Manual de instrucciones de APC MODULAR RACK-MOUNT POWER 990-3051C-001

Resumen del contenido incluido en la página 1

Inventory Installation
Item Part Number Quantity How to install the PDU
Install the mounting rails in the enclosure by using the screws
1
Modular rack-mount PDU 138 KW 0G-PDPM138H-5U 1 provided. The PDU requires a 5U space from the top of the
200 A 400 V 18 Pole 5U and enclosure.
0G-PDPM72F-5U
Installation
Literature kit rack-mount PDU 0L 1532 1
1
Modular Rack-Mount Power Label kit rack-mount PDU 0M-8909
5 U
Distribution Unit
Rail stationary black 870-8197D-001 2
Rail adjustable black 870-8198

Resumen del contenido incluido en la página 2

Install input cables Input cables Communication cables Connect one end of the communication cable to the port on the back of Enlarge the knock out hole for larger conduit Loosen the seven screws and remove the back panel to gain access to the unit and the other to the local area network. 1 the compression terminals (the top and bottom cover plates can be removed if necessary for easier access). Note: The cutout on the top (or bottom) cover plate may need to be enlarged depending on the in

Resumen del contenido incluido en la página 3

Table 2 Table 4 Specifications AC Output 200 A, Conductors Input conductors Copper, XLPE Aluminum, This product is rated 200 A. It should be supplied with a circuit breaker Nominal voltage 230 V/400 V 3 PH Copper, PVC or EPR Aluminum, XLPE or ERP with a maximum rating of 200 A. 120 V/208 V 3PH Install. Insulation, Insulation, PVC Insulation, Insulation, Method 30°C Ambient 30°C Ambient 30°C Ambient 30°C Ambient For North America, if supplied by a 200 A circuit breaker, it is Maximum continuo

Resumen del contenido incluido en la página 4

Physical Dimensions, Environment and Regulatory Agency Approval Compliance This equipment has been tested and found to comply with the limits for a Class Physical Dimensions A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference, when Dimensions (HxWxD) Unit: 229 x 457 x 737 mm (9 x 18 x 29 in) the equipment is operated in a commercial environment. This equipment Shipping: 406 x 610 x 889 mm (16.5 x 24