Resumen del contenido incluido en la página 1
KD96009-0648
LINE THERMAL PRINTER
MODEL KD02906-12XX Series
User’s Manual
FUJITSU LIMITED
Resumen del contenido incluido en la página 2
WEEE MARK En Ge Fr Sp It Du Da Por Pol
Resumen del contenido incluido en la página 3
Declaration of Conformity This printer conforms to the following Standards: Low Voltage Directive 73/23/EEC, 93/68/EEC and the EMC Directive 89/336/EEC, 92/31/EEC, 93/68/EEC. LVD: EN60950-1 EMC : EN55022 Class A EN61000-3-2 EN61000-3-3 EN55024 This declaration is applied only for 230V model. IMPORTANT: This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It
Resumen del contenido incluido en la página 4
GENERAL PRECAUTIONS ● Before using this product, be sure to read through this manual. After having read this manual, keep it in a safe, readily accessible place for future reference. ● The information contained herein is subject to change without prior notice. ● Reproduction or transfer of part or all of this document in any means is prohibited without permission from FUJITSU LIMITED. ● Note that FUJITSU LIMITED is not responsible for any operation results regardless of missing, error, or mispr
Resumen del contenido incluido en la página 5
SAFETY PRECAUTIONS ... WHICH SHOULD BE STRICTLY OBSERVED Before using this product for the first time, carefully read these SAFETY PRECAUTIONS. Improper handling may result in accidents (fire, electric shock or injury). In order to prevent injury to operators, third parties, or damage to property, special warning symbols are used in the User’s Manual to indicate important items to be strictly observed. ● After having read this Manual, keep it in a safe, readily accessible place for future refere
Resumen del contenido incluido en la página 6
PRECAUTIONS ON PRINTER INSTALLATION WARNING ■ Do not use or store this product in a place where it will be exposed to: * Flames or moist air. * Direct sunlight. * Hot airflow or radiation from a heating device. * Salty air or corrosive gases. * Ill-ventilated atmosphere. * Chemical reactions in a laboratory. * Airborne oil, steel particles, or dust. * Static electricity or strong magnetic field. • Neglecting these warnings may result in printer failure, overheating, emission of smoke, fire, or e
Resumen del contenido incluido en la página 7
CAUTION Do not use the printer under the following conditions. ■ A state subject to vibration or unstable state. ■ A state with this product slanted. • Otherwise dropping may cause injury. • Poor print quality may occur. ■ A state where the printer ventilation holes are obstructed by a nearby wall or other equipment. ■ A state where any object is placed on the printer ■ A state where the printer is covered or wrapped by a cloth or bed clothing • Be careful about internal heat buildup, which co
Resumen del contenido incluido en la página 8
PRECAUTIONS IN HANDLING THE PRINTER WARNING Please observe the following precautions for Powered USB cable.: ■ Do not plug or unplug the Powered USB cable with a wet hand. ■ Use the Powered USB cable only at the specified POS unit. ■ Do not use a deformed or damaged the Powered USB cable. ■ Do not move the printer while the printer power is on. • Neglecting to handle properly may result in printer failure, emission of smoke, fire, or electric shock. • An overload may cause the power cord to over
Resumen del contenido incluido en la página 9
CAUTION Caution label is attached on the position shown in the following figure. Carefully read the precautions in handling before using the printer. THIS LABEL INDICATES THE RISK OF ANY INJURY DUE TO “HIGH TEMPERATURE” OF THE PRINT HEAD. ■ Do not transport this printer with the paper roll inside. • Printer failure or breakage may occur. To prevent possible malfunction or failure observe the following. ■ Avoid operating the printer without paper properly loaded. ■ Avoid the use of paper not com
Resumen del contenido incluido en la página 10
CAUTION To prevent injury and printer failures from worsening, observe the following: ■ Do not touch the printing surface of the thermal head. ■ Do not touch any of the moving parts (e.g., paper cutter, gears, active electrical parts) while the printer is working. ■ In case of trouble do not attempt to repair the printer. Ask FUJITSU LIMITEDservice for repair. ■ Be careful that the printer cover does not entrap your hands or fingers. ■ Be careful with sharp edges on the printer. Do not allow t
Resumen del contenido incluido en la página 11
THE TABLE OF CONTENTS 1. GENERAL OUTLINE ...................................................................9 1.1 Features ..........................................................................................9 1.2 Unpacking .....................................................................................10 1.3 Model Classification.....................................................................10 1.4 Basic Specifications .........................................................
