Resumen del contenido incluido en la página 1
DIGITAL COLOR PRINTER
MODEL
CP9500DW
OPERATION MANUAL
POWER ALARM PAPER/INK RIBBON DATA READY COOLING
DOOR OPEN CANCEL FEED&CUT
THIS OPERATION MANUAL IS IMPORTANT
TO YOU.
PLEASE READ IT BEFORE USING YOUR
DIGITAL COLOR PRINTER.
This digital color printer complies with the requirements and other relevant
provisions of the EC Directive 89/336/EEC, 73/23/EEC, 93/68/EEC and 1999/
5/EC.
The electro-magnetic susceptibility has been chosen at a level that gains
proper operation in residential areas, o
Resumen del contenido incluido en la página 2
INFORMATION This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING: Use the included AC power cord so as not to interfere with radio and television reception. If you use other cables, it may cause interference with radio and television reception. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE
Resumen del contenido incluido en la página 3
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio f
Resumen del contenido incluido en la página 4
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS CONTENTS SHOOTING CONTENTS CONTENTS Contents ................................................................................................ 1 Safety precautions ................................................................................ 2-4 Special features .................................................................................... 5 Unpacking .............................................................................
Resumen del contenido incluido en la página 5
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS CONTENTS SHOOTING SAFETY PRECAUTIONS In the interest of safety, please observe the following precautions: POWER REQUIREMENT This Digital Color Printer is designed to operate on 120V AC 50/60Hz in U.S.A. and Canada, 220V-240V AC 50/60Hz in Europe. Never connect to any outlet or power supply having a different voltage or frequency. WARNING : THIS APPARATUS MUST BE EARTHED. AVERTISSEMENT: CET APPAREIL DOIT ETRE MIS A LA TERRE. PROTECTIVE
Resumen del contenido incluido en la página 6
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS CONTENTS SHOOTING SAFETY PRECAUTIONS REMOVE THE PAPER STRIP BIN WHEN OPENING OR CLOSING THE DOOR When you open or close the door with the paper strip bin installed, the bin may be removed and fall. This may cause injury or damge. INSTALLATION LOCATIONS MAINTAIN GOOD VENTILATION Ventilation slots and holes are provided on the rear and both sides of this unit. Place the unit on a hard and level surface and locate at least 10cm (4 inches
Resumen del contenido incluido en la página 7
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS CONTENTS SHOOTING SAFETY PRECAUTIONS OTHER CAUTIONS • Do not pull out nor touch the print paper until printing is completed. It may degrade the print quality or cause an error. • Dust or other foreign matter adhering to the print paper or the ink cassette, or deformation resulting from exposure to extremely low or high temperatures could cause loss of color, uneven color or lines, or wrinkles in the print images. NOTE: YOUR UNDERSTANDI
Resumen del contenido incluido en la página 8
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS CONTENTS SHOOTING SPECIAL FEATURES SPECIAL FEATURES 5 PRINT SIZES ARE AVAILABLE DEPENDING ON THE PURPOSE 5 printing sizes, 9x13 (3.5x5”) (max.89 x 127 mm), 10x15 (4x6”) (max.102 x 152 mm), 13x18 (5x7”) (max.127 x 178 mm), 15x20 (6x8”) (max.152 x 203 mm) and 15x23 (6x9”) (max.152 x 229 mm), are selectable. HIGH SPEED PRINTING Normal printing speed is approx. 20 seconds (in 9x13 (3.5x5”) Fine mode print). Use of roll paper shortens the t
Resumen del contenido incluido en la página 9
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS CONTENTS SHOOTING UNPACKING UNPACKING Take the printer out of the box by the following procedures. Make sure to check the accessories. 11111Open the top of the box. 22222Remove the accessories together with upper cushions. 33333Hold the handles of the cardboard and pull it up carefully to take the printer together with the lower cushions out of the box. Make sure to pull the cardboard straight up. NOTE This printer is about 17 kg in we
Resumen del contenido incluido en la página 10
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS CONTENTS SHOOTING FEATURES & FUNCTIONS FRONT PANEL 6 7 8 9 10 11 PAPER STRIP BIN Hook the paper strip bin by its latches. 5 POWER ALARM PAPER/INK RIBBON DATA READY COOLING 12 DOOR OPEN CANCEL FEED&CUT A B 4 13 3 2 14 1 2 To attach: A -> B To remove: B -> A 1 1 1 1 1 POWER BUTTON 9 9 9 9 9DATA INDICATOR Use to switch the power ON and OFF. This indicator blinks during data transfer. It illuminates Press to turn on power. Press again to
Resumen del contenido incluido en la página 11
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS CONTENTS SHOOTING FEATURES & FUNCTIONS SIDE AND REAR PANEL 1 4 3 2 3 5 5 AC LINE 6 (LEFT SIDE) (REAR) 1 1 1 1 1 USB TERMINAL 4 4 4 4 4 DIP SWITCHES Use to connect the USB cable. Use to set various functions of this unit. See page 11. For setting, see page 10. 5 5 5 5 5 HANDLE FOR TRANSPORTING 2 2 2 2 2 SCSI ID SWITCH When transporting this unit, hold this handle and the lower Use to set the SCSI ID number of the connected device. fron
