Resumen del contenido incluido en la página 1
CD-RECEIVER
KDC-W4037
KDC-W3537
KDC-W3037
KDC-W311
KDC-W237
INSTRUCTION MANUAL
© B64-3554-00/00 (E0/E20)
Resumen del contenido incluido en la página 2
Contents Safety precautions 3 Menu system 20 Menu System Notes 4 Security Code Touch Sensor Tone General features 7 Manual Clock Adjustment Power Synchronize Clock Selecting the Source DSI (Disabled System Indicator) Volume Selectable Illumination Attenuator Dimmer Audio Control Switching preout Audio Setup Supreme Setting Bass Boost News Bulletin with Timeout Setting Speaker Setting Local Seek Switching Display Tuning Mode Subwoofer Output AF (Alternative Frequency) Theft Deterrent Faceplate Re
Resumen del contenido incluido en la página 3
Safety precautions About CD players/disc changers connected 2WARNING to this unit To prevent injury or fire, take the following Kenwood disc changers/ CD players released in 1998 precautions: or later can be connected to this unit. • To prevent a short circuit, never put or leave any Refer to the catalog or consult your Kenwood dealer metallic objects (such as coins or metal tools) inside for connectable models of disc changers/ CD players. the unit. Note that any Kenwood disc changers/ CD
Resumen del contenido incluido en la página 4
Notes • If you experience problems during installation, Cleaning the Unit consult your Kenwood dealer. If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. • When you purchase optional accessories, check with If the faceplate is stained badly, wipe the stain off with your Kenwood dealer to make sure that they work a cloth moistened with neutral cleaner, then wipe it with your model and in your area. again with a clean soft dry cloth. • The charac
Resumen del contenido incluido en la página 5
About Audio file Handling CDs • Playable Audio file • Do not touch the recording surface of the CD. MP3 (.mp3), WMA (.wma) • Do not stick tape etc. on the CD, or use a CD with tape stuck on it. • Playable disc media • Do not use disc type accessories. CD-R/RW/ROM • Clean from the center of the disc and move • Playable disc file format outward. ISO 9660 Level 1/2, Joliet, Romeo, Long file name. • When removing CDs from this unit, pull them out Although the audio files are complied with the
Resumen del contenido incluido en la página 6
Notes This Product is not installed by the manufacturer of a About DAB Tuner control vehicle on the production line, nor by the professional (KDC-W4037/KDC-W3537) importer of a vehicle into an EU Member State. Refer to A group on the Instruction manual of DAB Tuner KTC-9090DAB (optional accessory) for the control method of DAB Tuner function. Information on Disposal of Old Electrical However, the following control methods of the and Electronic Equipment (applicable for function for this u
Resumen del contenido incluido en la página 7
General features Release button Control knob Auxiliary input Clock display ATT indicator * An equipment such as a portable audio player can Power be connected to the auxiliary input terminal using a commercially available mini-plug (3.5ø). Turning ON the Power Press the [SRC] button. ⁄ • This unit automatically turns full power OFF after 20 ⁄ minutes lapses in Standby mode in order to save the • When the power is ON, the (page 20) is vehicle's battery. displayed as "CODE
Resumen del contenido incluido en la página 8
General features Press a button other than the [VOL] knob and [ATT] Attenuator button. Turning the volume down quickly. Press the [ATT] button. Each time you press the button, the Attenuator turns ON and OFF. When the Attenuator is ON, the "ATT" indicator Audio Setup blinks. Setting the Sound system, such as Volume offset. 1 Select the source to adjust Press the [SRC] button. 2 Enter Audio Setup mode Audio Control Press the [VOL] knob for at least 1 second. 1 Select the source to adjust 3 Sele
Resumen del contenido incluido en la página 9
In CD & External disc source Speaker Setting Information Display Fine-tuning so that the System Q value is optimal Disc title "D-TITLE" when setting the speaker type. Track title "T-TITLE" 1 Enter Standby Play time & Track number "P-TIME" Press the [SRC] button. Clock "CLOCK" Select the "STANDBY" display. In Audio file source 2 Enter Speaker Setting mode Information Display Press the [VOL] knob. Song title & Artist name "TITLE" 3 Select the Speaker type Album name & Artist name "ALBUM" Turn the
Resumen del contenido incluido en la página 10
General features Theft Deterrent Faceplate TEL Mute The faceplate of the unit can be detached and taken The audio system automatically mutes when a call with you, helping to deter theft. comes in. Removing the Faceplate When a call comes in Press the Release button. "CALL" is displayed. The faceplate unlocks, allowing you to detach it. The audio system pauses. € Listening to the audio during a call • The faceplate is a precision piece of equipment and can Press the [SRC] button. be damaged by
Resumen del contenido incluido en la página 11
