Resumen del contenido incluido en la página 1
Loading binary presets into your Martin Audio DX2
Loudspeaker Management System
Clicking here takes you to a zip folder containing the loader software and binary files.
Extract these to your hard disk. Do not run the programme from the zip folder.
Warnings
Loading presets will overwrite previously loaded factory presets - and any
changes to them (e.g. channel gain, delay, limiter settings).
To make a permanent record of changes to the user-editable parts of a preset,
you m
Resumen del contenido incluido en la página 2
You will need a 9 pin male-to-female, fully wired, pin-to-pin RS232 cable (not the null modem type). To load the latest presets into your DX2 1) Connect the 9-pin male to 9-pin female DEE type serial lead from your computer to the external socket on the back of the unit. Note: this lead should be pin-to-pin - not be of the null modem type. 2) On the DX2 use the blue Menu, Back, Next and Enter keys to go into the Interface Sub-menu and then into External Interface. 3) Once ent
Resumen del contenido incluido en la página 3
If necessary, browse to find the files you extracted earlier. Click on the preset required (to highlight it) and click Open. The programme will attempt to communicate with the DX2. If the Com number (or Speed settings set in 3 above) are not the same as the DX2 parameters, you will see something like this… Make sure the Baud rate (Speed) matches the unit to be loaded! Try adjusting the Com (Serial Port) number and clicking the Connect button again. It is usually quicker to d
Resumen del contenido incluido en la página 4
click OK. You’ll see the block writing progress bar proceeding from left to right and you’ll see the DX2 screen graphics shuffling from right to left… … followed by an indicator test (all LEDs on)… … a short delay… … and then a wake-up procedure. Selecting a particular preset Note that each binary file will load a family of presets into your DX2. Choose the required preset as follows: 1) Press the blue Menu button, then the Back and Next buttons to find the
Resumen del contenido incluido en la página 5
Note that the DX2 will default to its previous condition if the above operations are not completed and no buttons are pressed for 20 – 30 seconds. Amplifier power, amplifier gain and limiter settings We suggest you specify an amplifier capable of meeting the loudspeaker’s peak power rating – as long as you use the correct Martin Audio limiter recommendations. The limiter parameters protect the loudspeaker from long- term overloads whilst the correct amplifier specification protects th
Resumen del contenido incluido en la página 6
DX2 presets and controller o/p channel allocations Notes Many critical Martin Audio factory presets are locked to comply with warranty conditions and some inter-driver delays are lock-linked to enable delay tracking. Non-critical parameters (e.g. HF equalisation that may need to be adjusted as humidity changes) are left unlocked for user adjustment. You may use the following parameters to create your own unlocked user- presets but please be aware that alterations to critical – nor
Resumen del contenido incluido en la página 7
LE1200 active for 32dB amps Format: 4 x 2 Way Crossover Name: 4 x 2-way LE1200 Output [1] Low A (Source = Input A) Highpass: 35.1Hz 24dB Link/Riley Lowpass: 1k17Hz 24dB Link/Riley Gain: +0.0dB Delay: 0.2500 mS [Linked to Output 2] Limiter: Attack: 23mS Release: x16 at +3dB Clip Limiter: Fast at 12dB above Limiter PEQ 1 PEQ 2 PEQ 3 PEQ 4 PEQ 5 PEQ 6 PEQ 7 PEQ 8 PEQ 9 Freq. 75.8Hz 1k00Hz 1k00Hz 1k00Hz 1k00Hz 1k00Hz 1k00Hz 1k00Hz 1k00Hz Q 1.00 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 Gain +4.5dB
