Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
CBM-253 User’s Manual Declaration of Conformity Manufacturer’s Name : Japan CBM Corporation Manufacturer’s Address: CBM Bldg., 5-68-10, Nakano, Nakano-ku Tokyo, 164-0001, Japan Declare the Product Product Name: Thermal Label Printer Model Number(s): CBM-253 Series (CBM-253P, CBM-253R) (S.No.60400000 ~ ) Conform to the following Standards: LVD: EN60950 : 1992+A1+A2:1993 EMC: EN55022 : 1994 Class B EN61000-3-2 : 1995 EN61000-3-3 : 1995 EN50082-1 :
Resumen del contenido incluido en la página 3
CBM-253 User’s Manual IMPORTANT SAFETY INSTRUCTIONS • Read all of these instructions and save them for future reference. • Follow all warnings and instructions marked on the product. • Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. • Do not use this product near water. • Do not place this product on an unstable cart, stand or table. The product may fall, causing serious damage to the product. • Slots a
Resumen del contenido incluido en la página 4
CBM-253 User’s Manual IMPORTANT: This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 off FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of
Resumen del contenido incluido en la página 5
CBM-253 User’s Manual 1. Before using the equipment, be sure to read this User's manual thoroughly . 2. Portions of the contents of this User's manual may be changed without prior notice. 3. The reproduction of part or all of the contents of this User's manual without permission is strictly forbidden. 4. Absolutely do not carry out maintenance, disassembly, or repair of parts that are not specified in this User's manual. 5. Note that losses which may be attributed to the cus
Resumen del contenido incluido en la página 6
CBM-253 User’s Manual CAUTIONS FOR SAFE USE (Be sure to follow these cautions) The cautions that must be followed in order to prevent injury to persons using this equipment or to other persons, and to protect against damage to property are displayed as shown below. • The danger of injury or damage resulting from mistaken methods of use and not following the displayed cautions will be explained as follows: The WARNING symbol indicates that if the methods of use is mistaken by
Resumen del contenido incluido en la página 7
CBM-253 User’s Manual WARNING ! • Do not install this equipment in locations with poor ventilation, and do not use the equipment in such a way that the ventilation port is obstructed, since these actions may result in fire or electric shock. • Do not use this equipment in locations such as laboratories in which chemical reactions take place, or in locations in which the air includes salt or toxic gases, since these actions may result in fire or electric shock. • Do not use this equ
Resumen del contenido incluido en la página 8
CBM-253 User’s Manual WARNING ! • Do not spill drinks such as tea, coffee or juice, or spray anti-mosquito preparations, etc. onto the equipment, since these actions will result in breakdowns, fire or electric shock. If water, etc. has been spilled into the equipment, switch off the power, remove the power plug from the mains outlet, and contact your sales shop. • Do not attempt to disassemble or modify this equipment, since these actions will cause fire or electric shock. • The
Resumen del contenido incluido en la página 9
CBM-253 User’s Manual CAUTION • Do not touch the print head or motor immediately after printing, since these parts will be very hot and there will be a danger of burning your hand. CITIZEN
Resumen del contenido incluido en la página 10
CBM-253 User’s Manual CAUTION • Do not place objects on top of this equipment. since there will be a danger of the objects falling off or falling over, resulting in injury. • Do not use or store this equipment in locations that have fire or moisture, in locations that are subject to direct sunlight, in locations that are abnormally hot such as close to heating equipment, or in locations that are very humid or dusty, since t his will be a cause of breakdowns. CITIZEN
Resumen del contenido incluido en la página 11
CBM-253 User’s Manual CONTENTS 1. OUTLINE...................................................................................................................................................1 1. 1 Features .............................................................................................................................................1 1. 2 Cautions for installation....................................................................................................................1
Resumen del contenido incluido en la página 12
CBM-253 User’s Manual 5. INTERFACE SPECIFICATIONS.........................................................................................................26 5.1 Serial interface ................................................................................................................................26 5.2 Parallel interface .............................................................................................................................28 6. DRAWER KICK-OUT CONNECTOR........
