Manual de instrucciones de Tannoy CMS801 DC

Resumen del contenido incluido en la página 1

CMS801 DC
Product Description
Features
The Tannoy CMS801 DC is a full bandwidth; high power and high sensitivity ceiling monitor system. The
200mm (8.00") point source Dual Concentric“ driver
TM
200mm (8.00") Tannoy Dual Concentric is a point source drive unit design comprising a multi fibre paper
High power & high sensitivity with extended frequency
pulp mid bass cone and a 25mm (1.00") ferrofluid cooled, titanium dome HF unit with neodymium magnet
response and very low distortion
system. The

Resumen del contenido incluido en la página 2

CMS801 DC TECHNICAL SPECIFICATIONS Transducers System CMS801 DC TM (1) Low Frequency 1 x 200mm (8.00") Dual Concentric Frequency Response (-3dB) 47Hz - 30kHz constant directivity driver with multi fibre BM Back can paper pulp cone (1) Frequency Range (-10dB) 40Hz - 35kHz High Frequency 1 x 25mm (1.00") titanium dome with BM Back can neodymium magnet system (1) Frequency Range (-10dB) 41Hz - 35kHz PI Back can Physical (2) System Sensitivity (1W @ 1m) 92dB (1W = 2.83V for 8 Ohms) Enclosure Nominal

Resumen del contenido incluido en la página 3

CMS801 DC PERFORMANCE MEASUREMENTS 1m on-axis frequency response 100 90 80 70 60 50 10 100 1000 10000 100000 ANECHOIC FREQUENCY Frequency (Hz) RESPONSE Impedance vs frequency 40 30 20 10 0 1 10 100 1000 10000 100000 Frequency (Hz) IMPEDANCE 100 90 80 0 deg 10 deg 20deg 70 30deg 40deg 60 50 10 100 1000 10000 Frequency (Hz) OFF AXIS RESPONSE Beamwidth vs Frequency 360 330 300 270 240 210 180 150 120 90 60 30 0 100 1000 10000 Frequency (Hz) BEAMWIDTH DI vs Frequency 100 10 Q 1 100 1000 10000 DIRECT

Resumen del contenido incluido en la página 4

CMS801 DC PERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE) 100Hz 250Hz 125Hz 315Hz 0 0 160Hz 400Hz 200Hz 500Hz 330 0 30 330 0 30 -12 -12 300 60 300 60 -24 -24 -36 -36 270 90 270 90 -48 -48 630Hz 1.6kHz 800Hz 2.0kHz 0 0 1.0kHz 2.5kHz 1.25kHz 3.15kHz 330 0 30 330 0 30 -12 -12 300 60 300 60 -24 -24 -36 -36 270 90 270 90 -48 -48 4.0kHz 10.0kHz 5.0kHz 12.5kHz 0 0 6.3kHz 16.0kHz 8.0kHz 20.0kHz 330 30 330 0 30 0 -12 -12 300 60 300 60 -24 -24 -36 -36 270 90 270 90 -48 -48 anfragen@tannoy.com Tannoy ado

Resumen del contenido incluido en la página 5

CMS801 DC DIMENSIONAL SKETCHES 327.8 286.4 310.5 [12.90"] [11.27"] [12.22"] 5.0 [0.20"] 325.0 [12.80"] CMS801 DC BM TEMPLATE HOLE CUTOUT SIZE - 295mm (11.61 ) 286.4 [11.27"] 118.7 [4.67"] 5.0 [0.20"] 325.0 [12.80"] CMS801 DC PI TEMPLATE HOLE CUTOUT SIZE - 295mm (11.61 ) anfragen@tannoy.com Tannoy adopts a policy of continuous improvement and product specification is subject to change. CMS801 DC data file // issue 1.07// 15.07.08

Resumen del contenido incluido en la página 6

CMS801 DC DIMENSIONAL SKETCHES The PI back can accepts direct connection to installed conduit in two ways using squeeze connectors: 168.5 [6.63"] 1 22mm (0.87") via the clamp location at the rear after first removing cable clamp 397.0 291.4 365.0 [11.47"] [15.63"] [14.37"] 8.8 151.2 2 Any of the three knock-out points at the [0.35"] [5.95"] side 19mm / 22mm / 28mm (0.75" / 0.87" / 1.10") CMS801 PI BACK CAN TEMPLATE HOLE CUTOUT SIZE - 295mm (11.61 ) 366.00 [14.41"] SUPPLIED ACCESSORIES OPTIONAL A

Resumen del contenido incluido en la página 7

CMS801 DC Architectural Specifications The Ceiling Monitor System shall consist of a 200mm (8.00") full range, point source, constant directivity Dual ConcentricTM transducer and passive frequency dividing network mounted in a vented, injection moulded, paintable front baffle in UL94V-0 ABS material. The back can in both PI (pre-install) & BM (blind-mount variants) shall be constructed of zinc plated steel. A recessed termination box shall be integrated with the back can, a removable locking con

Resumen del contenido incluido en la página 8

CMS801 DC NOTES anfragen@tannoy.com Tannoy adopts a policy of continuous improvement and product specification is subject to change. CMS801 DC data file // issue 1.07// 15.07.08