Resumen del contenido incluido en la página 1
Model C3600 Network Features
Support Protocols Printing Via
NetBEUI FTP
TCP/IP IPP
IPv6 Oki LPR
NetBEUI
RAW (Port 9100)
Network Configuration
Web Services on Devices (WSD)
AdminManager
DHCP/BOOTP
Security
DNS
E-mail Alert E-mail Domain Filter
E-mail Transmission IP Filtering
HTTP Mac Address Filtering
Rendezvous/Bonjour Protocols On/Off
SNMP Trap
SNMPv1
SNMPv3
SMTP
TELNET
Universal Plug and Play
Windows Rally
WINS
59309401 my.okidata.com
Resumen del contenido incluido en la página 2
Copyright information Copyright © 2008 Oki Data Americas, Inc. All rights reserved. Network Users Guide P/N 59309401 Revision 1.0 Disclaimer_________________________________ Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. The manufacturer assumes no responsibility for the results of errors beyond its control. The manufacturer also cannot guarantee that changes in software and equipment made by other manufacturers and referre
Resumen del contenido incluido en la página 3
Notes, Cautions, etc. Illustrations and components are representative only. Your unit may differ slightly from those pictured in this document. NOTE A note appears like this. A note provides additional information to supplement the main text which helps you to use and understand the product. Important! An important message appears like this. An important message provides supplemental information which can prevent potential problems. CAUTION! A caution appears li
Resumen del contenido incluido en la página 4
Contents Notes, Cautions, etc. . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Network Configuration Overview . . . . . . . . . . . . . . . . 7 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Printing the Network Configuration Report . . . . . . . . . . . . 9 Configuration utilities . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Network Configuration using AdminManager
Resumen del contenido incluido en la página 5
Installing Print SuperVision . . . . . . . . . . . . . . . . . . . . . . .50 Uninstalling PrintSuperVision. . . . . . . . . . . . . . . . . . . . . .51 Network Configuration using the Oki LPR Utility . . .52 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . .52 Installing the Oki LPR utility . . . . . . . . . . . . . . . . . . . . . .52 Uninstalling the Oki LPR Utility . . . . . . . . . . . . . . . . . . . .53 Network Printing using Microsoft Windows . . . . . . .55 Overview
Resumen del contenido incluido en la página 6
Tiger (10.4). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76 Bonjour, AppleTalk or USB . . . . . . . . . . . . . . . . . . . .76 TCP/IP Connection . . . . . . . . . . . . . . . . . . . . . . . . .77 Panther (10.3) and Jaguar (10.2). . . . . . . . . . . . . . . . .78 Rendezvous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78 IP Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79 AppleTalk connection. . . . . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 7
Network Configuration Overview Introduction NOTE Not all utilities, features or protocols are supported by every product. See the front cover of this manual for a listing of the items supported by your product. Your unit incorporates a fast 100BASE-TX/10BASE-T network interface. This Users Guide explains the functionality of the built in network interface and details the network interface specifications and several software utilities.* Network Users Guide 7
Resumen del contenido incluido en la página 8
Specifications NOTE Not all utilities, features or protocols are supported by every product. See the front cover of this manual for a listing of the items supported by your product. Frame Types IEEE 802.2 IEEE 802.3 Ethernet-II, SNAP, AUTO Network Interface 100BASE-TX 10BASE-T Network Protocols TCP/IP V4, V6 IEEE 802.1x Network layer: ARP, RARP, IP, ICMP Session layer: TCP, UDP Application layer:LPR, FTP, TELNET, HTTP, IPP, BOOTP, DHCP, SNMP, DNS, SMTP, POP3, SLP, Bonjou
Resumen del contenido incluido en la página 9
Printing the Network Configuration Report __________________________ To print the Network Configuration report from most units: NOTE If these steps do not work with your unit, check your Setup Guide or the On-line Users Guide (on the CD supplied with the unit) for instructions. 1. Press the ENTER button on your printer to display INFORMATION MENU on the LCD. 2. Press ENTER to select the menu. 3. Press the DOWN ARROW until NETWORK MENU is displayed on the LCD. 4. Press ENTER to print. Keep
Resumen del contenido incluido en la página 10
Configuration utilities NOTE Not all utilities, features or protocols are supported by every product. See the front cover of this manual for a listing of the items supported by your product. You can configure the network interface (NIC) by using one of the following methods: System Utility Features Requirements Admin Configure the NIC easily and Windows XP/Vista Manager simply without installing any (TCP/IP protocol or Quick Setup software packages into your IPX/SPX protocol (see system
