Resumen del contenido incluido en la página 1
DOT MATRIX PRINTER
MODEL iDP3550/3551
User’s Manual
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
iDP3550/3551 User’s Manual Declaration of Conformity This printer conforms to the following Standards: Low Voltage Directive 73/23/EEC, 93/68/EEC and the EMC Directive 89/336/EEC, 92/31/EEC, 93/68/EEC. LVD : EN60950 EMC : EN55022 Class A EN61000-3-2 EN61000-3-3 EN55024 This declaration is applied only for 230V model. Warning : This is a Class A products. In a domestic environment this product may cause radio interference in which case the user may be required to tak
Resumen del contenido incluido en la página 4
iDP3550/3551 User’s Manual IMPORTANT SAFETY INSTRUCTIONS • Read all of these instructions and save them for future reference. • Follow all warnings and instructions marked on the product. • Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. • Do not use this product near water. • Do not place this product on an unstable cart, stand or table. The product may fall, causing serious damage to the product. • Slots and openin
Resumen del contenido incluido en la página 5
iDP3550/3551 User’s Manual WICHTIGE SICHERHEITSANWEISUNGEN • Lesen Sie die nachfolgenden Anweisungen sorgfältig durch und bewahren Sie sie auf. • Befolgen Sie alle auf dem Drucker vermerkten Hinweise und Anweisungen. Vor dem Reinigen grundsätzlich Stecker aus der Steckdose ziehen. Keine Flüssigkeiten oder Aerosolreiniger benutzen. Nut mit einem feuchten Tuch abwischen. • Der Drucker darf nicht in der Nähe von Wasser aufgestellt werden. • Drucker nicht auf einem unstabilen Wagen, Stand oderTisch
Resumen del contenido incluido en la página 6
iDP3550/3551 User’s Manual IMPORTANT: This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 off FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of th
Resumen del contenido incluido en la página 7
iDP3550/3551 User’s Manual 1. Prior to using the equipment, be sure to read this User's Manual thoroughly. Please keep it handy for reference whenever it may be needed. 2. The information contained herein may be changed without prior notice. 3. Reproduction of part or all of this User's Manual without permission is strictly prohibited. 4. Never service, disassemble, or repair parts that are not mentioned in this User's Manual. 5. Note that we will not be responsible for damages attrib
Resumen del contenido incluido en la página 8
iDP3550/3551 User’s Manual SAFETY PRECAUTIONS ----- BE SURE TO OBSERVE In order to prevent hazards to an operator or other persons and damage to property, be sure to observe the following precautions. • The following describes the degrees of hazard and damages that can occur if the given instructions are neglected or the equipment is incorrectly operated. WARNING Negligence of this precaution may result in death or serious injury. CAUTION Negligence of this precaution may result in injury or dam
Resumen del contenido incluido en la página 9
iDP3550/3551 User’s Manual WARNING • Never handle the equipment in the following manners, as it may break, become out of order, or overheat causing smoke and resulting in fire or electric shock. If the equipment is used in an abnormal condition, such as when broken, then problems, smoke emission, abnormal odor/noise, and fire can result. If an abnormal condition exists, be sure to turn off the power, disconnect the power plug from a plug socket, and contact our dealer. Never repair the equipment
Resumen del contenido incluido en la página 10
iDP3550/3551 User’s Manual PRECAUTIONS FOR INSTALLATION • Do not use or store the equipment in a place exposed to fire, moisture, or direct sunlight, or in a place near a heater or a thermal device where the prescribed operating temperature and humidity are not met, or in a place exposed to much oil, iron powder, or dust. The equipment may become out of order, emit smoke, or catch fire. • Do not install the equipment in a place like a laboratory where chemical reactions are expected, or in a pla
Resumen del contenido incluido en la página 11
iDP3550/3551 User’s Manual PRECAUTIONS FOR HANDLING Do not handle the equipment in the following manners, because problems may result. • Do not print when there is no recording paper or ink ribbon set in the equipment. The print head may be damaged • Be careful not to drop foreign substances, such as clips, pins, and screws, into the main body. • Do not spill any liquid or spray any chemical-containing liquid over the equipment. • Do not stamp on, drop, hit, or give a strong shock to the equipme
Resumen del contenido incluido en la página 12
iDP3550/3551 User’s Manual DAILY MAINTENANCE • Prior to starting maintenance work, be sure to turn off the main body. • Use a dry soft cloth to wipe off stains and dust from the surfaces of the main body case. For severe soiling, dip the cloth in water and wring it, for wiping off the soil. Never use organic solvents, such as alcohol, thinner, trichlene, benzene, ketone, or chemical dusters. • If the equipment is contaminated with paper powder, use a soft brush to clean it. CITIZEN
Resumen del contenido incluido en la página 13
iDP3550/3551 User’s Manual CONTENTS 1. OUTLINE .............................................................................................................................................................. 1 1.1 Features ......................................................................................................................................................... 1 1.2 Unpacking .............................................................................................................
