Resumen del contenido incluido en la página 1
OPERATION MANUAL
BF-030SPP/WPP
PLUS
Resumen del contenido incluido en la página 2
First of all, we would like to thank you very much for purchasing a Plus Copy board CONFERENCE MODEL. Please read this Operation Manual before using the machine to get the best performance out of the product. We recommend that you keep this manual for future reference. EXPLANATION OF UL REGULATORY LABEL (USA ONLY) PLEASE NOTE: The description "Computer Rooms" on the label located on the rear of the copyboard, refers to areas where an abundance of computer control equipment (such as high output s
Resumen del contenido incluido en la página 3
Printer must be purchased separately. Compatible printer: HP LaserJet 6L, 6Lse, 6Lxi, 6MP, 6Pse, 6Pxi *Compatible printers are subject to change without notice. Please call PLUS @ 1-800-289-7587 with question regarding printer compatibility. *PLUS BF-030PP plain paper electronic copy board dose not have a built-in thermal printer. FEATURES The world's first plain paper printing electronic copy board with two built-in interface that let you print directly from the writing pancl's surface to a com
Resumen del contenido incluido en la página 4
SAFETY PRECAUTIONS Before use (picture displays). Please read this manual carefully before using your board-Fax BF-030SPP/WPP and keep the manual handy for future reference. CAUTION TO PREVENT SHOCK, DO NOT OPEN THE CABINET. NO USER-SER- VICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PLUS SERVICE PERSONNEL. WARNING TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT USE THIS UNIT’S GROUNDED PLUG WITH AN EXTEN- SION CORD OR IN AN OUTLET UNLESS ALL THREE PRONGS CAN B
Resumen del contenido incluido en la página 5
PRODUCT FEATURES Back Side Front Side 50mm × 50mm (2"×2") cross-ruled Writing surface Accessory tray Control panel Connection ports T-frame Caster Power cord NOTE: Printer not included. Printer must be purchased separately. Compatible printer: HP LaserJet 6L, 6L, 6Lse, 6Lxi, 6MP, 6Pse, 6Pxi *Compatible printers are subject to change without notice. Please call PLUS @ 1-800-289-7587 with qucstion regarding printer compatibility. *PLUS BF-030PP plain paper electronic copy board dose not have a bui
Resumen del contenido incluido en la página 6
CONTROL FUNCTIONS CONTROL PANEL Power Switch ..................... Pushing to the " " (ON) side causes the power to go ON. "01" is displayed in the LED panel. Power lamp ........................ The lamp (green) goes on when the switch is turned on. Error lamp .......................... Lights (red) when a printer error occurs. Blinks when the copy key is pressed while sending data from the PC. LED panel .......................... Displays the number of copies. The number o
Resumen del contenido incluido en la página 7
OPERATION The following is the explanation of operation assuming an HP LaserJet 6L is being used as the printer. If any other compatible printers are to be used, please see the operation manual for that particular. *Please see Page.1 for compatible printers. Before Use Press the caster lock switches to set the casters to the lock position. Insert the power cord plug in the socket. Turn the power switch ON. The power lamp blinks 2-3 seconds and then remains lit (green). After all the lamps l
Resumen del contenido incluido en la página 8
OPERATION Selecting the Paper Path Operate the paper path lever on the lower Up left side up the front of the printer to select the paper path. Pushing the lever up causes the paper to be ejected in the tray on the top. Pushing the lever down causes the paper to be ejected from the font of the printer. Down Do not operate the lever during copying as this could cause paper jams. If there are many copies, to be printed use the paper eject tray on the top. Attaching the toner cartridge To attach
Resumen del contenido incluido en la página 9
OPERATION Operation Use the special markers to write on the board. Making Copies Making a single copy. Press the Copy key. The writing surface moves the equivalent of one side and the contents are copied onto paper. When making a single copy it is not necessary to set the number of copies. Making multiple copies. Use the +/- keys to set to the required number of copies. Press the Copy key. The writing surface moves the equivalent of one side and the contents are copied on multiple sheets of pa
Resumen del contenido incluido en la página 10
OPERATION Making Additional Copies (Repeat) To make a single copy Press the Repeat key. The 1 additional sheet is printed out from data that was just copied. There is no need to set several sheets when making only 1 copy. To make additional copies Set the number of copies needed with the [+] or [-] keys. Press the Repeat key. The copies are printed out from data that was just copied. A maximum of 99 copies can be set. The Stop key is disabled during printout. Be sure to set the correct number o
Resumen del contenido incluido en la página 11
OPERATION Printing of PC data Use the printer cable to connect the PC printer connector and the, PC LPT connector of the board. Install the printer driver in the PC. Use the PC applications to print to the printer. A PC printer cable is not included with this equipment. Please use a printer cable conforming with IEEE regulations. Consult the printer manual for the method of installing the driver. The accessory driver software for the printer is for Windows and cannot be connected to a Macintosh
Resumen del contenido incluido en la página 12
MAINTENANCE/STORAGE Conduct regular maintenance as described below to insure clear copies at all times. (1) Cleaning the writing surface. If the writing surface is dirty, use a damp cloth to clean it off. In case of severe build- up, use a neutral cleaner diluted in water. Be sure the sheet is completely dry before operating the equipment again. (2) Cleaning the accessory tray and frame. Use a damp cloth to clean off any residue from markers on the accessory tray and frame. HANDLING PRECAUTION
Resumen del contenido incluido en la página 13
TROUBLE SHOOTING BEFORE CALLING FOR HELP, TRY .... PROBLEM CHECKPOINT POWER WONT TURN ON Check if power cord is connected to outlet (plug socket). WONT COPY EVEN BY Check if printer power cord or printer cable has PRESSING COPY KEY been disconnected. Check if error lamps on the printer or main unit are lit up. (If these are lit up, try turning the power off temporarily and then turning it back on again.) WHEN SHEET WRITING CAN'T Was writing done with other than the special BE REMOVED WITH ERASER
Resumen del contenido incluido en la página 14
SPECIFICATIONS Configuration BF-030SPP BF-030WPP 920 (H) 1300 (H) mm 920 (H) 1800 (H) mm Writing surface size 36 51 inch 36 70 inch 880 (H) 1240 (H) mm 880 (H) 1740 (H) mm Effective reading size 34 48 inch 34 68 inch Board section Number of pages 2 pages Screen drive method Unidirectional endless drive method Feint lines 50 mm (2"¥2") cross-ruled Writing tools Special markers (black, red, blue) Reading method CCD sensor flat surface scan reading Power source switch, copy, number of cop
Resumen del contenido incluido en la página 15
PLUS CORPORATION 3-B22, NAKASE 1-CHOME, MIHAMA-KU, CHIBA 261-8501 JAPAN PHONE: 043-296-3056 FAX: 043-296-3025 TELEX: J22113 PLUSJIM, CABLE PLUSJIMUK TOKYO 13