Resumen del contenido incluido en la página 12
1 TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS CONTENTS SHOOTING 0 7 CONNECTIONS CONNECTION WITH SCSI DATA SIGNAL EQUIPMENT 2 2 2 2 2 CONNECTING TO PERSONAL COMPUTER (EXAMPLE) 11111Press the POWER button to turn on the power. 22222Press the DOOR OPEN button to open the door. 33333Set the input select switch inside this unit to SCSI. Push the center of the door to close. 44444Press the POWER button to turn off the power. Input select switch 55555 Connect the unit and the personal
Resumen del contenido incluido en la página 13
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS CONTENTS SHOOTING CONNECTIONS CONNECTION WITH USB DATA SIGNAL EQUIPMENT 2 2 2 2 2 CONNECTING TO PERSONAL COMPUTER (EXAMPLE) 11111Press the POWER button to turn on the power. 22222Press the DOOR OPEN button to open the door. 33 333Set the input select switch inside this unit to USB. Push the center of the door to close. Input select switch 444Press the POWER button to turn off the power. 44 55555 Connect the unit and the personal comput
Resumen del contenido incluido en la página 14
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS CONTENTS SHOOTING 12345678 CONNECTIONS SETTING OF DIP SWITCHES 2 2 2 2 2 SETTING DIP SWITCHES OFF ON All the switches are set to OFF at the time of shipment from the factory. Turn off the power before changing the DIP switch settings. Switch No. Setting Function 1 OFF Auto feed & cut mode When the door is closed after the print paper or a ink cassette is installed with this unit powered on, this unit automatically carries out paper fee
Resumen del contenido incluido en la página 15
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS CONTENTS SHOOTING BEFORE OPERATION Before printing, 11111 Install the print paper to this unit. (See below.) 22222 Install the ink ribbon to this unit. (page 14-15) INSTALLATION OF PRINT PAPER latches Spacers 2 The spacers are attached to the paper flanges. For the necessity of the spacers, see the Quick Setup Guide. Remove the cushions put between the paper flange and spacer when use them. How to attach and remove the spacers 1. Turn
Resumen del contenido incluido en la página 16
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS CONTENTS SHOOTING BEFORE OPERATION 22222Press the POWER button to turn on the power. 33333Press the DOOR OPEN button to open the door. Take the ink cassette in the printer out. 44444Install the print paper into the unit. Make sure to install the print paper firmly. NOTE Install the print paper into the unit slowly. If it is dropped along the ditches, the unit or accessories may be damaged. Direction of paper insertion 55555Remove the
Resumen del contenido incluido en la página 17
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS CONTENTS SHOOTING BEFORE OPERATION INSTALLATION OF INK RIBBON 2 2 2 2 2 INSTALLING THE INK RIBBON After installing the print paper, install the ink cassette into this unit. Before installing the ink cassette into this unit, load the ink ribbon in the ink cassette. NOTE • Place the ink cassette on a flat surface, when loading the ink ribbon. • Select a place that is free of dust when loading the ink ribbon. Dust or dirt settling on the
Resumen del contenido incluido en la página 18
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS CONTENTS SHOOTING BEFORE OPERATION 222Push the ink cassette toward the back of the unit. 22 Hold the handle of the ink cassette and push it straight toward the back of the unit. Then raise it until you hear a click to secure it in the ink cassette holder. NOTE If the ink ribbon is used up, repeat the steps 1 to 2 to replace the print paper and the ink ribbon. 333Push the center of the door to close. 33 The print paper setting is initia
Resumen del contenido incluido en la página 19
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS CONTENTS SHOOTING BEFORE OPERATION HANDLING OF PAPER / INK RIBBON SET 2 2 2 2 2 BEFORE PRINTING • Fingerprints or dust on the paper’s printing surface may degrade the print quality and cause paper jams. When the manual feed & cut mode has been selected, repeat the FEED & CUT procedure three times after replacing the print paper. When the print paper with the post card printing on its reverse side is installed, repeat five times. If yo
Resumen del contenido incluido en la página 20
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS CONTENTS SHOOTING BEFORE OPERATION INSTALLATION OF PRINTER DRIVER 2 The printer driver is required to print the data from the personal computer connected with this unit. ® The printer driver for Windows is supplied with this unit. Product name Required operating system ® ® ® Applies for Microsoft Windows 98 or Windows CPD9500W Millennium operation system ® ® ® Applies for Microsoft Windows 2000 or Windows XP CPD9500X operation system 2