Resumen del contenido incluido en la página 8
LE1200 passive for 32dB amps Format: 4 x 2 Way Crossover Name: 8 x LE1200 Output [1] FR A1 (Source = Input A) Highpass: 35.1Hz 24dB Link/Riley Lowpass: >32k0Hz 24dB Link/Riley Gain: +0.0dB Delay: 0.0000 mS Limiter: Attack: 23mS Release: x16 at +4dB Clip Limiter: Fast at 12dB above Limiter PEQ 1 PEQ 2 PEQ 3 PEQ 4 PEQ 5 PEQ 6 PEQ 7 PEQ 8 PEQ 9 Freq. 75.8Hz 1k00Hz 13k2Hz 1k00Hz 1k00Hz 1k00Hz 1k00Hz 1k00Hz 1k00Hz Q 1.5 3.0 1.8 3.0 3.0 3.0 3.0 3.0 3.0 Gain +3.0dB +1.0dB +4.0dB +0.0dB
Resumen del contenido incluido en la página 9
LE1500 active for 32dB amps Format: 4 x 2 Way Crossover Name: 4 x 2-way LE1500 Output [1] Low A (Source = Input A) Highpass: 24.8Hz 24dB Link/Riley Lowpass: 1k17Hz 24dB Link/Riley Gain: +0.0dB Delay: 0.1019 mS [Linked to Output 2] Limiter: Attack: 23mS Release: x16 at +5dB Clip Limiter: Fast at 12dB above Limiter PEQ 1 PEQ 2 PEQ 3 PEQ 4 PEQ 5 PEQ 6 PEQ 7 PEQ 8 PEQ 9 Freq. 70.2Hz 218Hz 303Hz 454Hz 1k00Hz 1k00Hz 1k00Hz 1k00Hz 1k00Hz Q 1.00 1.00 3.0 1.00 3.0 3.0 3.0 3.0 3.0 Gain +4.5d
Resumen del contenido incluido en la página 10
LE1500 passive for 32dB amps Format: 4 x 2 Way Crossover Name: 8 x LE1500 Output [1] FR A1 (Source = Input A) Highpass: 24.8Hz 24dB Link/Riley Lowpass: >32k0Hz 24dB Link/Riley Gain: +0.0dB Delay: 0.0000 mS Limiter: Attack: 23mS Release: x16 at +6dB Clip Limiter: Fast at 12dB above Limiter PEQ 1 PEQ 2 PEQ 3 PEQ 4 PEQ 5 PEQ 6 PEQ 7 PEQ 8 PEQ 9 Freq. 70.2Hz 454Hz 13k2Hz 1k00Hz 1k00Hz 1k00Hz 1k00Hz 1k00Hz 1k00Hz Q 1.00 1.00 2.0 3.0 3.0 3.0 3.0 3.0 3.0 Gain +4.0dB +1.5dB +2.5dB +0.0d
Resumen del contenido incluido en la página 11
LE2100 active for 32dB amps Format: 4 x 2 Way Crossover Name: 4 x 2-way LE2100 Output [1] Low A (Source = Input A) Highpass: 20.1Hz 24dB Link/Riley Lowpass: 606Hz 24dB Link/Riley Gain: +0.0dB Delay: 0.3021 mS [Linked to Output 2] Limiter: Attack: 32mS Release: x16 at +5dB Clip Limiter: Fast at 12dB above Limiter PEQ 1 PEQ 2 PEQ 3 PEQ 4 PEQ 5 PEQ 6 PEQ 7 PEQ 8 PEQ 9 Freq. 80.3Hz 405Hz 1k00Hz 1k00Hz 1k00Hz 1k00Hz 1k00Hz 1k00Hz 1k00Hz Q 1.00 1.5 3.0 3.0 3.0 3.0 3.0 3.0 3.0 Gain +4.5dB
Resumen del contenido incluido en la página 12
XTA Electronics Ltd DP448 Library File LM_WMX03_448v4.xbl 17:19 11.Oct.2007 1W8LM + WMX Stereo Format: Free Assignment Name: 1LM + WMX ST Output [1+3] LM L LF (Source = Input A) Highpass: 70.2Hz 24dB Link/Riley Lowpass: 2k12Hz 24dB Link/Riley Gain: +0.0dB Delay: 0.1019 mS [Linked to Output 2] Limiter: Attack: 16mS Release: x16 at +4dB Clip Limiter: Fast at 12dB above Limiter PEQ 1 PEQ 2 PEQ 3 PEQ 4 PEQ 5 PEQ 6 PEQ 7 PEQ 8 PEQ 9 Freq. 90.1Hz 618Hz 1k00Hz 1k00Hz 1k00Hz 1
Resumen del contenido incluido en la página 13
XTA Electronics Ltd DP448 Library File LM_WMX03_448v4.xbl 17:20 11.Oct.2007 2W8LM + WMX Stereo Format: Free Assignment Name: 2LM + WMX ST Output [1+3] LM L LF (Source = Input A) Highpass: 70.2Hz 24dB Link/Riley Lowpass: 2k12Hz 24dB Link/Riley Gain: +0.0dB Delay: 0.1019 mS [Linked to Output 2] Limiter: Attack: 16mS Release: x16 at +4dB Clip Limiter: Fast at 12dB above Limiter PEQ 1 PEQ 2 PEQ 3 PEQ 4 PEQ 5 PEQ 6 PEQ 7 PEQ 8 PEQ 9 Freq. 90.1Hz 618Hz 1k00Hz 1k00Hz 1k00Hz 1
Resumen del contenido incluido en la página 14
