Manual de instrucciones de Vivid Audio C1

Resumen del contenido incluido en la página 1

Owner’s Guide

C1 loudspeaker system






Carefully read the following instruction which contain important
information about the safe use, installation and maintenance of this
loudspeaker.

• Unpack the loudspeakers according to the prescribed method and
check for damage.
• Keep potentially hazardous packaging (plastic bags, polystyrene etc.)
out of the reach of children.
• Dispose of packaging in compliance with current waste disposal
requirements.
• This loudspeak

Resumen del contenido incluido en la página 2

IMPORTANT NOTE THE SILVER ALUMINIUM DOMED/CONED DRIVE UNITS ARE EXTREMELY SENSITIVE AND MUST NEVER BE SUBJECTED TO MISGUIDED FINGERS OR OTHER SHARP OBJECTS! IF SO CERTAIN DAMAGE WILL RESULT AND A REPLACEMENT DRIVER WILL HAVE TO BE SOUGHT. THIS REPLACEMENT WILL NOT BE CARRIED OUT UNDER GUARANTEE CONDITIONS PLEASE READ ALL PAGES PRIOR TO INSTALLATION 2

Resumen del contenido incluido en la página 3

INTRODUCTION Slide the loudspeaker towards you out of the crate (on the poly end It is indeed true that very few pieces). owners of new Hi Fi equipment CAREFULLY remove the protective read the enclosed instruction materials paying special attention manual. not to damage the drivers in the The people Vivid Audio have, in the process. light of this fact decided not to provide an instruction manual or Reassemble the packaging and user guide on this product! save for future use. Ins

Resumen del contenido incluido en la página 4

matching C1s acoustically Connect the red terminals of your designed floor stand. amplifier to the red terminals of The loudspeaker should face the your loudspeaker (by utilising the listening position. When you are red bridging wire provided). The satisfied that you have optimised black terminal of your amplifier is the floor position (if selected), insert connected to your loudspeaker’s the two m8 mounting screws and black terminals (by using the black tighten, ensuring the 5mm O rin

Resumen del contenido incluido en la página 5

MAINTENANCE THERE ARE NO USER SERVICEABLE PARTS CONTAINED IN THIS LOUDSPEAKER SYSTEM. THE DRIVE UNITS ARE VERY SENSITIVE AND MUST NEVER BE SUBJECTED TO MISGUIDED FINGERS! IF SO CERTAIN DAMAGE WILL RESULT AND A REPLACEMENT DRIVER WILL HAVE TO BE SOUGHT. THIS REPLACEMENT WILL NEVER BE CARRIED OUT UNDER GUARANTEE CONDITIONS. Please refer all problems to your dealer. He/She has been trained to deal with any queries you may have regarding this product. Use only a so

Resumen del contenido incluido en la página 6

SERVICE NOTES Service under guarantee is only provided upon presentation of reasonable evidence (e.g. completed guarantee card or purchase receipts) that the date of the claim is within the guarantee period. The guarantee is not valid if the defect is due to accidental damage (including in transport), misuse or neglect and in case of alterations or repair carried out by unauthorised persons. The guarantee may not apply if the product requires modification or adaptation to enable

Resumen del contenido incluido en la página 7

SPECIFICATION C1 Specification Configuration 3 way vented cabinet Cabinet material Complex loaded carbon fibre filled polymer Finish High gloss automotive Drive units 26mm metal dome hf unit 50mm metal dome mf unit 158mm metal coned lf unit (two of) Sensitivity 90dB/1w @1m Nominal Impedance ( Ω) 8 Frequency range (hz) - 6dB points 35 – 44,000 Frequency response (hz) 39 – 41,000 +/- 2dB on reference axis nd Harmonic distortion (2 and 3 rd harmonics) < .0.5% over frequ