Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
For United States Users This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and; if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is
Resumen del contenido incluido en la página 3
Resumen del contenido incluido en la página 4
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein. Neither Seiko Epson Corporation nor its affil
Resumen del contenido incluido en la página 5
IMPORTANT SAFETY INSTRUCTIONS • Read all of these instructions before you set up your printer. • Follow all warnings and instructions marked on the printer. • Unplug the printer from the wall outlet before you clean it, and use a damp cloth for cleaning, not liquid or aerosol cleaners. • Do not use your printer near water or spill any liquid on it. • Do not place the printer on an unstable cart, stand, table or other surface that may allow the printer to fall. • Do not block any slots or opening
Resumen del contenido incluido en la página 6
l If you use an extension cord, make sure that the total of the ampere ratings on the products plugged into the extension cord does not exceed the extension cord’s ampere rating. Also, make sure that the total of all products plugged into the wall outlet does not exceed 15 amperes. • Never push objects of any kind into your printer because they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. l Except as specifically explained in this u
Resumen del contenido incluido en la página 7
Safety Information Laser Safety This printer is certified as a Class 1 laser product under the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968. This means that the printer does not produce hazardous laser radiation. Since radiation emitted by the laser is completely confined within protective housings and external covers, the laser beam cannot escape from the machine during any phase of user o
Resumen del contenido incluido en la página 8
Your printer is a Class 1 laser product as defined in IEC 825 specifications. The label shown below is attached in countries where required. Internal Laser Radiation x -4 Max. Radiation Power _................ 5.7 10 (W) Wave Length ....................................... 780 nm This is a Class IIIb Laser Diode Assay that has an invisible laser beam. The print head unit is NOT A FIELD SERVICE ITEM. Therefore, the print head unit should not be opened under any circumstance. Ozone Emission During
Resumen del contenido incluido en la página 9
Contents Introduction Chapter 1 Setting Up Finding a Place for the Printer.. ............................................ 1-2 Unpacking ................................................................................ 1-5 1-8 Assembling .............................................................................. 1-21 Turning On the Printer .......................................................... Chapter 2 Testing and Connecting Your Printer 2-2 The Control Panel...............................
Resumen del contenido incluido en la página 10
Chapter 5 Maintenance and Transportation 5-2 Replacing Consumable Parts ................................................. 5-14 Cleaning the Printer ............................................................... 5-22 Transporting Your Printer ..................................................... Chapter 6 Troubleshooting and Error Messages.. ................................................... 6-2 Status Directory.. ................................................... 6-9 Troubleshooting 6-11 Pape
Resumen del contenido incluido en la página 11
Appendix A Technical Specifications A-2 ............................................................. Printer Specifications A-8 Interface Specifications.. ........................................................ Initialization.. .......................................................................... A-15 A-16 Option Specifications ............................................................ Shared Printer Language ....................................................... A-18 Appendix B HP Emu
Resumen del contenido incluido en la página 12
Introduction The EPL-8000 is the latest in Epson’s advanced line of laser printers, combining high performance and reliability with a wide range of features. The printer combines a semiconductor laser with the electrophotographic technology used in office copiers to give you high-quality printing that is both fast and quiet. The imaging system used by the printer is driven by a powerful processor that allows the printer to compose an entire page in internal memory before printing. The printer ca
Resumen del contenido incluido en la página 13
introduction ® Two Epson ESC/P emulation modes for the compatibility with the range of applications written for Epson 9-pin and 24-pin printers. 1 megabyte (MB) of standard random access memory (RAM) built-in, expandable up to 7.5MB for graphics printing and for using three interfaces at the same time when you add an optional interface. ® Two built-in interfaces: Centronics parallel and RS-232C or RS-422 serial. You can also install an optional interface and use it as a third channel for data
Resumen del contenido incluido en la página 14
Introduction Options Many printer options are available for your printer. For detailed information on the installation and use of these options, see Chapter 7. The last figure in option part numbers, represented by an asterisk (*), varies by country. Contact your local dealer for the part number in your country. The lower paper cassette unit (C81228*) This optional lower paper cassette unit (model L) fits directly beneath the printer and houses the adjustable paper cassette. You can load up to 2
Resumen del contenido incluido en la página 15
Introduction The face-up output tray (C81227*) The face-up output tray allows the printer to deliver paper face-up for immediate viewing of your printed output. Use the face-up output tray for printing that requires a straight-through paper path, such as labels and overhead transparencies. IC cards Two identity cards are available from your dealer. The identity cards allow your printer to use the Adobe PostScript page description language or the Epson GL graphics language, giving you additional
Resumen del contenido incluido en la página 16
Introduction Interface cards Optional interface cards are available to supplement the printer’s built-in parallel and serial interfaces. A complete list of available interfaces, guidelines for choosing the right interface and other instructions are given in Chapter 7. Interface cable Epson supplies several types of interface cables. You can use any interface cable that meets the specifications listed below. See your computer manual for additional requirements. Computer side Length connector conn
Resumen del contenido incluido en la página 17
Introduction Memory chip set (C82904*, C82905*) You can increase your printer’s current 1MB of RAM to a total of 7.5MB by installing memory chip sets and a memory expansion board. The C82904* chip set increases the printer memory by increments of 0.5MB, and the C82905* chip set can increase it by 2.0MB increments. You can install the 0.5MB chip sets on the controller board or the 0K expansion board (C82206*); you can install 2MB chip sets on the 0K expansion board only. See Chapter 7 for more in
Resumen del contenido incluido en la página 18
Laser Printer Precautions This printer uses laser technology. The following list of precautions applies whenever you open the printer cover. Even if you are familiar with other types of printers, be sure to follow these precautions carefully to ensure safe, efficient operation. Be careful not to touch the fuser, which is marked by a CAUTION HOT SURFACE label. If you have been using the printer, the fuser can be very hot. Avoid touching the components inside the printer unless instructed to do so
Resumen del contenido incluido en la página 19
Finding Your Way Around Chapter 1 contains information on unpacking and setting up your printer. Be sure to read and follow these instructions first. Chapter 2 contains information on using the control panel, testing and connecting the printer, and sharing the printer. It also describes how to set the printer mode and use printer selection menus. For detailed information on the SelecType options, see Chapter 3. Chapter 4 contains the information on paper handling. Make sure you read this chapter
Resumen del contenido incluido en la página 20
Finding Your Way Around Warnings, Cautions, and Notes WARNINGS: must be followed carefully to avoid bodily injury. CAUTIONS: must be observed to avoid damage to your equipment. Notes: contain important information and useful tips on the operation of your printer. Where to Get Help for United States Users Epson America provides local customer support and service through a nationwide network of authorized Epson dealers and Service Centers. Epson also provides the following support services through
