Manual de instrucciones de Peavey SP 2X

Resumen del contenido incluido en la página 1

PEA VEY ELECTRONICS
SPECS
™
SP 2X
SPECIFICATIONS
Frequency response, 1 meter
on-axis, swept-sine in anechoic
environment:
53 Hz — 16 kHz (±3 dB)
Usable low frequency limit
(-10 dB point):
44 Hz
Power handling:
Full Range:
500 W continuous
1,000 W program
2,000 W peak
Low Frequency Section:
500 W continuous
1,000 W program
2,000 W peak
High Frequency Section:
60 W continuous
120 W program
240 W peak
Sound pressure level, 1 Watt,
High Frequency Section:
Crossover frequency (internal
1 meter in

Resumen del contenido incluido en la página 2

frequency driver from unforeseen accomplished through the use of a Input connections: ® accidents. specially selected dynamically resistive 2x 1/4 in. phone jack and 1x Neutrik ® A voicing switch on the input cup light bulb. If the bulb in your Sound Guard NL4 Speakon (Biamp only) allows for the selection of two different III should ever burn out a replacement Enclosure materials and finish: response settings for the loudspeaker may be obtained from an Authorized 3/4" OSB finished in black carpe

Resumen del contenido incluido en la página 3

upon having a minimum of 3 dB of This product is manufactured under U.S. Architectural and Engineering amplifier headroom available. Patent 6,064,745. Specifications The loudspeaker system shall have an Harmonic Distortion 3 + 2 YEAR LIMITED WARRANTY operating bandwidth of 53 Hz — 16 kHz. Second and third harmonic distortions vs. NOTE: For details, refer to the The nominal output level shall be 98.0 dB frequency are plotted in figures 3 and 4 for warranty statement. Copies of when measured at

Resumen del contenido incluido en la página 4

™ SP 2X INPUT Features and specifications subject to change without notice. Peavey Electronics Corporation • 711 A Street • Meridian • MS • 39301 (601) 483-5365 • FAX (601) 486-1278 • www.peavey.com ©2001 Printed in the U.S.A. 3/01 80304850