Resumen del contenido incluido en la página 13
CBM-253 User’s Manual 1. OUTLINE This printer is a thermal line printer that is capable of being widely used with various types of data communication terminals, POS terminals. or kitchen printers, etc. Because this printer uses a thermal line printings systems, high speed printing is possible Furthermore, this printer may be widely utilized for various applications due to the incorporation of ample functions. 1. 1 Features • Small size and light weight. • High speed printing. (400 dot
Resumen del contenido incluido en la página 14
CBM-253 User’s Manual 5. This equipment should not be installed in locations where the air contains salt or toxic gases. 6. Install the printer on a flat, stable table top in a location having good ventila-tion. (Ensure that the ventilation holes are not blocked.) 7. Items should not be placed on top of this equipment. 8. Note that the use of this equipment close to a radio or television receiver, or sharing the same power source outlet may cause reception problems in the radio or televisi
Resumen del contenido incluido en la página 15
CBM-253 User’s Manual 8. Do not spill liquids or spray chemicals, etc. onto this equipment. 9. Do not subject this equipment to strong shock or vibration by standing on it. dropping it, hitting it, etc. 10. Carry out the operation of the operating panel unit with care, since disordered operation will become a cause of breakdowns and mistaken operation. Furthermore, absolutely do not operate the panel using sharp objects such as the tip of a pen etc. 11. During operation, do not touch movin
Resumen del contenido incluido en la página 16
CBM-253 User’s Manual 2. BASIC SPECIFICATIONS 2.1 Model classifications CBM - 253 - **** **** **** **** D: Drawer kick connecter is equipped None: Not equipped Power source voltage 120: AC 120V, 230: AC 230V Character set F: International characters interface R: Serial, P: Parallel 2.2 Printing specifications Printing method Direct heat coloring system (Direct thermal) Printing direction Line feeding by friction feeding Effective printing area Effect
Resumen del contenido incluido en la página 17
CBM-253 User’s Manual Printing speed 400 dot lines/second (Approximately 11 lines/second when the line feeding amount is l/6 inch.) However, depending on the combination of the communication time, data, and control codes, the printing speed may be slower. Paper feeding speed 50 mm/second (Approximately 11 lines/second when the line feeding amount is 1/6 inch.) Line feeding pitch l/6 inch (Default value) Possible to change the pitch using the control codes (Minimum width 1/20
Resumen del contenido incluido en la página 18
CBM-253 User’s Manual Number of columns Double wide Standard size Double height Double wide and height 37 37 18 18 Font 1 35 35 17 17 49 49 24 24 Font 2 47 47 23 23 (Spaces between the characters are not included) The figures on the top line show the situation when thermal paper is selected, and the figures on the bottom line show the situation when thermal label paper is selected. 6 CITIZEN
Resumen del contenido incluido en la página 19
CBM-253 User’s Manual Available bar codes UPC-A, UPC-E, JAN- 13 (EAN), JAN-8 (EAN), CODE 39, ITF, CODABAR, CODE 128 Type Printing samples Features This is a fixed-length bar code that is UPC-A composed of 12 figures of numerals only. This is a fixed-length bar code that is composed of 8 figures of numerals UPC-E only. This bar code is a shortened version of UPC-A. This is a fixed-length bar code that is JAN- 13 composed of 13 figures of numerals only. This is a fixed
Resumen del contenido incluido en la página 20
CBM-253 User’s Manual 2.4 Paper specifications Specified paper (Roll paper) Thermal paper 0 Paper width : 60.0 mm– mm 1 Paper thickness : 65– 5μm Diameter of paper roll : f 83 mm maximum Recommended paper : TF50KS-EY Nihon Seishi Co., Ltd. : TF50KS-E2C Nihon Seishi Co., Ltd. Roll paper core : Internal diameter f 12.0 mm : External diameter f 18.0 mm * Absolutely do not stick the paper to the core. * The printing surface should be outside. Printing area Thermal labe
