Resumen del contenido incluido en la página 1
COLOUR VIDEO COPY PROCESSOR
MODEL
CP900E
OPERATION MANUAL
THIS OPERATION MANUAL IS IMPORTANT
TO YOU.
PLEASE READ IT BEFORE USING YOUR
COLOUR VIDEO COPY PROCESSOR.
This video copy processor complies with the requirements of the EC Directive
89/336/EEC, 73/23/EEC, 93/42/EEC and 93/68/EEC.
The electro-magnetic susceptibility has been chosen at a level that gains
proper operation in residential areas, on business and light industrial premises
and on small-scale enterprises, inside as well as outsi
Resumen del contenido incluido en la página 2
CONTENTS Contents ................................................................................................ 2 Safety precautions ................................................................................ 3-5 Special features .................................................................................... 6 Unpacking ............................................................................................. 7 Features and functions...............................................
Resumen del contenido incluido en la página 3
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION PRINTING ADJUSTMENTS OTHERS SHOOTING SAFETY PRECAUTIONS In the interest of safety, please observe the following precautions: POWER REQUIREMENT This Colour Video Copy Processor is designed for operation on 220-240V, 50Hz AC. Never connect to any outlet or power supply having a different voltage or frequency. WARNING: THIS APPARATUS MUST BE EARTHED. AVERTISSEMENT: CET APPAREIL DOIT ETRE MIS A LA TERRE. PROTECTIVE MEASURES IF ABNORMALITIES ARIS
Resumen del contenido incluido en la página 4
SAFETY PRECAUTIONS INSTALLATION LOCATIONS MAINTAIN GOOD VENTILATION Ventilation slots and holes are provided on this unit. Place the unit on a hard and level surface and locate at least 10 cm from walls to insure proper ventilation. When putting the unit on the system rack, take a space between the unit and the back of the rack. UNSUITABLE LOCATIONS Avoid shaky places or hot-springs areas where hydrogen sulfide and acidic ions are likely to be generated. PLACES WITH HIGH HUMIDITY AND DUST Do n
Resumen del contenido incluido en la página 5
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION PRINTING ADJUSTMENTS OTHERS SHOOTING TECHNICAL DESCRIPTIONS The supplier will make available on request such circuit diagrams, component part lists, descriptions, calibration instructions or other information which will assist the USER’s appropriately qualified technical personnel to repair those parts of the EQUIPMENT which are classified by the manufacturer as repairable. The use of ACCESSORY equipment not complying with the equivalent safe
Resumen del contenido incluido en la página 6
SPECIAL FEATURES SPECIAL FEATURES AVAILABLE IN VARIOUS MEDICAL FIELDS, INCLUDING ENDOSCOPY DIAGNOSIS 3 kinds of colouring characteristics (gamma curve) are employed, which are the best for medical diagnostic devices, including endoscope requiring precise images and ultrasound diagnostic equipment etc. The colour is reproducible for each diagnostic equipment with easy operation. Each gamma curve is adjustable for each user flexibly. 2 PRINT SIZES ARE AVAILABLE ACCORDING TO THE PURPOSE 2 printin
Resumen del contenido incluido en la página 7
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION PRINTING ADJUSTMENTS OTHERS SHOOTING COLOUR VIDEO COPY PROCESSOR COLOUR VIDEO COPY PROCESSOR UNPACKING UNPACKING Take the unit out of the box by the following procedures. Make sure to check the contents. 11 1 11 Open the top of the box. 22 2 22 Remove the cushion with contents. Be careful not to drop the contents. 3 3 3 Take the unit out of the box carefully. 3 3 Make sure to keep the unit horizontally. 44 4 44 Unwrap the packing. 2 2 2 CONT
Resumen del contenido incluido en la página 8
FEATURES & FUNCTIONS FRONT PANEL 7 1 23 4 5 6 8 D 9 A B C 7 7 11 1 11 POWER BUTTON(INDICATOR) 7 7 7 MEMORY BUTTON Press to memorize the image to be printed. When signal Press to turn on power. Press again to turn off power. is not inputted, memory is not available. When the power is turned on, the indicator illuminates. 88 8 88 PRINT BUTTON 2 2 2 2 2 LCD (LIQUID CRYSTAL DISPLAY) Press to print the image memorized by the MEMORY Indicates input signal settings and various function modes button.
