Manual de instrucciones de ETA Systems ETA-ECM20M

Resumen del contenido incluido en la página 1

ETA-ECM20 & ETA-ECM20M
Electrical Control Module 20A Power Conditioner
ETA-ECM20 & ETA-ECM20M
Electrical Control Module 20A Power Conditioner
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 1 – ETAsys.com
Specifications are subject to change without notice.

Resumen del contenido incluido en la página 2

ETA-ECM20 & ETA-ECM20M Electrical Control Module 20A Power Conditioner INTRODUCTION Thank you for purchasing the ETA Systems Electrical Control Module Raceway system. This information sheet is an overview of the ETA-ECM20 and ETA-ECM20M control modules. Note: For your safety all electrical wiring must be done by a qualified electrician. The ETA Systems ETA-ECM20 and ETA-ECM20M are an Electrical Control Module (ECM) 20A Power Conditioner and AC Spike Suppressor that are designed to be used as a

Resumen del contenido incluido en la página 3

ETA-ECM20 & ETA-ECM20M Electrical Control Module 20A Power Conditioner 6 6 4 4 1 1 3 3 2 5 2 MODULE PANEL FEATURES WIRING THE ETA-ECM20M MODULE 1. Trigger / Status Port Pin Identification – All signals are of The ETA-ECM20M is designed to be mated with the low voltage and current. DO NOT MISWIRE or damage may ETA-RACEWY6 housing and the ETA-ECS6RM controller. The occur. specific job install AC power requirements and power distribution + Requires 5 -24VDC to activate

Resumen del contenido incluido en la página 4

ETA-ECM20 & ETA-ECM20M Electrical Control Module 20A Power Conditioner ETA-ECM20, ETA-ECM20M SPECIFICATIONS General Type: Power Conditioner Suppressor Module Power Requirements: 120V 60Hz Power Consumption: .5W RoHS Compliant: Yes Safety Approval: MET (UL 1449 Code) Panel Switched Outlets: Two, 20A Spike & Surge Suppression: H-N, N-G, H-G Manual Override: Slide switch Extreme V oltage Shutdown: ET A-ECM20M Model only , (EVS) Below 102V or Above 132V