent insulation tape by pulling it before use. Catch Battery holder For battery change: 1. Push the catch to the right and remove the battery holder. 2. Remove the old Lithium coin cell and install new one (CR2025). Ensure that the side with the mark “+” is up. 3. Push the battery holder back into the remote control until you feel a click. Keep the battery out of the reach of children. There is a danger of death by accidentally swallowing the battery. Do
Resumen del contenido incluido en la página 16
Remote Control Operation Point the remote control at the infrared remote sensor and press a button. Operating the projector from the front Operating the projector from the rear The remote control may not operate when there is sunlight or other strong light such as a fluorescent lamp shining on the remote sensor. Operate the remote control from a position where the remote sensor is visible. Do not drop the remote control or jolt it. Keep the remote control out of locations with excessively hi
Resumen del contenido incluido en la página 17
Installation Connecting the Projector 1 RS232 Cable 5 Composite Video Cable 2 USB Cable 6 S-Video Cable 3 VGA Cable (D-Sub to D-Sub) 7 VGA (D-Sub) to HDTV (RCA) Cable 4 Audio Cable Laptop type Desktop type 1 2 3 7 6 5 4 When connecting cable, power cords of both a projector and external equipment should be disconnected from AC outlet. The figure above is a sample connection. This does not mean that all of these devices can or must be connected simultaneously. The cables that come with the pr
Resumen del contenido incluido en la página 18
Powering On/Off the Projector Powering on the projector: 1. Remove the projector lens cap. 2. Complete the AC power cord and peripheral signal cable(s) connections. 3. The Power LED blinks Green in standby mode. 4. Press button on the control panel or remote control to turn on the projector. The Power LED lights on Amber and Lamp LED lights on Green when the lamp is on. 5. Turn on your source (computer, notebook, DVD, etc.). The projector automatically detects your source. When searching messa
Resumen del contenido incluido en la página 19
Adjusting the Projected Image Adjusting the Projector Height Elevator button Elevator foot The projector is equipped with an elevator foot to adjust the image height. To raise the image: 1. Press the elevator button. 2. Raise the image to the desired height angle, then release the button to lock the elevator foot into position. To lower the image: 1. Press the elevator button. 2. Lower the image, then release the button to lock the elevator foot into position. To avoid damaging the projector, ma
Resumen del contenido incluido en la página 20
Adjusting the Projector Zoom and Focus Zoom ring Focus ring 1. Focus the image by rotating the focus ring. A still image is recommended for focusing. 2. Adjust the image by rotating the zoom ring. Rotate to the right to reduce the image. Rotate to the left to enlarge the image. EN-19
