Resumen del contenido incluido en la página 1
Infoprint 1116
Setup Guide
S510-2307-00
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
Infoprint 1116 Setup Guide S510-2307-00
Resumen del contenido incluido en la página 4
Resumen del contenido incluido en la página 5
English
Resumen del contenido incluido en la página 6
Edition: August 2001 Lexmark, MarkVision, and MarkNet are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. Macintosh is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. © Copyright 2001 Lexmark International, Inc. All rights reserved. UNITED STATES GOVERNMENT RESTRICTED RIGHTS This software and documentation are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the Government is subject to restr
Resumen del contenido incluido en la página 7
Table of contents Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v About your printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .v About this book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Other sources of information . . . . . . . . . . . . . . . . . . . . . . . . viii Viewing the Publications CD . . . . . . . . . . . . . . . . . . . . . . . . . . ix Step 1: Unpack the printer . . . . . .
Resumen del contenido incluido en la página 8
Step 4: Install the tray 2 option . . . . . . . . . . . . . . . . . . . . . 15 Step 5: Attach cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Local printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Network printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Attaching a power cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Step 6: Load paper . . . . . . . . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 9
Preface About your printer Three printer models are available: an entry model, a standard model and a network model. The differences between these three models are listed in the following table. Item Entry model Standard model Network model Base memory 2MB 8MB 16MB Maximum memory 66MB 72MB 80MB Emulations PCL 5e and PostScript Level 2 and PostScript Level 2 and Macintosh PCL 6 PCL 6 compatibility Connectivity Parallel and USB Parallel and USB 10/100 Base-TX Ethernet and USB Ships with prin
Resumen del contenido incluido en la página 10
Paper support Tray 1 Paper support Manual feed Top output bin Paper guide Operator Front output door panel lights Optional tray 2 Use this feature: When you want to: Tray 1 Load up to 150 sheets of paper or 10 sheets of other media. Paper support Support media in tray 1 or the top output bin. Manual feed Load a single sheet of paper/other media. Use for transparencies, labels, envelopes, and card stock. Paper guides Adjust the width of the media in tray 1 and the manual feed. Operator pa
Resumen del contenido incluido en la página 11
Entry and standard model Network model Parallel cable connector Ethernet connector USB cable connector Power switch Power cord connector Power Power cord switch connector Use this feature: When you want to: Parallel cable connector Connect the computer to the entry or standard model printer’s parallel port with a parallel cable. USB connector Connect the computer to the network printer’s USB port with a Universal Serial Bus (USB) cable. Ethernet cable connector Connect the computer to th
Resumen del contenido incluido en la página 12
Operator panel The operator panel has 6 lights and 1 button. Different light sequences provide status, attendance and service information. Depending on the light sequence, briefly (approximately 1 second) push the operator panel button to restart the printer, display an error code, or activate other printer functions. Use your printer driver to change the paper source, paper size and other printer settings. About this book Note: See the safety information on the This Setup Guide provide
Resumen del contenido incluido en la página 13
Viewing the Insert the Publications CD into your CD- ROM drive. If the CD does not Publications CD automatically launch: 1 Select your CD-ROM drive. 2 Double-click START.PDF (or double-click the CD icon on your desktop and then click START.PDF if you are using a Macintosh computer). You must have a copy of Adobe Acrobat Reader, Version 4.05c with Search or later installed on your computer to view the Publications CD. If Acrobat Reader is not installed on your operating system, visit
Resumen del contenido incluido en la página 14
Preface x
Resumen del contenido incluido en la página 15
Step 1: Unpack the printer 1 Remove the printer and all accessories from the packaging carton. Save the carton and packing materials in case you need to repack the printer for service or storage. 2 Remove all tape from outside and inside the printer. Power cord 3 Make sure you have the following items: Overlay — Printer with print cartridge installed — Setup Guide — Publications CD Drivers CD Setup Guide and — Quick Reference card Publications CD —Power cord Quick Reference card —Drive
Resumen del contenido incluido en la página 16
4 Place the printer on a flat, stable surface in a well-ventilated area near your computer. Do not place the printer: — In direct sunlight — Near heat sources or air conditioners — In dusty or dirty environments Attaching an operator If you have a non-English operator panel overlay in your printer box and wish to panel overlay use it, peel it off, align it on the operator panel, and press it into place. Removing print cartridge packaging 1 Use the finger tab to pull down the printer cove
Resumen del contenido incluido en la página 17
2 Grasp the cartridge handle and pull the print cartridge straight up. 3 Remove the protective foam packaging from the print cartridge. Cartridge handle 4 Pull off the plastic piece attached to the ends of the print cartridge. Discard the plastic piece, foam and paper. 5 Continue with “Install the print cartridge” on page 4. Unpack the printer 3
Resumen del contenido incluido en la página 18
Step 2: Install the print cartridge 1 Shake the cartridge to distribute the toner evenly. 2 Insert the print cartridge: a Align the colored labels on either side of the print cartridge with the corresponding labels in the printer. b Holding the handle, tilt the print cartridge down and guide it between the print cartridge grooves. c Push down on the cartridge until it is firmly in place. Install the print cartridge 4
Resumen del contenido incluido en la página 19
3 Close the printer cover. What do I do next? Task Go to page ... Install optional memory 6 Install tray 2 15 Attach cables 17 Install the print cartridge 5
Resumen del contenido incluido en la página 20
Step 3: Install memory cards Depending on your printer model, you can increase printer memory for a total of up to 66MB (entry model), 72MB (standard model), and 80MB (network model). If you have a standard or network model, you can also install a 1MB, 2MB, or 4MB optional flash memory card for storing downloaded fonts or macros. Removing the printer Before installing any memory options, you must remove the printer side cover. side cover Install memory cards 6
