Resumen del contenido incluido en la página 1
COPY ONLINE
PAPER FEED
&CUT
DIGITAL COLOR PRINTER
MODEL
CP800DW
OPERATION MANUAL
CP800DW
ALARM SHEET/PAPER SCSI DATA
POWER
OPEN
THIS OPERATION MANUAL IS IMPORTANT
TO YOU.
PLEASE READ IT BEFORE USING YOUR
DIGITAL COLOR PRINTER.
This digital colour printer complies with the requirements of the EC
Directive 89/336/EEC, 73/23/EEC and 93/68/EEC.
The electro-magnetic susceptibility has been chosen at a level that
gains proper operation in residential areas, on business and light
indu
Resumen del contenido incluido en la página 2
TROUBLE- PRECAUTIONS CONNECTIONS FEATURES PREPARATION OTHERS SHOOTING CONTENTS CONTENTS SAFETY PRECAUTIONS ..................................................................... 2-4 FEATURES & FUNCTIONS.................................................................. 5-6 FRONT PANEL ...................................................................................... 5 INSIDE OF PRINTING UNIT ................................................................. 6 REAR PANEL ........................
Resumen del contenido incluido en la página 3
SAFETY PRECAUTIONS In the interest of safety, please observe the following precautions: POWER REQUIREMENT This Digital Color Printer is designed to operate on 120V, 60Hz AC in U.S.A. and Canada, 220-240V, 50Hz AC in Europe. Never connect to any outlet or power supply having a different voltage or frequency. WARNING: THIS APPARATUS MUST BE EARTHED. AVERTISSEMENT: CET APPAREIL DOIT ETRE MIS A LA TERRE. PROTECTIVE MEASURES IF ABNORMALITIES ARISE, ..... Use of the unit during emission of smoke or ab
Resumen del contenido incluido en la página 4
TROUBLE- PRECAUTIONS CONNECTIONS FEATURES PREPARATION OTHERS SHOOTING BE CAREFUL WITH THE PRINTING UNIT Don’t move the unit while the printing unit is sliding out. This may cause injury. Be careful not to catch your finger in the printing unit while the printing unit is being retracted into the unit. CONNECTION CABLES Use the provided power cord. When connecting the unit with an equipment with parallel data interface, use the parallel cross-over cable. INSTALLATION LOCATIONS MAINTAIN GOOD VENT
Resumen del contenido incluido en la página 5
SAFETY PRECAUTIONS CONNECTING DEVICES Read thoroughly "Operating Precautions" of the instruction booklets for the devices connected with the Digital Color Printer. The power cord must be disconnected after printing is over. CAUTION ON RELOCATING When transporting this unit, make sure it is not likely to be subjected to impacts. They can be a prime cause for damage. Further, make sure to disconnect the power cord from the power outlet, and the cables from the connected devices. OTHER CAUTIONS Dus
Resumen del contenido incluido en la página 6
