Resumen del contenido incluido en la página 1
PAN • TILT • ZOOM COLOR CAMERA
-
PTC 200C
INSTRUCTION MANUAL
Please read this instruction manual carefully before using this PTC-200C
and keep it for future reference.
Resumen del contenido incluido en la página 2
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus outdoors. 6. Do not use this apparatus near water. 7. Clean only with dry cloth. 8. Do not install near heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. 9. Do not touch this apparatus during lightning storms. 10.Unplug when unused for long periods of time. 11.Refer al
Resumen del contenido incluido en la página 3
CAUTION INFORMATION RISK OF ELECTRIC This equipment has been tested SHOCK DO NOT OPEN and found to comply with the CAUTION : TO REDUCE THE RISK OF limits for Class A digital device, ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). pursuant to Part 15 of the FCC NO USER SERVICEABLE PARTS INSIDE. Rules. These limits are designed REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. to provide reasonable protection against harmful interference The lightning flash with arrowhead symbol, withi
Resumen del contenido incluido en la página 4
HANDLING PRECAUTIONS Be sure to use the provided AC adapter. Do not leave the Camera under direct sunlight or by heater, or the Camera may be discolored, or damaged. Do not place the Camera in any humid, dusty, windy or vibrating location. Use the Camera in the following environmental condition: Temperature: 0 °C ~ 40 °C (32 ° ~ 104 °F) Humidity: 30% ~ 85% (No condensation) Use a soft, dry cloth for cleaning. Do not use any volatile solvent, such as thinner or benzine. Do not directly point the
Resumen del contenido incluido en la página 5
CONTENTS IMPORTANT SAFETY INSTRUCTIONS .........................................1 HANDLING PRECAUTIONS ............................................................3 1. PART NAMES AND FUNCTIONS....................................................5 ............................................. 2. WIRELESS REMOTE CONTROLLER 7 .................................................................................... 3. SETTING UP 9 ........................................................ 4. OPERATION PROCE
Resumen del contenido incluido en la página 6
1. PART NAMES AND FUNCTIONS Overall View This camera is designed to mount on ceiling panels only. - 5 -
Resumen del contenido incluido en la página 7
Wireless Remote Controller 15 RESET 1 POWER 14 BACK LIGHT 17 ID 16 PRESET 2 OPEN 5 NEAR 3 18 NUMBER (1 6) CLOSE 6 FAR 4 AUTO 7 AUTO 11 HOME 10 Directions 8 TELE 9 WIDE 12 13 MENU CURSOR/PAN-TILT No. Button Name Function Reference Page 1 POWER To turn ON/OFF the Camera power. P.19 2 OPEN To open the iris manually. P.16 3 CLOSE To close the iris manually. P.16 4 AUTO To iris automatically. P.16 5 NEAR To move the focus near. P.16 6 FAR To move the focus far. P.16 7 AUTO To focus automatically. P.
