Manual de instrucciones de Tripp Lite OMNI1500LCD

Resumen del contenido incluido en la página 1

Owner’s Manual
SMART1200LCD, SMART1500LCD &
OMNI1500LCD
Not suitable for mobile applications.
English Español Français
5 9
1
Important Safety Instructions
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that should be followed during the installation, operation and storage of all Tripp Lite UPS Systems.
Failure to heed these warnings may affect your warranty.
UPS Location Warnings
• The UPS is designed for indoor use only in a controlled environment, away from excess mo

Resumen del contenido incluido en la página 2

Quick Installation A STEP 1: To install the UPS in a 4-post rack, attach the included mounting hardware to the UPS as shown in diagram . To B mount the UPS in a 2-post rack, attach the included hardware to the UPS as shown in diagram . Then, using an assistant if necessary, lift the UPS and attach it to a standard rack or rack enclosure with user-supplied hardware. Caution: If the UPS is installed in a rack, allow at least 0.75 in. (2 cm) clearance above and below the unit. If the UPS is plac

Resumen del contenido incluido en la página 3

Basic Operation (Front Panel) continued 3 LCD Display The LCD Display indicates a variety of UPS operational conditions. All descriptions apply when the UPS is plugged into an AC outlet and turned on. The LCD Display can be rotated for easy viewing, regardless of whether the UPS is in a horizontal or vertical (“tower”) position. To rotate the display, insert a small tool in the slots on the sides of the display to pop it out of the UPS housing; rotate the display, and snap it back into the

Resumen del contenido incluido en la página 4

Basic Operation (Rear Panel) continued 9 Power Sensitivity Dial: This dial is normally set fully counterclockwise, which enables the UPS to protect against waveform distortions in its AC input. When such distortion occurs, the UPS will normally switch to providing PWM sinewave power from its battery reserves for as long as the distortion is present. In some areas with poor utility power or where the UPS's input power comes from a backup generator, frequent brownouts and/or chronic waveform d