Resumen del contenido incluido en la página 1
Portable Air Conditioner
Models:
AP14000HS & AP14000W
Owner’s Manual
For more information on other great EdgeStar products on the web, go to http://www.edgestar.com
Resumen del contenido incluido en la página 2
Important Safety Information Improper handling can cause serious damage to the appliance and/or to the user. This portable air conditioner is not intended for use by children. Children should be supervised to ensure that they do not play with this product. Electrical Safety This unit is designed for indoor use only. Do not use the unit in extremely humid or wet environments. Do not wet the housing or control panel. Do not pull the unit by the cord. Always turn the unit
Resumen del contenido incluido en la página 3
Table of Contents IMPORTANT SAFETY INFORMATION ................................................................. I INTRODUCTION ................................................................................................... 1 PARTS IDENTIFICATION ..................................................................................... 2 BACK VIEW .......................................................................................................... 2 FRONT VIEW ..........................
Resumen del contenido incluido en la página 4
Introduction Thank you for purchasing this EdgeStar portable air conditioner. We are glad you chose us. We believe that your purchase of this product opens a relationship between you and EdgeStar. We will provide the customer support needed to nurture that relationship. This manual contains important information regarding the proper installation, use and maintenance of your portable air conditioner. Following this manual will ensure that your product will work at its peak performanc
Resumen del contenido incluido en la página 5
Parts Identification Front View Control Panel Front Air Vent Handle Caster Back View Duct connector Pre-Filter Exhaust hose Air Intake Hose Drain Port Power Cord EdgeStar Portable Air Conditioner 2
Resumen del contenido incluido en la página 6
Installing the Carbon Filter Your portable air conditioner ships with a pre-filter and an activated carbon filter. The carbon filter will help remove contaminates and odors from the air. It is recommended you replace the carbon filter every two to three months, or as needed. It is necessary to clean the pre-filter periodically. Follow the steps below to install the carbon filter: 1. Shut off the unit. Pull the pre-filter towards the hose. CAUTION: Never ope
Resumen del contenido incluido en la página 7
Window Kit Installation Instructions You must vent your portable air conditioner when running in it Preparations for installing cooling mode and heating mode (HS model). Your unit includes a the window kit window exhaust kit that can be used to vent the unit out a window. Before you begin, make sure you have all the parts necessary for installation. Window Kit Parts List: 8 Screws NOTE: Exhaust Covers 2 Grated Adapters may be attached to the Grated Adapters. You
Resumen del contenido incluido en la página 8
Installing the grated adapter 1. Insert the round grated adapters through the back grooved side of the window kit plate with holes. 2. Secure the grated adapters by fastening the screws from flat side of the window kit plate to the holes on the grated adapter. 5
Resumen del contenido incluido en la página 9
Installing the window plates 3. Open your window and place the window kit with grooved side facing outward on the window sill. Then, slide the window kit plates to fit the width of the window. You can use screws to secure the window kit plates from sliding. 4. Lower the window to secure the window kit in place. You CAUTION: Secure your may need to use duct tape to better secure the wind
Resumen del contenido incluido en la página 10
20” Attaching the duct connectors to the exhaust hose A. B. 5. Attach the connectors to the hose: A. Extend the ends of the exhaust hose B. Thread the duct connector on by turning it clockwise until it stops. 6. Roll the unit towards the window kit. Leave a space that is at least 20 inches to the wall. 7
Resumen del contenido incluido en la página 11
Connecting the duct connectors to the unit 7. Align the slots on the duct connector to the tabs and snap into the back of the unit. Connecting the duct connector to the grated adapter 8. Align the slots on the duct connector to the tabs on the grated adapter and snap in place. After you have installed the exhaust hose and window kit, you can plug in your portable air conditione
Resumen del contenido incluido en la página 12