TROUBLE- PRECAUTIONS CONNECTIONS FEATURES PREPARATION OTHERS SHOOTING PAPER FEED COPY ONLINE &CUT FEATURES & FUNCTIONS FRONT PANEL 2 3 4 5 67 8 CP800DW ALARM SHEET/PAPER SCSI DATA 9 POWER OPEN 1 A 11 1 11 POWER BUTTON 77 7 77 COPY BUTTON Press to turn on power. Press again to turn off power. Prints image from memory. When ON LINE indicator is lit, When the power is turned on, the indicator illuminates. this button is not functional. 22 2 22 ALARM LAMP 88 8 88 ON LINE BUTTON When
Resumen del contenido incluido en la página 7
FEATURES & FUNCTIONS INSIDE OF PRINTING UNIT 2 Ink cassette locking lever 1 Ink cassette compartment 3 Print paper fixing lever 4 Paper sending control 11 1 11 INK CASSETTE COMPARTMENT 33 3 33 PRINT PAPER FIXING LEVER Load the ink cassette here. Insert the cassette gently until Use this lever when inserting print paper. it snaps into place. 4 4 4 PAPER SENDING CONTROL 4 4 22 2 22 INK CASSETTE LOCKING LEVER Turn this control clockwise to rewind the print paper. Push this lever to take the i
Resumen del contenido incluido en la página 8
TROUBLE- PRECAUTIONS CONNECTIONS FEATURES PREPARATION OTHERS SHOOTING CONNECTIONS Make sure to turn off main power of the unit and other equipment before connection. CONNECTION WITH PARALLEL DATA INTERFACE CONNECTION PIN NO. 1 18 To PARALLEL port To PARALLEL 36 19 DATA terminal MODE switches Connector :JD36SL equivalent SCSI ID No. (36-pin) ON SCREW 1 2 3 4 5 6 7 8 OFF 1 2 3 4 5 6 7 8 DIRECT SNAP PARALLEL ACK AC LINE Input level :TTL ON PARALLEL OFF SCSI PARALLEL in
Resumen del contenido incluido en la página 9
CONNECTIONS 22 2 22 PARALLEL DATA SIGNAL Function Pin No. Return pin No. Signal From/to Strobe pulse for data reading. Incoming pulse width should 1 19 STROBE PC/DCP be 0.5 ms minimum. At regular conditions, “High” data will be read after becoming “Low”. High: data 1 2 20 DATA1 (LSB) PC/DCP Low: data 0 3 21 DATA2 PC/DCP Information will be expressed for parallel data of every signal 4 22 DATA3 PC/DCP from bit No.1 to No.8. 5 23 DATA4 PC/DCP 6 24 DATA5 PC/DCP 7 25 DATA6 PC/DCP 8 26 DATA7 PC/DCP 9
Resumen del contenido incluido en la página 10
TROUBLE- PRECAUTIONS CONNECTIONS FEATURES PREPARATION OTHERS SHOOTING CONNECTION WITH SCSI DATA SIGNAL EQUIPMENT Make sure to turn off main power of the unit and other equipment before connection. Set the MODE switch No. 1 to OFF (SCSI). (CONNECTION) Terminator To SCSI port ID No. switch To SCSI port SCSI ID No. ON SCREW 1 2 3 4 5 6 7 8 OFF 1 2 3 4 5 6 7 8 PARALLEL DIRECT SNAP ACK ON PARALLEL AC LINE OFF SCSI Digital Color printer Personal computer NOTE When this u
Resumen del contenido incluido en la página 11
Switching position Switching position PAPER FEED COPY ONLINE & CUT CONNECTIONS 22 2 22 Turn on the power of the personal computer connected. 33 3 33 Confirm that ON LINE button on the front panel is lit. SETTING MODE SWITCHES Set the mode switches (DIP-SW) on the rear panel according to the connected device. ON 1 2 3 4 5 6 7 8 OFF 1 2 3 4 5 6 7 8 DIRECT SNAP ACK ON PARALLEL OFF SCSI With the mode switch No.1, switch parallel or SCSI. ON ..........