Resumen del contenido incluido en la página 8
2. WIRELESS REMOTE CONTROLLER Point the infrared emitting window of the wireless remote controller at the infrared sensor of the Camera, located at the front, and the rear panel, and select the desired function. Receivable range Note: The infrared sensors may receive the infrared rays only within a narrower receivable range or may not receive them at all depending on the ambient environment, such as being placed under the sunlight or near an inverter fluorescent lamp. In such case, relocate the
Resumen del contenido incluido en la página 9
Preparation Remove the battery case cover by pressing downward on the [ ] mark part in the direction as indicated by the arrow. Install 2 pcs. of batteries (type R03,AAA) into the case in the direction as indicated there. Note: Install the batteries with the proper to and to polarity. Note: For dry cells, be sure to use the size AAA. Note: Change the batteries at least once a year or when even nesessary. Note: The batteries supplied with the Camera are only for use in initially confirming the
Resumen del contenido incluido en la página 10
3. SETTING UP [1] Installation Note: When carrying the Camera, be sure to hold the base. Note: Do not turn the Camera head in the PAN-TILT direction by hand, or the Camera head may be broken. (1) Mounting the Fixing Plate • Put 4 Hexagon Head Bolts M5x40 (supplied) through the Fixing Plate, and screw the Fixing Plate to the Main Unit with 4 Screws M3x5 (supplied). Note: For fastening the Fixing Plate, be sure to use the 4 Phillips-head Screw M3x5 (supplied). Be careful that using any screws o
Resumen del contenido incluido en la página 11
(2) Making mounting holes to the Ceiling Tile Make 4 holes of 8mm (5/16 in.) to the • Ceiling Tile as shown. - 10 -
Resumen del contenido incluido en la página 12
(3) Fixing the Main Unit • Put the Ceiling Tile between the Main Unit and the Ceiling Plate, and fix the Main Unit by fastening 4 Wing Nuts. - 11 -
Resumen del contenido incluido en la página 13
(4) Mounting the Safety Wires • Loop up one end of the Safety Wires through the respective safety wire looping holes made on the Ceiling Plate, and then loop up the other end of the same around the beams or anything that is used to mount ceiling tile channel for structure safety. - 12 -
Resumen del contenido incluido en la página 14
Connection examples for the Camera - 13 -
Resumen del contenido incluido en la página 15
4. OPERATION PROCEDURES [1] Power supply to the Camera The Camera has no POWER switch. Power is supplied to the Camera when the AC adapter is connected to the wall socket and the Camera. When power is supplied to the Camera, the Camera turns to the right and then to the center automatically (viewed from the front), returning the Camera position to the detault home position. [2] Turning ON/OFF of the Camera power (1) Turning OFF the Camera 1 • When the Camera is ready for operation 17 through
Resumen del contenido incluido en la página 16
[3] Operating PAN/TILT • While watching the screen, press any of 10 15 (UP, DOWN, LEFT, RIGHT) direction buttons for the direction in which you want to watch the image. • To change the direction minutely, jog the direction button. To change the direction 11 largely, hold down the direction button. 10 • Two operation modes are available according to the speed: AUTO mode changing the speed according to the zoom position, and MANUAL mode setting the speed manually. (Refer to the settings in the OS
Resumen del contenido incluido en la página 17
[4] Lens operation (1) Zoom operation • The object is zoomed in (appears larger in the 8 screen) when TELE button of ZOOM is 2 pressed, or zoomed out (appears smaller in the 5 3 6 9 screen) when WIDE button of ZOOM is 4 7 pressed. 9 • When 8 TELE button or WIDE button is 8 held down for over one second, the zoom speed 9 increases. (2) Focus operation • When 7 AUTO button of FOCUS is pressed, FULL AUTO FOCUS status is established. (However, focusing may be difficult for such objects as list
Resumen del contenido incluido en la página 18
[5] BLC (Back Light Control) In case the back lighting is too bright to shoot the 14 main object clearly, press BACK LIGHT 14 button. To cancel this mode, press the button. [6] Preset operation The Camera head direction, the zoom position, the focus status and the brightness level can be registered for as many as six settings. 16 The registration contents will be retained even if 18 the Camera power is turned OFF. (1) Setting presets • Set the Camera head direction, the zoom position, the focus
Resumen del contenido incluido en la página 19
5. THE ID NUMBER SETTING When multiple Cameras are laid out adjacently and operated via the wireless remote controller, the Cameras receiving the infrared rays operate in unison in the same way. When each Camera is allocated with a different ID No., the Camera can be controlled independently when its ID No. is specified via the wireless remote controller. The ID Nos. can be allocated for up to 6 Cameras. (1) Setting an ID No. • Turn ON only the camera to be set with an ID 17 No. Leave other adja
Resumen del contenido incluido en la página 20
6. OSD (On-Screen Display) 12 The MENU button is used to turn ON/OFF 1 the OSD display. When the Sub menu is 14 displayed, the screen goes back to the previous screen. 10 When the OSD display is available, 11 11 direction buttons and HOME button 12 function as the menu operation keys. 10 To halt the menu operation and perform the PAN- 13 13 TILT operation, press CURSOR/PAN-TILT 13 button. To resume the menu operation, press CURSOR/PAN-TILT button again. OSD Display menu <> (1) MA