XTA Electronics Ltd DP448 Library File LM_WMX03_448v4.xbl 17:20 11.Oct.2007 4W8LM + WMX High Curve Stereo Format: Free Assignment Name: 4LM+WMX HCrvST Output [1+3] LM L LF (Source = Input A) Highpass: 70.2Hz 24dB Link/Riley Lowpass: 2k12Hz 24dB Link/Riley Gain: +0.0dB Delay: 0.1019 mS [Linked to Output 2] Limiter: Attack: 16mS Release: x16 at +4dB Clip Limiter: Fast at 12dB above Limiter PEQ 1 PEQ 2 PEQ 3 PEQ 4 PEQ 5 PEQ 6 PEQ 7 PEQ 8 PEQ 9 Freq. 90.1Hz 618Hz 1k33Hz 1k00
Resumen del contenido incluido en la página 15
XTA Electronics Ltd DP448 Library File LM_WMX03_448v4.xbl 17:21 11.Oct.2007 4W8LM + WMX Low Curve Stereo Format: Free Assignment Name: 4LM+WMX LCrvST Output [1+3] LM L LF (Source = Input A) Highpass: 70.2Hz 24dB Link/Riley Lowpass: 2k12Hz 24dB Link/Riley Gain: +0.0dB Delay: 0.1019 mS [Linked to Output 2] Limiter: Attack: 16mS Release: x16 at +4dB Clip Limiter: Fast at 12dB above Limiter PEQ 1 PEQ 2 PEQ 3 PEQ 4 PEQ 5 PEQ 6 PEQ 7 PEQ 8 PEQ 9 Freq. 90.1Hz 618Hz 1k33Hz 1k00H
Resumen del contenido incluido en la página 16
XTA Electronics Ltd DP448 Library File LM_WMX03_448v4.xbl 17:21 11.Oct.2007 6W8LM + WMX High Curve Stereo Format: 2 x 3 Way + Aux Crossover Name: 6LM+WMX HCrvST Output [1+4] LM L LF (Source = Input A) Highpass: 70.2Hz 24dB Link/Riley Lowpass: 2k12Hz 24dB Link/Riley Gain: +0.0dB Delay: 0.1019 mS [Linked to Output 3] Limiter: Attack: 16mS Release: x16 at +4dB Clip Limiter: Fast at 12dB above Limiter PEQ 1 PEQ 2 PEQ 3 PEQ 4 PEQ 5 PEQ 6 PEQ 7 PEQ 8 PEQ 9 Freq. 90.1Hz 583Hz
Resumen del contenido incluido en la página 17
XTA Electronics Ltd DP448 Library File LM_WMX03_448v4.xbl 17:22 11.Oct.2007 6W8LM + WMX Low Curve Stereo Format: 2 x 3 Way + Aux Crossover Name: 6LM+WMX LCrvST Output [1+4] LM L LF (Source = Input A) Highpass: 70.2Hz 24dB Link/Riley Lowpass: 2k12Hz 24dB Link/Riley Gain: +0.0dB Delay: 0.1019 mS [Linked to Output 3] Limiter: Attack: 16mS Release: x16 at +4dB Clip Limiter: Fast at 12dB above Limiter PEQ 1 PEQ 2 PEQ 3 PEQ 4 PEQ 5 PEQ 6 PEQ 7 PEQ 8 PEQ 9 Freq. 90.1Hz 583Hz 8
Resumen del contenido incluido en la página 18
XTA Electronics Ltd DP448 Library File LM_WMX03_448v4.xbl 17:22 11.Oct.2007 8W8LM + WMX High Curve Stereo Format: 2 x 3 Way + Aux Crossover Name: 8LM+WMX HCrvST Output [1+4] LM L LF (Source = Input A) Highpass: 70.2Hz 24dB Link/Riley Lowpass: 2k12Hz 24dB Link/Riley Gain: +0.0dB Delay: 0.1019 mS [Linked to Output 3] Limiter: Attack: 16mS Release: x16 at +4dB Clip Limiter: Fast at 12dB above Limiter PEQ 1 PEQ 2 PEQ 3 PEQ 4 PEQ 5 PEQ 6 PEQ 7 PEQ 8 PEQ 9 Freq. 90.1Hz 583Hz
Resumen del contenido incluido en la página 19
XTA Electronics Ltd DP448 Library File LM_WMX03_448v4.xbl 17:22 11.Oct.2007 8W8LM + WMX Low Curve Stereo Format: 2 x 3 Way + Aux Crossover Name: 8LM+WMX LCrvST Output [1+4] LM L LF (Source = Input A) Highpass: 70.2Hz 24dB Link/Riley Lowpass: 2k12Hz 24dB Link/Riley Gain: +0.0dB Delay: 0.1019 mS [Linked to Output 3] Limiter: Attack: 16mS Release: x16 at +4dB Clip Limiter: Fast at 12dB above Limiter PEQ 1 PEQ 2 PEQ 3 PEQ 4 PEQ 5 PEQ 6 PEQ 7 PEQ 8 PEQ 9 Freq. 90.1Hz 583Hz 8
Resumen del contenido incluido en la página 20
XTA Electronics Ltd DP448 Library File LM_WMX03_448v4.xbl 17:23 11.Oct.2007 10W8LM + WMX High Curve Format: Free Assignment Name: 10LM+WMX HCrv Output [1] LM LFa (Source = Input A) Highpass: 70.2Hz 24dB Link/Riley Lowpass: 2k12Hz 24dB Link/Riley Gain: +0.0dB Delay: 0.1019 mS [Linked to Output 4] Limiter: Attack: 16mS Release: x16 at +4dB Clip Limiter: Fast at 12dB above Limiter PEQ 1 PEQ 2 PEQ 3 PEQ 4 PEQ 5 PEQ 6 PEQ 7 PEQ 8 PEQ 9 Freq. 90.1Hz 583Hz 891Hz 1k33Hz 1k00H
