Resumen del contenido incluido en la página 1
CX208
Desktop Label Printer
USER
GUIDE
Resumen del contenido incluido en la página 2
BAR CODE SATO ELECTRONICS (S) PTE LTD 438A Alexandra Road #02-01/04 Alexandra Technopark Singapore 119967 Tel: (65) 271 5300 Fax: (65) 273 6011 Service Hotline: (65) 273 6455 http://www.satosingapore.com © Copyright 2001 BAR CODE SATO ELECTRONICS (S) PTE LTD Warning: This equipment has been tested and found to comply with the lim- its for a Class B computing device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a
Resumen del contenido incluido en la página 3
BAR CODE SATO ELECTRONICS (S) PTE LTD 438A Alexandra Road #02-01/04 Alexandra Technopark Singapore 119967
Resumen del contenido incluido en la página 4
CX208 User Guide Table of Contents WhatYouGet ...............................1 Controls, Indicators, and Connections.................. 2 Printer Power Connection.....................2 Printer Interface Connection....................4 Setup ...................................4 Loading Labels or Tags......................4 Loading Ribbon..........................6 Sensor Calibration.........................8 Selecting the Label Sensor Type..................8 Using the Printer.....................
Resumen del contenido incluido en la página 5
CX208 User Guide What You Get The SATO CX208 Printers come complete and ready to install and print labels. Your CX208 shipping carton contains the following items: CX208 Printer • Parallel Printer Cable • 40 Watt Power Supply (80 Watt Supply optional) • Stack of label • Thermal Transfer Ribbon (not supplied with the CX208DT) • User’s Guide • CD-ROM Containing: • Label Wizard CX Label Design and Production Software Label Wizard CX Manual Files CX208 User’s Guide CX208 Programming Reference Guide
Resumen del contenido incluido en la página 6
CX208 User Guide Controls, Indicators, and Connections $ ! $ * - & Printer Power Connection 1. Plug the output of the AC power supply provided with the printer into the connec- tor on the bottom panel. 2. Connect the supply into an AC outlet having the proper voltage. Note : CX208 printers consume very little power when idle, so are not equipped with a power s witch. Pressing the READY ind
Resumen del contenido incluido en la página 7
CX208 User Guide Printer Interface Connection 1. Connect the supplied interface cable to the parallel printer port on the computer. 2. Connect the other end to the parallel input port on the printer. ! Page 3 # " % $ # " ’ ( ! &
Resumen del contenido incluido en la página 8
CX208 User Guide Media Loading Print Head Paper Guide Lock Sensor Light Source Drive Platen Media Roll Centre Justified Paper Guides Print Head Release Label Exit Slot Labels Page 4
Resumen del contenido incluido en la página 9
CX208 User Guide Setup Loading Labels or Tags 1. Lift the top cover. 2. Press the two print head releases back to unlock the print head. 3. Unwrap the new media, and unwind a few labels from the roll. La- bels should be wound face-in for the best results. 4. Slide the centre justified Paper Guides apart until the label roll will drop down between them. 5. Place media roll in the paper tray such that the media unwinds from the bottom of the roll toward the front of the printer. The label imag- in
Resumen del contenido incluido en la página 10
CX208 User Guide Ribbon Loading Page 6
Resumen del contenido incluido en la página 11
CX208 User Guide 6. Place the take-up core (ribbon unrolling from the top side) into the left take-up spindle. The take-up spindles are the top set of spindles. 7. Pull out the spring loaded knob on the right take-up spindle and place the right end of the take-up core into the right spindle, lining up the notches with the spindle nibs. 8. Pull the ribbon down and over the print head and insert the supply core onto the left supply spindle, making sure the notches in the core fit over the nibs. 9.
