Resumen del contenido incluido en la página 1
PagePrinter
Network Adapter:
Utilities & Environments
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
Ethernet C, D Utilities & Environments For use with: TCP/IP networks Windows 95/NT operating systems Novell NetWare networks
Resumen del contenido incluido en la página 4
The contents of this manual may be revised without prior notice and without obligation to incorporate changes and improvements into units already shipped. Every effort has been made to ensure that the information included here is complete and accurate at the time of publication, but we cannot be held responsible for errors and omissions. Copyright Lexmark International, Inc. 1994, 1996 Printed in Spain. All rights reserved. No part of this manual may be reproduced or translated, stored in
Resumen del contenido incluido en la página 5
Contents Preface ......................................................................................................................................... V Introduction........................................................................................................V Chapter 1 Overview of the Utilities, the Network Adapter and MarkVision..............................1-1 Introduction .........................................................................................
Resumen del contenido incluido en la página 6
Contents Adapter lights................................................................................................ 2-28 Adapter service ............................................................................................. 2-28 Chapter 3 Using Windows 95 operating systems...................................................................... 3-1 Introduction........................................................................................................
Resumen del contenido incluido en la página 7
Contents Using the adapter list ...................................................................................... 5-4 Selecting items from the menus...................................................................... 5-5 Setting up the adapter ............................................................................................................. 5-6 What setup accomplishes................................................................................ 5-6 Utilities to u
Resumen del contenido incluido en la página 8
Contents iv PagePrinter Network Adapter: Utilities & Environments
Resumen del contenido incluido en la página 9
Preface Introduction Thank you for buying this multi-protocol Network Adapter. You can use this guide to learn how to install and configure utilities so that your printer works with: • TCP/IP networks • Windows 95 operating systems • Windows NT operating systems • Novell NetWare networks Terminology In this book, the term utilities refers to the files on the CD-ROM or diskettes that you received with the printer. The term adapter refers to this Network Adap
Resumen del contenido incluido en la página 10
Preface vi PagePrinter Network Adapter: Utilities & Environments
Resumen del contenido incluido en la página 11
CHAPTER Overview of the Overview of the Utilities, the Network Adapter and MarkVision Utilities, the 1 Network Adapter and MarkVision Introduction Thank you for buying this multi-protocol Network Adapter. As with most new purchases, you probably have a few questions. We will answer some of them in this introduction for you. What environments do the utilities run in? Since each environment is different, please see the appropriate chapter in this manual for more details a
Resumen del contenido incluido en la página 12
Introduction What is MarkVision? MarkVision is a utility that allows administrators and users to control and see the status of printers on their networks. In addition, it allows network administrators to: • automatically configure print drivers. The new bidirectional, network-aware PCL and PostScript Windows drivers can configure themselves with many printers. This allows users to make sure that their application driver settings are correct. • install MarkVision and prin
Resumen del contenido incluido en la página 13
Introduction Is it possible to set a password for this adapter? Passwords on the Network Adapter work as follows: Overview of the • The password protects all the adapter’s settings from being changed (for Utilities, the example, nicknames, queue names, file servers). Network Adapter and MarkVision • The passwords protect the adapter from someone inadvertently or mistakenly changing a setting. The password encryption algorithm is not designed to protect against ser
Resumen del contenido incluido en la página 14
Introduction 1-4 PagePrinter Network Adapter: Utilities & Environments
Resumen del contenido incluido en la página 15
CHAPTER TCP/IP networks Using TCP/IP networks 2 Introduction Thank you for buying this multi-protocol adapter. This chapter explains how to set up and use your printer on a Transmission Control Protocol/Internet Protocol (TCP/IP) network using this Network Adapter. Who this chapter is designed for This chapter is designed for technical people such as TCP/IP programmers and experienced network administrators. It assumes that you have a good working knowledge of your TCP/IP hard
Resumen del contenido incluido en la página 16
Setup For more information This utility guide uses standard TCP/IP protocols. Information about these standard protocols is available in RFCs (Request For Comments). These RFCs contain TCP/IP information that is not unique to the Network Adapter. To obtain an RFC, use FTP services on the Internet as an anonymous user to: nic.ddn.mil Look for the RFC in the /rfc directory. For more information about TCP/IP, we recommend a book by Douglas Comer entitled Internetworking with TCP/IP, Volume I: P
Resumen del contenido incluido en la página 17
Setup Step 1: check the physical connections First you need to make sure that your printer and adapter are installed and TCP/IP working correctly. Check the following items. networks • Make sure that the printer you want to use is installed on the LAN with the appropriate Ethernet cable. • Make sure that the adapter is installed in the printer. Instructions for setting up the printer and installing adapters are shipped with the printer. • Make sure that the printer is connected to the LAN wi
Resumen del contenido incluido en la página 18
Setup Sample setup page The Network Adapter setup page looks similar to the example below. Network Card Type: Ethernet EOJ Timeout: 90 UAA: 00200008A803 0004001015C0 LAA: 000000000000 000000000000 Part Number, EC: 1381603, MN_XL_E Firmware Revision: 4.124.1 LPT 1 NPAP Active, NPAP Mode: Yes, Auto Busy Timeout: 90 Printer Type, Port Type: PP14, Enhanced LexLink (Active) Nickname: 00200008A803 NetWare (Active) Login Name: !LEX00200008A803 NetWare Mode: PSERVER IP (
Resumen del contenido incluido en la página 19
Setup Step 3: set the IP address, netmask, and gateway You can set the IP address, netmask, and gateway for this adapter in several TCP/IP ways. networks The simplest way to set the information is directly on the printer’s control panel. For information about setting the information on the printer’s control panel, go to “Setting the information via the printer control panel” on page 2-8. You may: • Use a TCP/IP bootstrap protocol (BOOTP), if you have a BOOTP server running on yo
Resumen del contenido incluido en la página 20
Setup Setting the information using a bootstrap protocol You may set the IP address, netmask, and gateway using a TCP/IP bootstrap protocol (BOOTP), if you have a BOOTP server running on your network. Make sure the BOOTP server is running on the same LAN segment as the adapter. (Some routers will pass the packets, but many will not. If the BOOTP server is on a different LAN segment, check your router’s documentation to be sure packets will cross.) To set the IP address, netmask,