Resumen del contenido incluido en la página 12
TROUBLE- PRECAUTIONS CONNECTIONS FEATURES PREPARATION OTHERS SHOOTING BEFORE OPERATION Before printing, 1. Remove the fixed screw on the printing unit and the protective cushion. (pages 11-12) 2. Insert print paper to this unit. (pages 12-13) 3. Install the ink cassette to this unit. (pages 14-15) PAPER SHEET SET The following types of paper sheet sets are available. Use our original consumable. We can not guarantee the failure of using others. 2 2 2 2 2 Print paper and ink sheet Product name P
Resumen del contenido incluido en la página 13
BEFORE OPERATION 22 2 22 Removing the protective cushion Unplug the power cord from outlet for safety. 11 1 11 Press OPEN button. The printing unit advances to the front. NOTE Do not touch the thermal head. Fingerprints or dust on the thermal head will degrade the print quality. 22 2 22 Pull out the protective cushion from the right side. Keep the removed cushion. It is required when transporting this unit. Protective cushion INSERTION OF PRINT PAPER 1 1 1 Move the knob on the printing unit to t
Resumen del contenido incluido en la página 14
TROUBLE- PRECAUTIONS CONNECTIONS FEATURES PREPARATION OTHERS SHOOTING Roller 2 Roller 3 33 3 33 Insert the print paper between roller 1 and 2. Roller 1 44 4 44 Insert the edge of the print paper to the roller 3. · Be sure to insert the paper straight. Print paper Roller Roller Roller Paper Paper Paper INCORRECT CORRECT INCORRECT 55 5 55 Feed the print paper through the paper outlet with your hand. 66 6 66 Pull the print paper to eliminate slack. 7 7 7 Move the knob on the side of the printing un
Resumen del contenido incluido en la página 15
BEFORE OPERATION INSERTION OF INK SHEET 22 2 22 INSTALLING THE INK SHEET White roller C E Install the ink sheet to the ink cassette before installing the ink cassette to the unit. 11 1 11 Put the colored roller of the ink sheet to the ink cassette. ABAB AB ABAB B A 22 2 22 Put the thin stick of white roller to the ink cassette. CC C CC Colored roller E 33 3 33 Put the thick stick of white roller to the ink cassette. DEDE DE DEDE · On the D position, turn the roller and set the notch of the roll
Resumen del contenido incluido en la página 16
TROUBLE- PRECAUTIONS CONNECTIONS FEATURES PREPARATION OTHERS SHOOTING 22 2 22 INSERT THE PRINTING UNIT 11 1 11 Push the printing unit until it is locked into place. 22 2 22 After plugging the power cord, press POWER button on the front panel. 3 3 3 3 3 Press ON LINE button to put out a lamp on the button. 4 4 4 4 4 Press PAPER FEED & CUT button. • The print paper is automatically cut after feeding about 10cm. 55 5 55 Repeat the above step 44 4 44 . • Fingerprints and dust can be removed by feedi
Resumen del contenido incluido en la página 17
BEFORE OPERATION USAGE AND KEEPING OF PAPER SHEET SET NOTE • Fingerprints or dust on the paper’s surface may degrade print quality and cause paper jams. Immediately after the paper is replaced, 2-3 images may be printed with a blank part due to hand’s dust or oil. • When print paper is rapidly transferred from a cool place to a hot place, vapor or dew will be generated on the paper’s surface causing paper jams or degraded print quality. Leave the print paper in the room to stabilize its temper
Resumen del contenido incluido en la página 18
TROUBLE- PRECAUTIONS CONNECTIONS FEATURES PREPARATION OTHERS SHOOTING INSTALLING PRINTER DRIVER Printer driver is required to print the data from a personal computer connected with this unit. CPD-04 and CPD-05 are supplied with this unit. Product name Operating conditions ® Applies for WindowsNT Workstation operating system Version 4.0 CPD-01NT Version 2.4 or later ® ® CPD-04 Applies for Microsoft Windows 95 or later Version 2.3 or later CPD-05 Applies for Macintosh System 7.0 or later Version 2
Resumen del contenido incluido en la página 19
INDICATION ON THE FRONT PANEL & COUNTERMEASURES INDICATION ON THE FRONT PANEL If for some reason printing is not possible or error occurs during printing, the indicator on the front panel will be lit. In this case, follow the procedure described below. :Lit : Not lit Page ALARM SHEET/PAPER SCSI DATA Cause and Countermeasures Print paper is not set. Print paper is not set correctly. 12-13 Print paper runs out during printing. *Note : 1 • Set the print paper correctly. The ink cassette is not ins
Resumen del contenido incluido en la página 20
TROUBLE- PRECAUTIONS CONNECTIONS FEATURES PREPARATION OTHERS SHOOTING BEFORE CALLING FOR SERVICE Reference Symptom Check & Remedy page No power • Is the power cord plug disconnected from the outlet? - Connect the power cord plug to the outlet firmly. The image is not printed. • Is the image data sent to this unit? 7-10 Confirm that the image data is sent to this unit. • Is the print paper or ink sheet used up? 12-15 Check the status. • Is the printing unit set correctly? 15 Set the printing unit
