Manual de instrucciones de Tripp Lite SmartPro SMART5000RT3U

Resumen del contenido incluido en la página 1

Tripp Lite

1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com
Model #: SMART5000RT3U
SmartPro Expandable Rack/Tower UPS System - Line-interactive, sine wave power management system for
networks

Highlights
5000VA / 5kVA line interactive, extended-run 6U rack / tower UPS (3U Power
Module + 3U Battery Pack)
Maintains sine-wave 208V and simultaneous 120V nominal output during
brownouts to 151 and overvoltages to 260V
Network communications sup

Resumen del contenido incluido en la página 2

Line-interactive voltage regulation corrects severe brownouts and overvoltages without using battery power Dual voltage output is simultaneously compatible with both 208V and 120V equipment 14 total outlets (120V: 10 x 5-15R, 2 x 5-20R/208V: 1 x L6-30R, 1 x L14-30R) Diagnostic LEDs provide visual indication of 17 separate performance conditions Included PowerAlert Software provides e-mail notification of power problems and simultaneous automatic unattended shutdown of multiple servers 4 built-in

Resumen del contenido incluido en la página 3

DC system 48V DC voltage Typical battery 3-6 years, depending on usage lifespan Battery recharge 2-4 hours to 90% rate VOLTAGE REGULATION Voltage Line-interactive UPS offers 2 boost levels of brownout correction and a single level of overvoltage adjustment to maintain regulation usable, computer grade output without consuming battery power description Overvoltage Input voltages between 240V and 260V AC are reduced by 12% correction Direct pass Input voltages between 200V and 239V AC are passed t

Resumen del contenido incluido en la página 4

Storage +5 to +122 degrees Fahrenheit Temperature Operating +32 to +104 degrees Fahrenheit Temperature COMMUNICATIONS Network 4 built-in monitoring ports, 2 xUSB & 2 x DB9. Each supports on battery, low battery, power restored, AC line voltage, DC monitoring port battery voltage, load percentage, battery charge current, battery capacity, internal UPS temperature and line frequency status messaging. Interface supports timed inverter shutoff after unattended shutdown, activate self-test and 10 sec

Resumen del contenido incluido en la página 5

SNMP Accessories ENVIROSENSE Monitors temperature, humidity and contact-closure inputs. (Requires SNMPWEBCARD or Qty: [optional] switched PDU.) SNMPWEBCARD For remote monitoring and control via SNMP, Web or telnet. Qty: [optional] Start-Up/Warranty Services W02-BW0 Regular business hours start-up, excludes on-site warranty. Qty: [optional] W02-BW2-1BD Regular business hours start-up and two year on-site, next business day break/fix Qty: [optional] warranty service for locations within 350 m