Resumen del contenido incluido en la página 11
System Utility Features Requirements Web Browser Configure the NIC and Microsoft Internet (see printer by using a Web Explorer or similar. page 42) browser such as Microsoft Operating system Internet browser or that supports Web Netscape Navigator. browser. TELNET (see Configure the NIC using Third-party vendor page 43) TELNET. developed TELNET client package. A TELNET Application is standard in Windows/UNIX/ Linux. SNMP (see The printer and network Third-party vendor page 46) interfa
Resumen del contenido incluido en la página 12
Network Configuration using AdminManager AdminManager Quick Setup NOTE Not all utilities, features or protocols are supported by every product. See the front cover of this manual for a listing of the items supported by your product. The AdminManager Quick Setup utility allows you to configure the network interface easily and simply without installing any software packages. You can configure the following: Enable/disable TCP/IP, NetWare, EtherTalk, and NetBEUI protocols. Set IP addre
Resumen del contenido incluido en la página 13
1. Insert the CD into the CD-ROM drive. The Setup Utility starts automatically. If it does not start, double-click \setup.exe (in the root directory) on the CD. 2. Select the appropriate language and follow the on-screen instructions. 3. Accept the Software License Agreement. 4. Select the Optional Utilities tab. 5. Then select Install Admin Manager. 6. Select Oki Device Quick Setup and follow the on-screen instructions. 6 7. When the settings are correct, click Execute. The new settings ar
Resumen del contenido incluido en la página 14
9. Switch the printer off for 15 seconds and on again. AdminManager Standard Setup NOTE Not all utilities, features or protocols are supported by every product. See the front cover of this manual for a listing of the items supported by your product. AdminManager is a powerful Microsoft Windows-based utility to configure all network interface functions easily and intuitively via a graphical user interface. Configuration requires a PC with Windows XP /2000 Advanced Server or Vista, running
Resumen del contenido incluido en la página 15
2. Select the appropriate language and follow the on-screen instructions. 3. Accept the Software License Agreement. 4. Select the Optional Utilities tab. 5. Then select Install Admin Manager. 6. Select Oki Device Standard Setup and follow the on-screen instructions. 6 7. If you want to install AdminManager on to your local drive, select Install and Execute. Otherwise, select Execute from CD-ROM. Follow the on-screen instructions. 8. To run AdminManager, check Yes for Do you wish to execut
Resumen del contenido incluido en la página 16
Interface Select Start > Programs > Oki Setup Utility > Admin Manager. Menu Item Function File Search Search printers in your network and list all printers. Status Printer Current printer status is Status displayed: System Displays current NIC Status configuration. Configuration data can be saved as log file. List of Displays current NIC Configurat configuration. ion Items Configuration data can be saved as log file. Network Users Guide 16
Resumen del contenido incluido en la página 17
Menu Item Function Setup Oki Configure the network interface (NIC). Device Setup Setup by Launch the default browser in your HTTP environment to access the selected printers web page. Setup by Launch TELNET application in your TELNET environment to access the selected printers TELNET port. Setup Create Create a NetWare queue. NetWare Note: Only visible when using Netware Queue Delete Delete NetWare object. NetWare Note: Only visible when using Netware Object Reset Reset the selected net
Resumen del contenido incluido en la página 18
Device setup NOTE Not all utilities, features or protocols are supported by every product. See the front cover of this manual for a listing of the items supported by your product. Device Setup allows you to configure the network interface. Type the root password (default value is the last 6 characters of the MAC address) to configure. Remember that the root password is case sensitive. If the MAC address contains any alpha characters, type them as upper case. Device Setup contains details
Resumen del contenido incluido en la página 19
General Tab This allows you to set or change the root password used for Admin Manager, TELNET and FTP. Item Explanation Change root You can set/change the root password for password AdminManager, TELNET and FTP. Network Users Guide 19
Resumen del contenido incluido en la página 20
TCP/IP Tab This allows you to configure TCP/IP related items Item Explanation Use Set TCP/IP protocol as enabled/disabled. TCP/IP Use DHCP/BOOTP Check this item if IP address, Protocol subnet mask, default gateway and IP addresses for DNS primary server and secondary servers are retrieved from the DHCP or BOOTP server. Otherwise, uncheck. Use IPv6 Enables IPv6. IP Address Set the IP address of the selected network interface. Subnet Mask Set the subnet mask of the selected network inte