Resumen del contenido incluido en la página 1
ENGLISH
CONTENTS
DIGITAL VIDEO CAMERA
AUTOMATIC DEMONSTRATION 6
GETTING STARTED 7 – 13
RECORDING & PLAYBACK 14 – 22
RECORDING ................................. 15 – 18
GR-DVL220
PLAYBACK ................................... 19 – 22
ADVANCED FEATURES 23 – 50
FOR RECORDING ........................... 24 – 31
Please visit our Homepage on the World Wide Web and
USING THE MENU FOR
answer our Consumer Survey (in English only): DETAILED ADJUSTMENT .............. 32 – 37
DUBBING .........................
Resumen del contenido incluido en la página 2
2 EN Dear Customer, Thank you for purchasing this digital video camera. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of this product. Using This Instruction Manual • All major sections and subsections are listed in the Table Of Contents on the cover page. • Notes appear after most subsections. Be sure to read these as well. • Basic and advanced features/operation are separated for easier reference. It is recommended that you .
Resumen del contenido incluido en la página 3
EN 3 When the equipment is installed in a cabinet or on a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm (3-15/16") or more on both sides, on top and at the rear). Do not block the ventilation holes. (If the ventilation holes are blocked by a newspaper, or cloth etc. the heat may not be able to get out.) No naked flame sources, such as lighted candles, should be placed on the apparatus. When discarding batteries, environmental problems must be consider
Resumen del contenido incluido en la página 4
4 EN SAFETY PRECAUTIONS Do not point the lens or the viewfinder directly into the sun. This can cause eye injuries, as well as lead to the malfunctioning of internal circuitry. There is also a risk of fire or electric shock. CAUTION! The following notes concern possible physical damage to the camcorder and to the user. When carrying, be sure to always securely attach and use the provided shoulder strap. Carrying or holding the camcorder by the viewfinder and/or the LCD monitor can result in drop
Resumen del contenido incluido en la página 5
EN 5 PROVIDED ACCESSORIES AC Adapter AP-V10U, Remote Control Unit RM-V715U AP-V11U or AP-V12U Battery Pack Lens Cap ( pg. 6 for attachment) BN-V408U AAA (R03) Battery x 2 Shoulder Strap (for remote control unit) Audio/Video Cable (ø3.5 mini-plug to RCA plug) NOTE: In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core filter. If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder.
Resumen del contenido incluido en la página 6
AUTO MANUAL MANUAL 6 EN AUTOMATIC DEMONSTRATION MENU/BRIGHT Wheel Automatic Demonstration takes place when “DEMO MODE” is set to “ON” (factory-preset). Automatic Demonstration starts when there is no operation for about 3 minutes after the Power Switch is set to “ ” or “ ” and no cassette is in the camcorder. Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 3 minutes after that, the demonstration will resume.
Resumen del contenido incluido en la página 7
EN 7 GETTING STARTED GETTING STARTED CONTENTS Power.................................................. 8 – 9 Grip Adjustment ......................................... 10 Viewfinder Adjustment.................................. 10 Shoulder Strap Attachment ............................. 10 Tripod Mounting.......................................... 10 Date/Time Settings...................................... 11 Loading/Unloading A Cassette ......................... 12 Recording Mode Setting ...........
Resumen del contenido incluido en la página 8
8 EN GETTING STARTED (cont.) BATT. RELEASE Button Power This camcorder’s 2-way power supply system lets you choose the most appropriate source of power. Do not use provided power supply units with other 1 equipment. CHARGING THE BATTERY PACK 3 2 1 Tilt the viewfinder upward 1. With the arrow on the battery pack pointing downward, push the battery pack slightly against the battery pack mount 2, then slide down the battery pack until it locks in place 3. Power Switch 2 Set the Power Switch to “OF
Resumen del contenido incluido en la página 9
EN 9 ATTENTION USING THE BATTERY PACK Before detaching the power source, make sure that Perform step 1 of “CHARGING THE BATTERY the camcorder’s power is turned off. Failure to do so PACK” ( pg. 8). can result in a camcorder malfunction. Approximate recording time NOTES: Battery ● Recording time is reduced significantly under the LCD monitor on Viewfinder on pack following conditions: • Zoom or Record-Standby mode is engaged BN-V408U 1 hr. 1 hr. 15 min. repeatedly. BN-V416U 2 hrs. 2 hrs. 30 min.
