Manual de instrucciones de Fujitsu FTP-634MCL002

Resumen del contenido incluido en la página 1

BATTERY DRIVE, FTP-604 Series
3” TYPE MECHANISM AND INTERFACE BOARD
FTP-634MCL001/002/FTP-624DCL/DSL002
n OVERVIEW
FTP-634MCL/FTP-624DCL/DSL Series is a high speed line
thermal printer driven by battery, printing on 3-inch wide paper
(80 mm/ 85 mm).
The printer is compact and lightweight, and the design allows
easy head maintenance, head cleaning and head
replacement.
This printer is suitable for a variety of applications, such as
hand held terminals, POS terminals, ticket machines, coupon FTP-

Resumen del contenido incluido en la página 2

FTP-634MCL001/002/FTP-624DCL/DSL002 n DESIGNATION Item Part number 1 Printer mechanism FTP-634MCL001/002* 2 Centronics FTP-624DCL002* Interface Board 3 RS-232C FTP-624DSL002* LSI Micro Controller Unit FTP-624CU102 1 Thermal head cables FTP-624Y002* , FTP-624Y003 Parallel interface cable FTP-441Y201 Cables Serial interface cable FTP-624Y301 Power cables (logic, head and motor) FTP-621Y401, FTP-621Y601 *1: 001 is for front paper insertion (curl path) and 002 is for rear paper insertion (straight p

Resumen del contenido incluido en la página 3

FTP-634MCL001/002/FTP-624DCL/DSL002 (Continued) Item Specifications Voltage: 4.2 to 8.5 VDC (equivalent to 2 Lithium lon batteries) For head Peak current: approx. 3.5 A (conditions: room temp., 7.2VDC, 128 dots on) Power Voltage: 4.2 to 8.5 VDC (equivalent to 2 Lithium lon batteries) For motor supply Peak current: approximately 0.8 A (conditions: room temperature, 7.2VDC) Voltage: 5 V DC± 5% For logic Current: 0.2 A maximum Mechanism 108 (W) × 46 (D) × 20 (H) mm (excluding lever and knob diamete

Resumen del contenido incluido en la página 4

2-MOUNTING HOLE FTP-634MCL001/002/FTP-624DCL/DSL002 n DIMENSIONS Printer mechanism PAPER INSERTION (MCLOO1) 20.1 HEAD UP LEVER (AT HEAD DOWN) CENTER OF PAPER PAPER INSERTION (MCLOO2) HEAD CONNECTOR ±1 50.9 57.0 (107.9) Unit: mm 4 45.5 1.5 (150) (7.5)

Resumen del contenido incluido en la página 5

FTP-634MCL001/002/FTP-624DCL/DSL002 Interface board 130.8 120.7 105.4 71.1 33.0 5.1 15.2 5.1 CN5 CN12 CN9 CN10 CN11 CN1 CN2 CN4 59.7 5.1 5.1 73.7 4-03.6 86.4 105.4 114.2 120.7 Mounting Height Mounting Height * CN9 on FTP-624DSL only ** CN8, CN11, CN12 not used Unit: mm 5 17.0 5.0 26.7 39.4 CN6 52.1 CN7 88.9 78.7 39.4 5.15.1 CN3 CN8 5.1 5.1 .6

Resumen del contenido incluido en la página 6

FTP-634MCL001/002/FTP-624DCL/DSL002 n CONNECTOR PIN ASSIGNMENT FOR PRINTER MECHANISM 1. Thermal Head Head side 1: B11B-PH-K-S-2.2 (J.S.T.) or equivalent 2: B10B-PH-K-S-2.2 (J.S.T.) or equivalent Board side 1: PHR-11 (J.S.T.) or equivalent 2: PHR-12 (J.S.T.) or equivalent Connector Thermal Head 1 Connector Thermal Head 2 Nl o.St ignaCommen Nlo.St ignaCommen 15S5 TBPrintenablesignal 1HVdPowerforhea 26S6 TBPrintenablesignal 2HVdPowerforhea 37S7 TBPrintenablesigna

Resumen del contenido incluido en la página 7

FTP-634MCL001/002/FTP-624DCL/DSL002 n FUNCTION Im tem Ite 1n.T. estprintfunctio 8nMotorpowersavingfunctio 2n.P. aperoutdetectio 9nMarkdetectionfunctio 3n .P. apernearenddetectio 1n0MCUoperationabnormalitydetectio 4n.H. eadupdetectio 1n1PowerON/OFFsequenceprotectio 5n .T. hermalheadtemperatureabnormalitydetectio1n2Motorover-currentprotectio 6n.B. low-outfusedetectio 1r3Hardwaretime 7n .Headvoltageabnormalitydetectio n INTERFACE, COMMAND, OPTIONS Please refer to the FTP-624DCL/DSL DATA SHEET. Euro