Tuner features Control knob ST indicator Band display Frequency display Preset station number Function of KDC-W237 Tuning Tuning Mode Selecting the station. Choose the tuning mode. 1 Select tuner source Press the [AUTO] button. Press the [SRC] button. Each time you press the button, the Tuning mode Select the "TUNER" display. alternates between the modes shown in the table 2 Select the band below. Push the Control knob towards [FM] or [AM]. Tuning mode Display Operation Each time you push
Resumen del contenido incluido en la página 12
Tuner features Station Preset Memory Preset Tuning Putting a station in the memory. Recalling the stations in the memory. 1 Select the band 1 Select the band Push the Control knob towards [FM] or [AM]. Push the Control knob towards [FM] or [AM]. 2 Select the frequency to put in the memory 2 Recall the station Push the Control knob towards [4] or [¢]. Press the desired [1] — [6] button. 3 Put the frequency in the memory Press the desired [1] — [6] button for at least 2 seconds. The preset number
Resumen del contenido incluido en la página 13
Function of KDC-W4037/KDC-W3537/KDC-W3037/KDC-W311 RDS features Control knob PTY indicator TI indicator Traffic Information ⁄ • Traffic information can be switched when it is on the Changing to traffic information automatically when Tuner Source. However, you cannot switch the Traffic a traffic bulletin starts even when you are not information during reception of the Traffic bulletin listening to the radio. switched from the source other than the Tuner. Press the [TI] button. Each time yo
Resumen del contenido incluido en la página 14
Function of KDC-W4037/KDC-W3537/KDC-W3037/KDC-W311 RDS features PTY (Program Type) ⁄ • Speech and Music include the Program type shown Selecting the Program Type and searching for a below. station. Music: No.12 — 17, 26 — 30 Speech: No.3 — 11, 18 — 25, 31 1 Enter PTY mode • You can put the Program Type in the [1] — [6] button Press the Control knob. memory and for quick recall. Refer to the (page 14). ⁄ • You can change the dis
Resumen del contenido incluido en la página 15
Changing Language for PTY Function Selecting the Program Type display language. 1 Enter PTY mode Refer to (page 14). 2 Enter Changing Language mode Press the [TI] button. 3 Select the language Push the Control knob towards [FM] or [AM]. Each time you push the knob, the language alternates between the languages shown in the table below. Language Display English "ENGLISH" French "FRENCH" German "GERMAN" 4 Exit Changing Language mode Press the [TI] button. | English 15
Resumen del contenido incluido en la página 16
CD/Audio file/External disc control features Control knob Disc number IN indicator Track number Play time Function of KDC-W4037/KDC-W3537 Playing CD & Audio file Playing External Disc When a disc is inserted Playing discs set in the optional accessory disc Press the [SRC] button. player connected to this unit. Select the "CD" display. Press the [SRC] button. ⁄ Select the display for the disc player you want. • When a CD is inserted, the "IN" indicator is ON. Display examples: Pause and
Resumen del contenido incluido en la página 17
Accessory of KDC-W4037/KDC-W3537 Fast Forwarding and Reversing Function of remote control Fast Forwarding Direct Track/File Search Hold down toward [¢] with the Control knob. Doing Track/File Search by entering the track/file Release to resume the playback. number. Reversing 1 Enter the track/file number Hold down toward [4] with the Control knob. Press the number buttons on the remote Release to resume the playback. control. ⁄ 2 Do Track/File Search • There is no sound while the Audio file i
Resumen del contenido incluido en la página 18
CD/Audio file/External disc control features Track/File/Disc/Folder Repeat Random Play Replaying the song, disc in the Disc changer or Play all the songs on the disc or Audio file folder in Audio file folder you are listening to. random order. Press the [REP] button. Press the [RDM] button. Each time you press the button, the Repeat Play Each time you press the button, Random Play turns alternates between the modes shown in the tables ON or OFF. below. When the Random mode is ON, "DISC RDM"/"F
Resumen del contenido incluido en la página 19
Function of Audio file Text/Title Scroll Folder Select Scrolling the displayed CD text or Audio file text. Quickly selecting the folder you want to hear. Push the Control knob toward [FM] for at least 2 seconds. 1 Enter Folder Select mode Press the [F.SEL] button. "FLD SEL" is displayed. During Select mode the folder information is displayed as shown below. Folder name display Displays the current folder name. 2 Select the folder level Push the Control knob towards [FM] or [AM]. With the [FM]
Resumen del contenido incluido en la página 20
Menu system Control knob RDS indicator Menu display Menu System 4 Exit Menu mode Press the [MENU] button. Setting beep sound during operation, etc. ⁄ functions. The Menu system basic operation method is • When other items those applicable to the basic operation method above are displayed, their setting explained here. The reference for the Menu items content chart is entered. (Normally the setting listed at and their setting content is after this operation the top of the chart is the ori