Resumen del contenido incluido en la página 10
MANUAL AUTO 10 EN GETTING STARTED (cont.) Grip Adjustment Power Zoom Lever 1 Separate the Velcro strip. 2 Pass your right hand through the loop and grasp the grip. Recording Start/ 3 Adjust your thumb and fingers through the grip, to Stop button easily operate the Recording Start/Stop button and Power Switch and Power Zoom Lever. Be sure to fasten the Velcro strip to your preference. Power Switch Viewfinder Adjustment 1 Set the Power Switch to “ ” or “ ” Diopter while pressing down the Lock But
Resumen del contenido incluido en la página 11
MANUAL EN 11 MENU/BRIGHT Wheel Date/Time Settings Power Lamp The date/time is recorded onto the tape at all times, but its display can be turned on or off during playback ( pg. 36, 37). 1 Set the Power Switch to “ ” while pressing down the Lock Button located on the switch. The power lamp lights and the camcorder is turned on. 2 Press the MENU/BRIGHT wheel in to access the Menu Screen. 3 Rotate the MENU/BRIGHT wheel to select “ DISPLAY”. Press it and the DISPLAY Menu appears. Power Switch 4 Rot
Resumen del contenido incluido en la página 12
12 EN GETTING STARTED (cont.) Loading/Unloading A Cassette Erase protection tab* The camcorder needs to be powered up to load or eject a cassette. Make sure the window side is 1 Slide and hold OPEN/EJECT in the direction of facing out. the arrow then pull the cassette holder cover open until it locks. The cassette holder opens automatically. • Do not touch internal components. Cassette 2 Insert or remove a tape and press “PUSH HERE” holder to close the cassette holder. • Once the cassette holde
Resumen del contenido incluido en la página 13
MANUAL EN 13 Recording Mode Setting MENU/BRIGHT Wheel Set the tape recording mode depending on your Power Lamp preference. 1 Set the Power Switch to “ ” while pressing down the Lock Button located on the switch. The power lamp lights and the camcorder is turned on. 2 Press the MENU/BRIGHT wheel in. The Menu Screen appears. 3 Rotate the MENU/BRIGHT wheel to select “ CAMERA” and press it. The CAMERA Menu appears. 4 Rotate the MENU/BRIGHT wheel to select “REC Power Switch MODE” and press it. The Su
Resumen del contenido incluido en la página 14
14 EN RECORDING & PLAYBACK RECORDING & PLAYBACK CONTENTS RECORDING ................................. 15 – 18 Basic Recording..................................... 15 Journalistic Shooting ............................... 16 Self-Recording ...................................... 16 Operation Mode .................................... 16 Zooming ............................................ 17 Time Code ........................................... 18 PLAYBACK ................................... 19 – 22
Resumen del contenido incluido en la página 15
AUTO MANUAL AUTO MANUAL EN 15 RECORDING Power lamp Basic Recording Power Switch NOTE: You should already have performed the procedures listed below. If not, do so before continuing. ● Power ( pg. 8) ● Grip Adjustment ( pg. 10) ● Viewfinder Adjustment ( pg. 10) ● Load A Cassette ( pg. 12) ● Recording Mode Setting ( pg. 13) 1 Remove the lens cap. During shooting 2 Set the Power Switch to “ ” or “ ” Lock Button while pressing down the Lock Button located on the switch. Recording Start/Stop But
Resumen del contenido incluido en la página 16
MANUAL AUTO MANUAL AUTO AUTO MANUAL 16 EN RECORDING (cont.) JOURNALISTIC SHOOTING Self- In some situations, different shooting angles may Recording provide more dramatic results. Hold the camcorder in the desired position and tilt the LCD monitor in the most convenient direction. It can rotate 270° (90° downward, 180° upward). SELF-RECORDING You can shoot yourself while viewing your own image in the LCD monitor. Open the LCD monitor and tilt it upward 180° so that it faces forward, then point
Resumen del contenido incluido en la página 17
EN 17 Zoom in (T: Telephoto) FEATURE: Zooming 1xWT PURPOSE: 1x 0WT To produce the zoom in/out effect, or an instanta- 2x 0WT 4x 0WT neous change in image magnification. OPERATION: Zoom In Slide the Power Zoom Lever towards “T”. Zoom Out Zoom out (W: Wide angle) Slide the Power Zoom Lever towards “W”. The further you slide the Power Zoom Lever, the quicker the zoom action. Zoom display NOTES: ● Focusing may become unstable during Zooming. In 1x 0WT this case, set the zoom while in Record-Standb
Resumen del contenido incluido en la página 18
AUTO MANUAL 18 EN RECORDING (cont.) Time Code During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded scene on the tape during playback. If recording starts from a blank portion, the time code begins counting from “00:00:00” (minute:second:frame). If recording starts from the end of a previously recorded scene, the time code continues from the last time code number. To perform Random Assemble Editing ( pg. 43 – 47), time code is necessary. I
Resumen del contenido incluido en la página 19
EN 19 PLAYBACK Stop Button (5) Normal Playback Rewind Button (2) 1 Load a tape ( pg. 12). Play/Pause Button (4/6) 2 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch. To start playback, Fast-Forward Button (3) press 4/6. • To stop playback, press 5. Power Zoom Lever (VOL.) • Press 2 to rewind, or 3 to fast-forward the tape during Stop mode. To Control The Speaker Volume . . . ..... slide the Power Zoom Lever (VOL.) towards “+” to turn up the volume, or tow
Resumen del contenido incluido en la página 20
20 EN PLAYBACK (cont.) Connections These are some basic types of connections. When making the connections, refer also to your VCR and TV instruction manuals. A. Connection to a TV or VCR equipped with an S-VIDEO IN and A/V input connectors To AV To TV or VCR Audio/Video cable White to TV (provided) Connector cover* AUDIO L IN** Red to AUDIO R IN** Yellow: Not connected To S-VIDEO VCR S-Video cable To S-VIDEO IN (optional) * When connecting the cables, open this cover. ** The Audio cable is not