Resumen del contenido incluido en la página 12
1. GENERAL OUTLINE This product is a thermal line printer designed for use with a POS terminal. With extensive features, they can be used in a wide range of applications. 1.1 Features ●Drop-in Paper Roll mechanism facilitating easy paper handling and head cleaning. ● High speed (220 mm/s) printing. ● Versatile roll capacity with ability to use 80 mm and 58 mm wide paper rolls. (Dedicated for each model) ● Can use paper roll with a maximum of 102 mm diameter. ● Equipped with Powered USB interfa
Resumen del contenido incluido en la página 13
1.2 Unpacking When unpacking the printer, confirm that the following are provided: ● Printer: 1 ● Sample paper roll: 1 roll ● User’s manual (This manual): 1 User’s manual Printer Sample paper roll (This manual) 1.3 Model Classification The position of partition and color of case differ depending on the model used. • KD02906-1200 (Spec: 58mm wide, white) • KD02906-1201 (Spec: 58mm wide, black) • KD02906-1202 (Spec: 80mm wide, white) • KD02906-1203 (Spec: 80mm wide, black) — 10 —
Resumen del contenido incluido en la página 14
1.4 Basic Specifications Item Specifications Model KD02906-1200 , KD02906-1201, KD02906-1202, KD02906-1203 Print method Line thermal dot print method Print width *1 72 mm/576 dots, 48 mm/384 dots Dot density 8 × 8 dots/mm (203 dpi) Print speed 220 mm/s (Fastest, print density 130 %), 1760 dot lines/s Number of print columns Dot configuration Number of print (columns) (Dot) columns *2 Paper width 80mm 58mm Font Font A 48 35 12 × 24 Font B 57 42 10 × 24 Font C 72 52 8 × 16 Character size *3 Font
Resumen del contenido incluido en la página 15
2. EXPLANATION OF PRINTER PARTS 2.1 Printer Appearance Printer cover Cover open lever Rear connector Operation panel (Front view) (Rear view) ● Printer cover Paper is loaded under this cover. ● Cover open lever To refill or replace paper, open the printer cover by lifting the cover open lever. — 12 —
Resumen del contenido incluido en la página 16
Operation Panel FEED button POWER LED ERROR LED ● POWER LED Illuminated when the printer power is on and off when the printer power is off. May blink or light in a special mode or in case of failure. ● ERROR LED Illuminated or blinks when paper is empty or in case of failure. The interval length of blinking represents the type of error. ● FEED button Pressing this button once causes the paper to feed one line. The longer the button is pressed, the more paper is fed. In case of auto cutter error
Resumen del contenido incluido en la página 17
2.2 Printer Cover Inside Print (thermal) head ● Paper feed roller Feeds paper as part of print mechanism. ● Paper-near-end sensor Paper feed roller Detects near paper end, change position in accordance with the Auto cutter outer diameter of paper core. ● Auto cutter Cuts the paper with a command at the end of printing. Cutting method is selectable between partial cut and full cut with a command. ● Print (thermal) head Prints characters and/or graphic data on thermal paper. Paper-near-end senso
Resumen del contenido incluido en la página 18
3. PREPARATION 3.1 Connecting Interface Cables Confirm that the power switch of the POS terminal is OFF and connect the interface cable. Orient the interface cable connector correctly and insert it into the POS terminal. CAUTION! ■ When disconnecting the cable, always hold the connector. ■ Avoid locating the interface cable in places which may cause tripping or falling. — 15 —
Resumen del contenido incluido en la página 19
3.2 Connecting the Cash Drawer Cash drawer 1. Confirm that the power switch of the POS kick-out connector terminal is OFF. 2. Confirm the top and bottom of the cash drawer cable connector and insert it into the cash drawer kick-out connector at the back of the printer. Cash drawer cable connector CAUTION! DO NOT connect any other device than the specified cash drawer to the cash drawer kick-out connector. (DO NOT connect a telephone line either.) (1) Connector Pin Configuration Connector used:
Resumen del contenido incluido en la página 20
3.3 Partition for Paper Roll At the time of shipment, this partition is set to 80-mm wide (with one partition) or 58-mm wide (with two partitions) depending on the model. Do not remove the partition. 80mm type 58mm type Partition — 17 —