Resumen del contenido incluido en la página 9
TROUBLE- OTHERS PRECAUTIONS FEATURES CONNECTIONS PREPARATION PRINTING ADJUSTMENTS SHOOTING REAR PANEL 2 3 4 5 1 6 REMOTE RS-232C S-VIDEO IN S-VIDEO OUT RGB 75Ω /HIGH IN 75Ω 7 VIDEO HIGH R G/G+SYNC B Y/SYNC IMPEDANCE 75Ω /HIGH OUT 75Ω HIGH 8 SYNC AC LINE 9 Potential equalization connector POWER ON OFF 75Ω /HIGH 75Ω HIGH This is used to equalize the potential of the 75Ω 75Ω 75Ω HIGH HIGH HIGH equipment connected to the unit. For details, refer to the installation instruction of the equipment to be
Resumen del contenido incluido en la página 10
FEATURES & FUNCTIONS REMOTE CONTROL UNIT 1 2 55 5 55 SET BUTTON Press to go to SAVE PRG. Repress to memorize the values DISPLAY and exit the MENU mode. See page 34-35. 3 COLOR FIELD PROG. ADJUST /FRAME + 9 66 6 66 STOP BUTTONS 4 - Press to cancel the printing process and start mechanical PRINT Q' ty initializing. When pressing these buttons during displaying 10 MENU SET MAIN MENU, SERVICE MENU will be displayed. 11 5 CLEAR STOP
Resumen del contenido incluido en la página 11
TROUBLE- OTHERS PRECAUTIONS FEATURES CONNECTIONS PREPARATION PRINTING ADJUSTMENTS SHOOTING H+V-SYNC. B G/G+SYNC. R H+V-SYNC. B G/G+SYNC. R CONNECTIONS The functions of this unit can be set by the menu screens displayed on the monitor. • Connection with a monitor • Connection with VIDEO/S-VIDEO signal equipment • Connection with RGB analog signal equipment • Connection with RS-232C equipment Connect this unit with a monitor to check the images to be printed and the images stored in memory. The fo
Resumen del contenido incluido en la página 12
CONNECTIONS 3 3 3 Press } } } button to select INPUT menu. 3 3 } } 4 4 ] ] 4 4 4 Press ] ] ] button. INPUT menu is displayed. Set the monitor polarity with “IN SYNC” on this menu. 55 5 55 Press or }} } }} button to select “IN SYNC”. The sync. signal level being selected, for example, “ttl” is displayed. 66 6 66 Set the sync. signal level according to the equipment to be connected. Press [ [ [ or ] ] ] button to select “ttl”, “sog” [ [ ] ] or “0.3v”. ttl Inputs the TTL level sync signal. sog In
Resumen del contenido incluido en la página 13
TROUBLE- OTHERS PRECAUTIONS FEATURES CONNECTIONS PREPARATION PRINTING ADJUSTMENTS SHOOTING E E E Press { { { or } } } button to select “RGB SOG ”. E E { { } } FF F FF Press [[ [ [[ or ]] ] ]] button to select “on” or “off”. You can select whether Sync. ON Green signal is added to the output signal or not. When “on” is selected, Sync. ON Green signal is output and when “off” is selected, only Green signal is output. Select “on” or “off” according to the monitor to be connected. off Only Green s
Resumen del contenido incluido en la página 14
R G/G+SYNC. B H+V-SYNC. CONNECTIONS CONNECTION WITH RGB ANALOG SIGNAL EQUIPMENT Make sure to turn off the power before setting. (EXAMPLE) RGB analog signal equipment To RGB analog SCAN START input terminals ( ) RECORD RED CONTRAST SCAN SPEED m, . REPLAY GREEN GREEN BRIGHTNESS BRIGHTNESS v bn Connection is not 10 KEY BLUE BLUE POWER z x c ON OFF required for RESET RESET WHITE BALANCE / SYNC ON G VCP REMOTE RS-232C S-VIDEO IN S-VIDEO OUT RGB IN 75Ω /HIGH 75Ω VIDEO HIGH R G/G+SYNC B Y/SYNC IMP
Resumen del contenido incluido en la página 15