Resumen del contenido incluido en la página 12
CX208 User Guide mands that try to set it to the ThermalTTransfer mode. A CX208TT unit is calibrated at the factory for use with SATO Stan- dard ribbon and media. Other ribbon/media combinations may or may not index properly with these settings. If you are experiencing difficulty with la- bel indexing and are not using SATO labels and/or ribbon, it may be neces- sary to recalibrate the unit for your particular ribbon/media. This can be done by selecting the Calibration buttons provided in the L
Resumen del contenido incluido en la página 13
CX208 User Guide Using the Printer Printing a Self-test Label Printing a self-test label checks the printer’s overall operability. To run a self-test, confirm that the printer is loaded and connected to AC power and no print jobs are in process. Then: 1. Press and hold in the READY Indicator. 2. Press and release the FEED button. 3. The printer should begin printing a self-test label. Release the READY indicator after printing starts. 4. After the self-test label finishes printing, press the REA
Resumen del contenido incluido en la página 14
CX208 User Guide stop any printing. • delete the label format in process from memory. • reset the printer communication ports. • return all printer parameters to their default (first power-on) state. • Pressing the READY indicator a second time will return the printer to On- Line mode (its default condition). Resetting the printer in this manner does not harm it in any way, nor does it affect the contents of nonvolatile RAM or remove any stored objects. The effect is the same as if you had unplu
Resumen del contenido incluido en la página 15
CX208 User Guide Routine Maintenance SATO Singapore printers need very little maintenance other than occasional cleaning. Clean the printer body as required, using soft cloth moistened with a mild detergent cleaner. Clean the print head if it appears dirty or if print quality is poor. Print head cleaning is easy and fast: 1. Unlatch and raise the print head if it is not already raised and latch it in the open position. 2. Using a SATO Direct Thermal Print Head Cleaning Sheet or a soft cotton she
Resumen del contenido incluido en la página 16
CX208 User Guide What To Do If... SATO printers are very reliable, so printing problems are unlikely. If you do think you have a printer problem, proceed as follows: 1. Confirm that the printer has the right media installed, and that it is loaded correctly. See page 4 for media loading instructions. 2. Confirm that the printer is connected to its power supply and the sup- ply is plugged into an AC outlet having the proper voltage. 3. Open the print head and inspect the media path. Remove any obs
Resumen del contenido incluido en la página 17
CX208 User Guide 4. If you have been printing many labels, the printer may have over- heated. Normal operation will resume after the printer has cooled suf- ficiently. Self-test label will not print 1. If printing in the direct thermal mode, confirm that you have loaded direct thermal media. 2. Disconnect the cable between the printer and the host computer. Reset the printer and try to print a self-test label again. Labels will not feed 1. Confirm that the print media is loaded correctly. 2. Res
Resumen del contenido incluido en la página 18
CX208 User Guide Labels feed continuously 1. Check that the print media is loaded correctly. 2. Confirm that the sensor type (Eye-Mark or gap) in your software setup matches your print media. Poor print quality 1. Confirm that the print media is properly loaded, and there is no side- to-side motion of the paper as it feeds through the printer. 2. Check your software’s print darkness and print speed settings. These settings may need adjustment for optimum results. 3. Try different print media. Ol
Resumen del contenido incluido en la página 19
CX208 User Guide SPECIFICATIONS CX208 TT CX208 DT Print Method Thermal Transfer / Direct Thermal Direct Thermal Max Ribbon Length 459 ft -- N.A -- Max Ribbon Roll Diameter 42.4mm (1.67”) -- N.A -- Carbon Ribbon Inner : 12.7mm (0.5”) -- N.A -- Core Diameter Outer : 19mm (0.75”) Weight 2.68Kg (5.9Ib.) 2.64Kg (5.8lb.) Common Specifications Print Head Density 8 dots/mm (203dpi) Print Speed 38mm/sec (1.5") or 50mm/sec (2”) or 76mm/sec (3”), Selectable Media Continuous Paper, Paper Labels, Vi
Resumen del contenido incluido en la página 20
CX208 User Guide Communication Ports CX208 printers are equipped with a standard (not EPP or ECP) Cen- tronics parallel and an RS232C communication port, wired as shown below. Serial Input Connector (DB9S) # Parallel Input Connector (Centronics 36 pin) " . Standard Printer Cables The following standard cables are available for CX208 printers: 0 0 2 . 0 Serial Port Parameters CX208 printers are configured as Data Terminal Equi