Resumen del contenido incluido en la página 14
iDP3550/3551 User’s Manual 6. PRESET JUMPER SETTING........................................................................................................................... 25 6.1 Location of Preset Jumper............................................................................................................................ 25 6.2 Preset Jumper Table ..................................................................................................................................... 25 7. M
Resumen del contenido incluido en la página 15
iDP3550/3551 User’s Manual 12. WINDER CONNECTOR ................................................................................................................................. 40 12.1 Specifications of Winder Connector ............................................................................................................. 40 12.2 Connector's Pin Configuration...................................................................................................................... 40 12.3 Drive
Resumen del contenido incluido en la página 16
iDP3550/3551 User’s Manual <<< German >>> 4. BETRIEB........................................................................................................................................................... 139 4.1 Druckerabdeckung Aufsetzen, Entfernen......................................................................................................... 139 4.2 Anschluß des Schnittstellenkabels ..........................................................................................
Resumen del contenido incluido en la página 17
iDP3550/3551 User’s Manual 1. OUTLINE This is a small-size dot impact printer developed for various data communication terminals, POS terminals, kitchen-use printers, and so on. Its abundant built-in features allow you to widely use this printer for different applications. Prior to using it, read and understand this manual thoroughly. 1.1 Features (1) Small size, light weight, and low price (2) High-speed print (Bi-directional) (3) Red and black print (4) Very easy paper loading by the auto load
Resumen del contenido incluido en la página 18
iDP3550/3551 User’s Manual 2. BASIC SPECIFICATIONS 2.1 Model Classifications The printer model is classified by the following designation method. iDP3550 - F 40 R F 120 C Type C: Character Type (DP-650 Printer Mechanism) (DP-652 Printer Mechanism) (DP-654 Printer Mechanism) G: Graphic Type (DP-657 Printer Mechanism) Supply Voltage 120: For 120 V AC 230: For 230 V AC Character Set F: International Interface • CBM Mode R: Serial (RS-232C) P: Parallel (CENTRONICS Compliant) • Star Mode S: Serial (R
Resumen del contenido incluido en la página 19
iDP3550/3551 User’s Manual 2.2 Basic Specifications Model iDP3550-F*RF/PF iDP3551-F*RF/PF iDP3550-P*RF/PF iDP3550-F*SF/CF iDP3551-F*SF/CF iDP3550-P*SF/CF Item iDP3550-F*TF/IF iDP3551-F*TF/IF iDP3550-P*TF/IF Character type : DP-650 series / DP-652 series / DP-654 series (CITIZEN) Printer mechanism Graphic type : DP-657series (CITIZEN) Serial dot impact method (Bidirectional print) Print method 2-pass graphic (Unidirectional print) DP-650 series: 57.3 mm / 23 columns Print width DP-652 series: 58.
Resumen del contenido incluido en la página 20
iDP3550/3551 User’s Manual Model iDP3550-F*RF/PF iDP3551-F*RF/PF iDP3550-P*RF/PF iDP3550-F*SF/CF iDP3551-F*SF/CF iDP3550-P*SF/CF Item iDP3550-F*TF/IF iDP3551-F*TF/IF iDP3550-P*TF/IF Winder Special purpose winder AW-3-E (Option) that will be placed separately. Supply voltage 120 V AC +/- 10 %, 50/60 Hz 230 V AC +/- 10 %, 50/60 Hz Power consumption Not printing: Approx. 10 W, Printing: Approx. 30 W Weight Approx. 2.8 kg Approx. 3 kg Approx. 2.8 kg Outer dimensions 160 · 212 · 173 mm 160 · 212 ·