TROUBLE- OTHERS PRECAUTIONS FEATURES CONNECTIONS PREPARATION PRINTING ADJUSTMENTS SHOOTING CONNECTION WITH RS-232C EQUIPMENT This unit can controlled through a RS-232C port with custom software. (Image data can not be input.) For the protocol, consult your dealer. Make sure to turn off the power before setting. RS-232C TERMINAL SIGNAL Pin number 1 13 To RS-232C terminal (RS-232C) To RS-232C treminal 25 14 Pin No. Signal line name Description Directions REMOTE RS-232C S-VIDEO IN S-VIDEO OUT RGB 7
Resumen del contenido incluido en la página 16
CONNECTIONS 44 4 44 Press ]] ] ]] button. RS232C menu is displayed. Set “BAUD RATE” on this menu. 55 5 55 Press {{ { {{ or }} } }} button to select “BAUD RATE”. The setting BAUD RATE (e.g. 1200) will be displayed. 66 6 66 Press [[ [ [[ or ]] ] ]] button to select “1200”, “2400”, “4800” or “9600” (bit/s). 77 7 77 Press {{ { {{ or }} } }} button to select “COMMAND TYPE”. 88 8 88 Press [[ [ [[ or ]] ] ]] button to select “a” , “b” or “c” . Select “a” for normal setting. Depending on the connected
Resumen del contenido incluido en la página 17
TROUBLE- OTHERS PRECAUTIONS FEATURES CONNECTIONS PREPARATION PRINTING ADJUSTMENTS SHOOTING BEFORE OPERATION Before printing, 1. Unlock the printing unit. (See below) 2. Install the print paper and ink cassette. (pages 17-21) PAPER SHEET SET When using this unit for printing, make sure to use the following types of paper sheet and ink sheet set. 22 2 22 PAPER SHEET SET Product name Ink sheet size No. of prints Usage CK900S S size 200 Colour print CK900L L size 130 Colour print CK900S4P S size 130
Resumen del contenido incluido en la página 18
BEFORE OPERATION 2 2 2 INSTALLATION OF PRINT PAPER 2 2 Do not remove the seal on the print paper yet. When using thermal paper, remove the seal as shown on the previous page. Gear Seal 2 11 1 11 Insert the print paper roller with gear on the left. Press the folder 1 as shown right, and set the print paper roller. 1 Front side 2 2 2 2 2 Set the other side of roller without gear. 1 Right side Left side arrow marks 33 3 33 Remove the seal, and insert the edge of the print paper right below the roll
Resumen del contenido incluido en la página 19
TROUBLE- OTHERS PRECAUTIONS FEATURES CONNECTIONS PREPARATION PRINTING ADJUSTMENTS SHOOTING 2 2 2 PRECAUTIONS ON SETTING THERMAL PAPER 2 2 When setting the thermal paper, observe the following precautions to prevent paper jam. • Do not use defective paper. Do not use the bent or wrinkled paper. • Adjust the paper position correctly. When the paper is fed out skewed from the print exit, adjust the paper position so that it is fed out straight. • Do not slack the roll paper. Set the paper tightly t
Resumen del contenido incluido en la página 20
BEFORE OPERATION NOTE • Do not remove the IC chip or IC holder from the ink sheet. Removal of the IC will stop the printer from functioning correctly. • Set the projected part of the IC holder to the correct position as shown below. IC holder Projected part 22 2 22 INSTALLING THE INK CASSETTE 11 1 11 Eliminate any slack of the ink sheet. Hold the colored roller and turn the white roller. 22 2 22 Insert the ink cassette with the ink sheet into its compartment. Put the ink cassette of the ink shee