Your portable air conditioner is designed to exhaust condensate Notes about the Exhaust water that is collected from the air. This water, in either gaseous or hose droplet form, will be expelled out the exhaust port of the unit. Please take this into account when deciding how to vent it. 1. The exhaust hose supplied with the portable air conditioner can be extended up to 48 inches; however for maximum efficiency, use the shortest length possible. 2. Try to prevent any kinks or
Resumen del contenido incluido en la página 13
Control Panel Overview LCD Display Water Light WATER POWER Mode Speed Timer Power Button Timer Button Mode Button Up Button Down Button Speed Button Function Power Powers the unit on or off. Mode Changes between cool, dehumidify, fan, and heat (HS model) modes. Speed Sets the fan speed. Timer Used to enable the timer. (Up) Increases the set temperature or timer hours. (Down) Decreases the set temperature or timer hours. Water Light The water light will turn on if the unit h
Resumen del contenido incluido en la página 14
Using the Control Panel Use the Power button to turn the portable air conditioner on and off. Power By default when you first use the power button, the unit should begin to operate in cooling mode. The unit will remember the last used mode/settings if you shut down and restart. Auto-Restart: If power to the unit is interrupted, the air conditioner will restart itself in its last used mode/settings once power is restored. The compressor will restart after 3 minutes. Cooling mo
Resumen del contenido incluido en la página 15
The AP14000HS portable air conditioner can work as a heat pump. It Heat Mode (HS Model Only) must be vented for it to expel the cold air out the exhaust. To operate the unit in heat mode: 1) Make sure the power cord is plugged into a power outlet. 2) Press the Power button. 3) Press the Mode button until the Heat indicator is selected. 4) Adjust the fan speed and temperature to your desired setting. The thermostat is adjustable between 61°F - 80°F in one degree increments. N
Resumen del contenido incluido en la página 16
Remote Control Overview The remote control can be used instead of the control panel to remotely operate your portable air conditioner. The remote’s functions are the same as on the control panel. LCD Display NOTES: Be careful not drop the remote control. Do not Power Button place the remote control in a Down Button Up Button location exposed to direct Mode Button sunlight. Fan Speed Button Timer Button Fahrenheit / Celsius Button Button Function Powers the unit on or off.
Resumen del contenido incluido en la página 17
Remote Control LCD Indicators Transmitter Indicator Speed Indicator Mode Indicators Fahrenheit and Celsius Indicator NOTE: If you used the control Set Temperature Indicator panel to set up the unit, the Timer Indicator remote control will not automatically update the Timed Hours information shown on the remote control’s LCD. Indicators Transmitter Appears when the remote control is signaling the unit. Shows the set fan speed. Fan Speed Low, Medium, and High indicator will
Resumen del contenido incluido en la página 18
Operating the Remote Control Use the Power button to turn the portable air conditioner on Power and off. By default when you first use the power button, the unit will begin to operate in cooling mode. The unit will remember the last used mode/settings if you shut down and restart. Auto-Restart: If power to the unit is interrupted, the air conditioner will restart itself in its last used mode/settings once power is restored. The compressor will restart after 3 minutes. Cooli
Resumen del contenido incluido en la página 19
Fan Only mode is used to circulate the air in your room. No Fan Only Mode temperature setting is needed. To operate the unit in Fan Only mode: 1) Make sure the power cord is plugged into a power outlet. 2) Press the Power button on the remote control. NOTE: Fan Only mode does 3) Press the Mode button until the Fan Only indicator is not require that the exhaust selected. hose be attached. 4) Press the Speed button to select the fan speed. You can choose between Low, Medium
Resumen del contenido incluido en la página 20
The timer can be used to either turn the unit on or off after a number of Timer elapsed hours. The timer is adjustable between 1-24 hours in one hour increments. How to set the unit to automatically turn on: 1) Press the Timer button while the portable air conditioner and remote are powered off. The On Timer [ ] indicator will be blinking. 2) Use the Up and Down buttons to set the number of hours you want to pass before the unit turns on. 3) Wait until the On Timer [ ] ind
