Resumen del contenido incluido en la página 1
21018
2.4 GHz Dual Cordless Handset
Call Waiting Caller ID
Speakerphone System
User’s Guide
1
We bring good things to life.
Resumen del contenido incluido en la página 2
EQUIPMENT APPROVAL INFORMATION Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. 1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment. You must, upon request, provi
Resumen del contenido incluido en la página 3
TABLE OF CONTENTS EQUIPMENT APPROVAL INFORMATION ...... 2 VIP MELODY ......................... 15 INTERFERENCE INFORMATION .................. 2 STORING VIP MELODY ............ 16 HEARING AID COMPATIBILITY (HAC) ...... 2 CHANGING A STORED VIP MELODY TABLE OF CONTENTS............................ 3 RECORD ................................ 17 FCC RF RADIATION EXPOSURE STATEMENT5 REVIEWING AND DELETING STORED INTRODUCTION .................................... 5 VIP MELODY RECORD ............. 17 HANDSE
Resumen del contenido incluido en la página 4
MUTE .......................................... 23 MEMORY ...................................... 28 RECEIVER VOLUME CONTROL ........... 23 DIALING A NUMBER FROM MEMORY .28 DO NOT DISTURB (DND) .............. 23 CHAIN DIALING FROM MEMORY ........ 29 HANDSET SPEAKERPHONE OPERATION 23 CALLER ID (CID) .............................. 29 ANSWERING A CALL WITH THE CID ERROR CODES ........................ 29 HANDSET...................................... 23 RECEIVING CID RECORDS................ 29 MAKING
Resumen del contenido incluido en la página 5
FCC RF RADIATION EXPOSURE STATEMENT This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a mininum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.” For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with the belt clip supp
Resumen del contenido incluido en la página 6
telephone is a multifunction product for use with Call Waiting and Caller ID services available from your local telephone company. Your Caller ID Call Waiting phone allows you to: • View the name and telephone number of a caller (Call Waiting Caller ID) while you are on the phone. • Identify callers before you answer the phone. • View the time and date of each incoming call. • Record up to 40 Caller ID messages sequentially. • Know who called while you are on the other line or when you were awa
Resumen del contenido incluido en la página 7
HANDSET LAYOUT display del format/conf (delete button) (format/conference button) cid/vol (up or down arrow) TALK/END/ (caller ID/volume button) callback (button) SPKR (speaker button) #pause/ringer (button) *exit (button) redial (button) mem (memory button) page/int flash (button) (page/intercom button) mute/prog (mute/program button) 7
Resumen del contenido incluido en la página 8
BASE LAYOUT in use/charge (indicator) PAGE (button) Back Side do not disturb (button) HANDSET CHARGE CRADLE LAYOUT AC power supply charge (indicator) 8
Resumen del contenido incluido en la página 9
PARTS CHECKLIST Make sure your package includes the items shown here. AC power supply Dual Handsets Belt clips Two Handset battery packs Base Telephone line cord Handset Charge Cradle TELEPHONE JACK REQUIREMENTS Wall plate To use this phone, you need an RJ11C type modular phone telephone jack, which might look like the one Modular pictured here, installed in your home. If you don’t have a telephone line jack modular jack, call your local phone company to find out how to get one installed. 9
Resumen del contenido incluido en la página 10
INSTALLATION INSTALLATION NOTE: Some cordless telephones operate at frequencies that may cause interference to nearby TVs, microwave ovens, and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV, microwave ovens, or VCR. If such interference continues, move the cordless telephone farther away from these appliances. Certain other communications devices may also use the 2.4 GHz frequency for communication, and, if not prop
Resumen del contenido incluido en la página 11
INSTALLING THE PHONE Choose the best location to install your base and handset charge cradle. Your base and handset charge cradle should be placed on a level surface such as a desk or table top. CONNECTING THE AC (ELECTRICAL) POWER 1. On the base, plug one end of the power supply cord into the power jack on the back of the base and the other end into an electrical outlet. CAUTION: Use only the ATLINKS USA, Inc. power supply 5-2648 that came with this unit. Using other power supplies may damage t
Resumen del contenido incluido en la página 12
INSTALLING THE HANDSET BATTERY NOTE: You must connect the handset battery before use. 1. Push down on the top of the battery compartment cover (located on the back of each handset) and remove the cover. 2. Lift the battery pack and connect it's plug to the jack inside the compartment. NOTE: It is important to maintain the polarity (black and red wires) to the jack inside the compartment as shown in the illustration. 3. Close the battery compartment by pushing the cover up until it snaps into pla
Resumen del contenido incluido en la página 13
PROGRAMMING THE TELEPHONE STANDBY SCREEN The handset displays the handset number and user name. USER NAME HANDSET X PROGRAMMING FUNCTIONS The system uses a menu structure to give you access to all of the built-in features. You may program the following items in main menu: Room Monitor, Handset Setup. ROOM MONITOR 1. Make sure your phone is OFF (not in talk mode). 2. Press the MUTE/PROG button to go to the main menu. > ROOM MONITOR HANDSET SETUP 3. Press CID/VOL (/\ or V) button to scroll to RO
Resumen del contenido incluido en la página 14
NOTE: While in room monitoring mode, the originating handset can be switched to monitor by speaker mode by pressing the SPKR button once. Switch back to earpiece by pressing the TALK/END/CALLBACK button once. NOTE: Press the *EXIT button on the handset to exit room monitor mode. HANDSET SETUP 1. Make sure your phone is OFF (not in talk mode). 2. Press the MUTE/PROG button to go to the main menu. 3. Press CID/VOL (/\ or V) button to scroll to HANDSET SETUP. 4. Press MUTE/PROG button to confirm an
Resumen del contenido incluido en la página 15
3. Use the touch-tone pad to enter a name (up to 15 characters). More than one letter is stored in each of the number keys. For example, to enter Bill Smith, press the 2 key twice for the letter B. Press the 4 key 3 times for the letter I. Press the 5 key 3 times for the letter L. Press the 5 key 3 times for the second letter L, and press the 1 key to insert a space between the first and last name. Press the 7 key 4 times for the letter S; press the 6 key once for the letter M; press the 4 key 3
Resumen del contenido incluido en la página 16
VIP MELODY This features allow you to assign a specific melody to someone you want to get your attention when the person calls. When a VIP melody is assigned and that person calls, the unit rings the normal ring for the first ring and then follows with VIP melody ring. You may choose from ten different polyphonic melodies and may store up to 10 VIP records. NOTE: This feature ONLY works when the following conditions are met. 1. You have subscribed to Caller ID. 2. You have your Caller ID record
Resumen del contenido incluido en la página 17
11. Press CID/VOL (/\ or V) button to select from melody 01 to melody 10 (a testing tone is generated while making melody selection) 12. Press MUTE/PROG button to confirm. NOTE: If the desired number/record was previously stored in any one of the ten VIP melody records, "DUPLICATE NUMBER" shows in the display. CHANGING A STORED VIP MELODY RECORD Use the Storing VIP Melody procedure to change the number of a selected record and replace the old phone number with new phone number. When REPLACE VIP#
Resumen del contenido incluido en la página 18
3. Use the touch tone pad on the handset to select 1 or 2, or use the CID/ VOL (/\ or V) button to scroll to your selection. 1ON is the default setting. 4. Press the MUTE/PROG button to confirm and the key tone setting shows in the display. REGISTRATION This setting may be made with the handsets only. Your dual handsets are pre-registered and ready to use. It is not recommended that handset be registered again unless absolutely necessary. 1. If necessary, press the MUTE/PROG button to go to the
Resumen del contenido incluido en la página 19
4. If you select 1 YES, press the MUTE/PROG button and MOVE NEAR TO BASE displays for 2 seconds, then CONFIRM? 1 YES 2 NO appears in the display. 5. Press the touch-tone pad to select 1 YES or 2 NO, or use the CID/VOL (/\ or V) button to scroll to 1 YES or 2 NO. 6. If you select YES, press the MUTE/PROG button to confirm. You will hear a confirmation tone. Then HANDSET X DEREGISTERED shows in the display to confirm the handset is deregistered. NOTE: When you complete the de-registration proces
Resumen del contenido incluido en la página 20
2. Press the MUTE/PROG button to enter the menu. DEFAULT SETTING 1YES 2NO shows in the display. 3. Use the touch-tone pad to select 1 YES or 2 NO, or use the CID/VOL (/\ or V) button to move the cursor to 1 YES or 2 NO. 2 NO is default setting. NOTE: If you choose “YES” all the settings in the programmable menu are returned to factory default setting. 4. Press the MUTE/PROG button to save your selection. You will hear a confirmation tone. TELEPHONE OPERATION CHARGE INDICATOR When the IN USE/CHAR
